ZYAN Smart Bird Feeder User Guide
- June 16, 2024
- ZYAN
Table of Contents
Set Up With Vicohome App
Smart Bird Feeder
https://www.vicohome.io/download/
Download Vicohome App from App Store or Google Play. You can also download the App by scanning the QR code above with the QR code scanner in your smartphone
Pair the Camera to your Phone App
Note: Before installing your bird feeder and camera, please setup your camera
first. Set up the camera
Step1: Go to your App Store or Google Play on your smartphone, search for
“Vicohome” Or just scan the QR code below to download the app:
https://www.vicohome.io/download/
Then please sign up for a new account, please check the screenshot below for your reference:
-
Tap “Sign up for a new account”
-
Input your user name, your country “the United State” , and your
E-mail address. And then check on the “Agreement and Privacy policy Let’sgoto “NextStep” .
-
You will receive the Verification Code from your E-mail, put it inandthengoto “NextStep” .
-
Set password for your account, and then go to “Done” .
-
Congratulations You have already registered successfully.
Let’s tapthe “+” icon to add the camera now!
Step 2:
Hold the power button to power up the camera, the indicator light will keep
blue. And finally you will hear the pairing sound from the camera, which means
that the camera is ready for connection.
- If you hear the sound from the camera, please goto “Next Step” .
- The device is found, please tap the device at this page.
- Connect WIFI to the camera,select your network and input your WIFI password.
- Tap “Join” , please.
- Wait for a second,you will see this page and the camera would say “WIFI connected” . You’re almost done.
- Set a name for the device and goto “Next Step” .
- Check your WIFI signal strength, tap “Done” .
- Here we goltapthe “play” icon,you will see the camera image.
About Cloud Storage and Bird Fans Plan
How to get 30 days of free cloud storage
For new register we have 30 days free cloud storage
- Please go to Vicohome app, then tap try it free.
- Please go to “Bird Fans Plan” get it free.
- After one month this service needs to be subscribed.
Step1:
The invitee needs to download the Vicohome APP on her/his smartphone.
Step2:
After installing and registering a new account to login, just go to the app
homepage, tap on the “+” sign in the upper right corner, and then select “Add
friend’’s device” . Then please scan the QR code of device admin.
How to find the device admin QR code?
See the screenshot below.Just go to the administrator’s
Vicohome app. Go to the settings icon > Share > Device Sharing then you will
see the QR code. (QR code valid within half an hour) 
Al Identification
Abird came to the bird feeder and triggered the camera recording and Al Identification.
Frequently Asked Questions
Q1: Why doesn't the Wi-Fi name appear when connect to Wi-Fi?
Q2: Will the camera show red lights when night vision is activated?
A2: The built-n infrared lamp beads make the camera only show some dim red lightswhen night vision is activated, but the image qualityis still clear under no lightenvironment.
Q3: What are the requirements for Wi-Fi?
A3: Please use a 24GHz wireless network The device does not support the 5GHzwireless network. Meanwhile, please set the Wi-Fi authentication method to wpa2-pskor other lower level of the security method. A password is required.
Q4: How far should the camera be placed from the router?
Ad: After testing, the WiFi connection distance can normally reach up to 100 meters inthe open area. However, the actual situation depends on the strength of Wi-Fi and itssurrounding environment.
Q5: What s the maximum length of recording time?
Q6: What should | do when the device is malfunctioning?
A6: Long press the power button to restart the camera.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>