LUCIDE GILLY Floor Reading Lamp Instruction Manual
- June 4, 2024
- LUCIDE
Table of Contents
GILLY Floor Reading Lamp
Instruction Manual
GILLY Floor Reading Lamp
Thank you for purchasing a Lucide original!
This manual will hopefully guide you easily through the installation process.
We aim to inspire and illuminate our clients by offering trendy, high-quality
and affordable lighting.
Welcome to the community of #illuminatesyourworld
DISCOVER OUR COLLECTION!| CURIOUS ABOUT OUR BRAND|
#ILLUMINATESYOURWORLD
---|---|---
| |
https://eprel.ec.europa.eu/qr/941844|
https://eprel.ec.europa.eu/qr/941844| https://eprel.ec.europa.eu/qr/941844
Visit our website and discover
our entire collection| Our brand video gives you a glimpse behind the scenes
at Lucide| Take a look at how others around the world use Lucide products
Follow us for the latest lighting trends!
ZENITH
Item number: 19791/24/12
EAN code: 5411212193889
https://eprel.ec.europa.eu/qr/941844
General
Dimensions LxWxH: 25,4cm x 53,2cm x 180cm
Main material: Metal
Color: Satin Chrome
Style: Modern
Weight: 4,90kg
Specifications
Dimmable: Yes
Light direction: Uplight & Downlight
Adjustable in height: Not In Height Adjustable
Directional: Tiltable (Vertical)
Cable: Yes, Cable With Plug On Product
Cable length: 250cm
Sensor: Without Sensor
Control: Dimmer – On The Product
Power supply: Adapter/Power Grid
IP-Class: 20
Electric Class: 1
Number of light sources: 1
Lamp socket: Integrated LED
Maximum wattage: 20W
Power requirements: 220-240V~50Hz
Lumen: 1600Lm
Colour temperature: 3000K
Color Rendering Index: 80
Expected lifetime: 15000h
Warranty: 3 Years
TECHNICAL DRAWING & DIMENSIONS
Item number: 19791/24/12
EAN code: 5411212193889
|
---|---
Safety Instructions
Please read this notice carefully and keep it during the lifetime of this product. Follow the instructions for a safe and correct installation and functioning of the light fixture. The manufacturer does not accept any responsibility for damage caused by improper installation and service. Installation should always be done by a qualified electrician. Always isolate the power before commencing installation, maintenance or repair. In case of doubts, please contact a qualified electrician. Please pay attention to locations where the item can be installed (indoor, outdoor, bathroom (for outdoor and bathroom installation, please see further). Indoor items cannot be used in humid places. Do not put the item in contact with water or any liquids or inflammable products. Always respect the minimal distance (indicated on the light) to inflammable products. During installation, make sure that the cables will not be squeezed or damaged by sharp edges. If the external flexible cable is damaged, it needs to be replaced exclusively by the manufacturer, his service agent, or a qualified electrician. This is to avoid all risks. Because the temperature of the item and the bulbs can get very high, they must cool down before being touched. Always use the correct bulb (respect type and maximal wattage as indicated on the product).
Explanation of the symbols that can appear on the fixture
| This item is only suitable for indoor use, exclusive bathroom
(except if a higher IP degree permits that the item can be used in the
bathroom).
---|---
****| Legislation requires that all electrical and electronic equipment must
be collected for reuse and recycling. Electrical and electronic equipment
marked with this symbol indicating separate collection of such equipment must
be returned to a municipal waste collection point.
| Class I: The item has an earth connection. The earth wire (green-yellow)
needs to be connected to the earth connection (marked with this symbol).
| Class II: The item is double insulated and must not be connected to the
earth wire.
| Class III: The item is only suitable for lower voltage supply and must not
be connected to the earth wire.
| IP 20: Protection against contact with a finger
| If the protection glass is damaged or broken, it needs to be replaced
immediately.
| Please respect the minimum distance from the bulb to inflammable objects.
Warranty declaration:
Lucide NV warrants that the products supplied will be free from defects in
material and workmanship for a period of 3 years from the date of purchase by
the end user, if the item is installed and maintained properly as mentioned in
the user manual.
Exclusions for the warranty:
- Broken glass parts of the fixture will only be replaced within 14 days after purchase by the end user.
- Normal wear and tear, and discoloring as a result of normal use.
- Damage is caused by external causes like fire, water, wrong use/ installation or maintenance of the product.
For warranty claims the customer needs to hand over the defective fixture/part and the original purchase ticket.
Further explanations can be found on our website.
www.lucide.com
LUCIDE NV
LUCIDE NV BISSCHOPPENHOFLAAN 145, 2100 DEURNE, BELGIUM
info@lucide.com
tel: +32(0)3 366 22 04
www.lucide.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>