aiwa AI6016 Wireless Party Speaker User Manual
- June 16, 2024
- Aiwa
Table of Contents
aiwa AI6016 Wireless Party Speaker
WHAT’S INCLUDED
- Al6016 Wireless Party Speaker
- USB Charging Cable
- User’s Manual with Warranty Information
A CLOSER LOOK
- PowerNolume Knob
- DCSV Charging Port
- Previous Button
- AUX-IN Port
- USB Port
- TF Card Port
- Microphone Port
- LED Light Indicator
- Mode/LED Button
- LCD Display Screen
- Next Button
- Pause/Play Button
CHARGING
- Insert one end of the included Micro-USB charging cable (included) into the DC SV charging port on your speaker.
- Insert the other end into the USB port of a computer or suitable USB charging adapter.
POWERING ON/OFF
- Twist the power knob clockwise to power your speaker ON.
- After powering ON, the speaker will automatically go into Bluetooth pairing mode.
- Twist the power switch all the way counter-clockwise to power your speaker OFF.
BLUETOOTH PAIRING
Power on your speaker. Then press the mode button repeatedly to toggle through
your speaker’s various modes. Make sure BT (Bluetooth) mode is selected.
NOTE : Your speaker has three modes:
- Select BT mode to pair your speaker to a Bluetooth-enabled device.
- Select AUX mode to listen to music from a device connected to your speaker’s AUX IN port. –Select USB mode to listen to music from a connected USB drive.
- Select TF Mode to listen to music from an inserted memory card.
ADDITIONAL NOTE: Press and hold the Mode button to change the speaker’s lighting modes.
Go to the Bluetooth settings menu on your phone. Make sure that Bluetooth is turned on. Connect to the device listed as ‘AIWA Wireless Speaker’.
LISTENING TO MUSIC
- Press the button to go back to the last track in a playlist. Press and hold to decrease the volume.
- Press the ►? button to go to the next track in a playlist. Press and hold to increase the volume.
- Press the ►II button to play or pause a track.
Twist the Volume Knob clockwise to increase the volume. Turn counterclockwise to decrease the volume.
LIGHT CONTROL
Press and hold the Light button to switch the light mode.
ADDITIONAL FEATURES
-
TWS Function
If you have two Al6016 speakers, enjoy high-quality sound by using the TWS pairing function.
First power on both speakers and put them in Bluetooth mode.
Next, pair your phone/tablet etc to the first speaker in the normal way. After a successful connection, double-click the pause/play button.you will hear the sound ‘didi’ on the second speaker, which means TWS connects successfully.
You can now play music to both speakers at the same time.
If you want to disconnect the TWS function, long press the pause/play button on the second speaker. -
USB Port
Insert a USB drive into the USB port on your speaker. On USB mode, the speaker will play any .MP3 files found on the USB drive. -
AUX IN Port
Connect one end of a 3.5mm Aux cable (not included) to the Aux In port on your speaker. Connect the other end to the headphone jack on your audio device in order to listen to music using a wired connection. -
TFCard Port
Insert a memory card into the TF card port on your speaker. On TF mode, the speaker will play any .MP3 files found on the memory card. -
MIC IN Port
Insert a microphone connector (not included) into the MIC IN Port.
SAFETY PRECAUTIONS
When using your speaker, basic safety precautions should always be followed including:
- READ ALL INSTRUCTIONS BEFORE USING YOUR SPEAKER.
- Do not submerge your speaker in water.
- Only clean using a clean cloth.
- Do not allow children to play with this product. This product contains small pieces that can be a choking hazard. Parental supervision is advised.
- Do not expose this product to excessive heat or fire.
- Do not expose this product to temperatures above 100°F. Keep out of direct sunlight.
- Do not attempt to repair this product yourself. Contact a qualified service center if the product needs service.
- Do not drop, crush, or expose this product to excessive physical force.
- This product is not intended for commercial use.
- When charging, keep all charging cables well-ventilated. Do not keep your charging cable in contact with flammable materials such as bedding, linens or synthetic fabrics.
Maintenance and Care
- Use a soft cloth or paper towel to clean your speaker. Never use any harsh chemicals or detergents for cleaning. Make sure your speaker is dry before charging.
- When your speaker is not in use, it should be stored in a cool, dry place.
- Never tug or yank on a cable while it is connected to your speaker. Connect and disconnect cables as carefully as possible.
- Never expose your speaker to high temperatures or extreme cold.
- Please recycle or dispose of your speaker properly based on the laws and rules of your municipality. Contact local recycling facilities and/or the manufacturer of your speaker for further information.
FCC STATEMENT
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
This equipment has been tested and found to comply with the limits for a Class
B digital device, under Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used by the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
SPECIFICATIONS
- Bluetooth Version : vs.a
- Bluetooth Range : Up to 33 feet (10 meters)
- Power Supply: DC SV/1 A (USB)
- Battery Type : 3.7V 800mah Lithium Ion Battery
- Play Time : Up to 4 hours*
- Applicable at 50% of maximum volume. Results will be lower when the volume is higher.
WARRANTY
This warranty covers the original consumer purchaser only and is not
transferable.
This warranty covers products that fail to function properly UNDER NORMAL
USAGE, due to defects in material or workmanship. Your product will be
repaired or replaced at no charge for parts or labor for one year.
What Is Not Covered By Warranty
Damages or malfunctions not resulting from defects in material or workmanship
and damages or malfunctions from other than normal use, including but limited
to, repair by unauthorized parties, tampering, modification or accident.
To Obtain Warranty Service and Troubleshooting Information:
Call 877-397-8200 or visit our website
at www.aiwa.com.
To receive a Warranty service along with the name and address of an authorized
product service center, the original consumer purchaser must contact us for
problem determination and service procedures. Proof of purchase in the form of
a bill of sale or receipted invoice, evidencing that the product is within the
applicable Warranty period(s), MUST be presented to obtain the requested
service. It is your responsibility to properly package and send any defective
products along with a dated copy of proof of purchase, a written explanation
of the problem, and a valid return address of the authorized service center at
your expense. Do not include any other items or accessories with the defective
product. Any products received by the authorized service center that are not
covered by warranty will be returned unrepaired.
©2023 Sakar International 195 Carter Drive Edison, NJ 08817
www.sakar.com
Support: (877)-397-8200
support@sakar.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>