TENS 7000 TO GO DT6070 Back Pain Relief System User Manual

TENS 7000 TO GO DT6070 Back Pain Relief System

Product Information

Specifications

• Model: [Product Model]
• Dimensions: [Product Dimensions]
• Weight: [Product Weight]
• Colour: [Product Color]
• Power Source: [Product Power Source]

Description

The [Product Name] is a versatile and user-friendly device designed to enhance your daily life. It offers a wide range of features and functionalities to meet your needs.

Key Features

• Feature 1: [Description of Feature 1]
• Feature 2: [Description of Feature 2]
• Feature 3: [Description of Feature 3]
• Feature 4: [Description of Feature 4]

Included Accessories

• [Accessory 1]
• [Accessory 2]
• [Accessory 3]

Product Usage Instructions:

Step 1: Unboxing

Start by carefully unboxing the product and removing all protective packaging materials.

Step 2: Power Connection

Connect the product to a power source using the provided power cable. Make sure to use the correct voltage and follow the safety instructions in the user manual.

Step 3: Initial Setup

Turn on the product and follow the on-screen prompts to complete the initial setup process. This may include language selection, Wi-Fi network setup, and account creation.

Step 4: Basic Operation

Once the product is set up, familiarize yourself with the basic operation. This includes navigating the menu, accessing different features, and adjusting settings according to your preferences.

Step 5: Advanced Features

Explore the advanced features of the product to maximize its capabilities. Refer to the user manual for detailed instructions on using specific features and functionalities.

Step 6: Maintenance and Care

To ensure optimal performance and longevity of the product, follow the maintenance and care instructions provided in the user manual. This may include cleaning, storage, and regular software updates.

Frequently Asked Questions (FAQ)

• Q: How do I reset the product to factory settings?
• A: To reset the product to factory settings, navigate to the settings menu and look for the “Reset” or “Restore” option. Follow the on-screen prompts to initiate the reset process.
• Q: Can I use the product without connecting it to a power source?
• A : No, the product requires a power source to function. Ensure it is connected to a compatible power outlet before use.
• Q: How often should I clean the product?
• A : Regular cleaning is recommended to maintain optimal performance. Clean the product at least once a month or as needed, following the instructions provided in the user manual.

Introduction

Thank you for purchasing the TENS 7000 To Go™. The TENS 7000 To Go™ is effective in relieving pain, using TENS treatment which stands for transcutaneous Electrical Nerve Stimulation. TENS is recognized as a safe and highly effective method of relieving pain. Before using, please read all the instructions in this user manual carefully and keep it safe for future reference

EXPLANATION OF TENS

Transcutaneous Electrical Nerve Stimulation (TENS) is a non-invasive, drug- free method of controlling pain. TENS uses tiny electrical impulses sent through the skin to nerves to modify your pain perception. TENS does not cure any physiological problem; it only helps control the pain. TENS does not work for everyone; however, in most patients it is effective in reducing or eliminating the pain, allowing for a return to normal activity

HOW TENS WORKS

The TENS unit sends comfortable impulses through the skin that stimulate the nerve (or nerves) in the treatment area. In many cases, this stimulation will greatly reduce or eliminate the pain sensation the patient feels. Pain relief varies by individual patient. the mode selected for therapy, and the type of pain. In many patients, the reduction or elimination of pain lasts longer than the actual period of stimulation (sometimes as much as three to four times longer). In others, pain is only modified while stimulation occurs

HOW YOUR TENS 7000 To Go””WORKS

The main function of pain relief comes from the continuous stimulation pulse generated by the dual-channel stimulator. We cannot ensure that the pain relief is 100% effective for everyone. However, when used according to our instructions, it can be a safe, non-addictive, noninvasive lower back pain reliever.

CONDITIONS THAT MAY AFFECT YOUR HOW YOUR TENS 7000 To Go”

Since the stimulator is a battery-operated electronic system, its output performance and safety may be affected greatly in extreme humidity. Therefore, it is very important to keep the stimulator dry to ensure the safety and performance of the stimulator

Parts

Your TENS 7000 To Go™ system includes the following parts

Safety Information

Indications for use

The TENS 7000 To Go TM system is intended for temporary relief of pain associated with sore and aching muscles in the lower back due to strain from exercise or normal household and work activities.

Contradictions

Do not use this device if you have a cardiac pacemaker, implanted defibrillator, or other implanted metallic or electronic device. Such use could cause electric shock, burns, electrical interference, or death.

Warnings

• If you are in the care of a physician, consult with your physician before using this device;
• If you have had medical or physical treatment for your pain, consult with your physician before using this device;
• If your pain does not improve or continues for more than five days, stop using the device and consult with your physician;
• Do not apply stimulation over your neck because this could cause severe muscle spasms resulting in the closure of your airway, difficulty in breathing, or adverse effects on heart rhythm or blood pressure.
• Do not apply stimulation across your chest because the introduction of electrical current into the chest may cause rhythm disturbances to your heart, which could be lethal;
• Do not apply stimulation over open wounds or rashes, or over swollen, red, infected, or inflamed areas or skin eruptions (e.g., phlebitis, thrombophlebitis, varicose veins);
• Do not apply stimulation over or in proximity to, cancerous lesions;
• Do not apply stimulation in the presence of electronic monitoring equipment (e.g., cardiac monitors, ECG alarms), which may not operate properly when the electrical stimulation device is in use;
• Do not apply stimulation when in the bath or shower;
• Do not apply stimulation while sleeping;
• Do not apply stimulation while driving, operating machinery, or during any activity in which electrical stimulation can put you at risk of injury;
• Do not use the device on children, it has not been evaluated for pediatric use.
• Consult with your physician before using this device, because the device may cause lethal rhythm disturbances to the heart in susceptible individuals;
• Apply stimulation only to normal, intact, clean, healthy skin

Precautions

• TENS is not effective for pain of central origin, including headache;
• ENS is not a substitute for pain medications and other pain management therapies;
• TENS devices have no curative value;
• TENS is a symptomatic treatment and, as such, suppresses the sensation of pain that would otherwise serve as a protective mechanism;
• For maximum effectiveness, the patient should be under the care of a qualified Pain Management Specialist;
• The long-term effects of electrical stimulation are unknown;
• Since the effects of stimulation of the brain are unknown, stimulation should not be applied across your head, and electrodes should not be placed on opposite sides of your head;
• The safety of electrical stimulation during pregnancy has not been established;
• You may experience skin irritation or hypersensitivity due to the electrical stimulation or electrical conductive medium;
• If you have been suspected or diagnosed with heart disease, you should follow the precautions recommended by your physician; and
• If you have suspected or diagnosed epilepsy, you should follow precautions recommended by your physician.

We also advise users of the following:

• Use caution if you tend to bleed internally, such as following an injury or fracture;
• Consult with your physician prior to using the device after a recent surgical procedure, because stimulation may disrupt the healing process;
• Use caution if stimulation is applied over the menstruating or pregnant uterus; and
• Use caution if stimulation is applied over areas of skin that lack normal sensation.
• Keep this device out of the reach of children; and
• Use this device only with the leads, conductive back brace, and accessories
• recommended by the manufacturer

Adverse Reactions

• You may experience skin irritation and burns beneath the stimulation electrodes applied to your skin;
• You should stop using the device and should consult with your physician if you experience adverse reactions from the device

Specification

Technical information

Pulse Width:

| Adjustable, from 50 to 300 microseconds, 10µs/step
Dimensions:| 1016124.Smm(H*W”T)
Weight:| 150 grams with battery, without belt

Operating Conditions:

| 41F to 104F (5° to 40°0 with relative humidity of 30% – 50%, atmospheric pressure from 700 hpa to 1060 hpa

Storage Conditions:

| 14F to 122F (-10° to 5000 with relative humidity of 10% – 90%,

atmospheric pressure from 700 hpa to 1060 hPa

Program

Burst Mode

| Burst rate: Adjustable, 0-5 – 5Hz Pulse width adjustable, 50~300µs

Freouencvfixed =100 Hz

Normal Mode

| The pulse rate and pulse width are adjustable. It generates continuous stimulation based on the setting value.

Modulation Mode

| Modulation mode is a combination of pulse rate and pulse width modulation. The pulse rate and width are automatically varied in a cycle pattern. The pulse width is decreased by 50% from its original setting in 0.5 seconds, and then the pulse rate is decreased by 50%from its original setting in 0.5 seconds. The total cycle time is 1 second.

In this mode, pulse rate (2-150Hz) and pulse width (50-300µs) are fully adjustable.

5D1 Mode

| The 5D1 (Strength-Duration) mode consists of automatic modulation intensity and pulse width in40% range. The intensity is always increasing while the pulse width is decreasing and vice versa. The intensity is decreased by 40% while the pulse

width is increased by 40% in seconds. In the next 5 seconds, the intensity is

5D1 Mode

| increased by 40% while the pulse width is decreased by 40%.The total cycle time is 10 seconds. Pulse rate (2-1SOHz) and pulse width (SO -300µs) are fully adjustable.

SD2Mode

| The 5D2 (Strength-Duration) mode consists of automatic modulation intensity and pulse width in 70% range. The intensity is always increasing while the pulse width is decreasing and vice versa. The intensity is decreased by 70% while the pulse width is increased by 70% in S seconds. In the next S seconds, the intensity is increased by 70% while the pulse width is decreased by 70%. The total cycle time is

1O seconds. Pulse rate (2-1SOHz) and pulse width (SO -300µs) are fully adjustable

Quick Operation Guide

You may use the following simple operation steps to operate this stimulator.

• Step 1. Insert the 9-Volt battery into your stimulator
• Step 2. Prepare your support belt
• Step 3. Connect the snap cables
• Step 4. Connect lead wires to the device
• Step 5. Adjust the length of the support belt
• Step 6. Apply the conductive spray to the rubber electrodes – two sprays over each electrode
• Step 7. Put on the support belt
• Step 8. Power On/Off Switch and Intensity Controls
• Step 9. Select the therapy mode
• Step 10. Select the simulation time
• Step 11. Set Control
• Step 12. Enjoy the benefits
• Step 14. Turn off the stimulator and remove the back brace

For the details of the operation, please see the following operating instructions.

Operation Instruction

Description of Operation

• Step 1. Insert the 9-Volt battery into your stimulator Make sure both power knobs on the stimulator are turned OFF. To insert the battery, slide the front cover downward until the cover pops off, by pushing on the top with both thumbs. Insert a 9-volt battery according to the diagram in the battery compartment. Close the cover on the stimulator by sliding from the bottom up.
  IMPORTANT: Match the positive terminal of the battery to the positive marking shown.

• Step 2. Connect the snap cables Turn the support belt over, with the electrode facing down. The belt should be lying horizontally in front of you. You will see two metal snaps. Take one female snap wire and snap one connector onto the metal snap as shown in the diagram. Repeat with the other wires

• Step 3. Connect lead wires to the device Before proceeding to this step, be sure the device is completely turned OFF. Holding the insulated portion of the lead wire connector, insert the angled-“L” plug into the receptacle on the top of the main device as shown in the diagram. Ensure the lead wires are inserted correctly with no metal showing

• Step 4. Prepare your support belt Lay your Support Belt open on a flat surface, with the rubber electrode side facing up. You will see two conductive rubber electrode pads. Apply two pumps of conductive spray to each rubber electrode pad before placing the belt around the waist

• Step 5. Adjust the length of the support belt For this support belt, the length of the belt is designed for one size fits all. The belt length can be adjusted using the Velcro patch of neoprene bands, as shown in the diagram

• Step 6. Put on the support belt You may now put on the belt

1. Choose and place the support belt on the intended treatment area as described below.
2. If your lower back pain is closer to your waist level then place the support belt so the middle of the belt rests at your waist
3. If the pain is closer to the lower part of your back, place the support belt so that the middle of the belt rests an inch or two below your waist.
4. Once you have the support belt in position, fasten the elastic band firmly around your torso with the Velcro, pulling both ends of the elastic band

• Step 7. Power On/Off Switch Turn on channel 1 (left knob) for two electrodes or both knobs for 4 electrodes on top of the stimulator until you hear a click and beep. The LCD screen will light up to select therapy mode

• Step 8. Select the therapy mode There are 5 therapy modes: Burst, Normal, Modulation, SD1 and SD2. Select a mode by pressing the •MODE” control. The mode you select will show up on the top of the liquid crystal display (LCD). Continue to press the mode button until you have reached the desired therapy mode.

• Step 9. Select the stimulation time The unit has a timer of 5-60 minutes and is continuous. It can be adjusted by pressing the “Set” button until the time indicator on the bottom right of the LCD screen flashes. Use the[ ] or [ ] controls to adjust the treatment time. The treatment time will countdown automatically in one-minute increments. Its output will shut off when time is up, unless on “Continuous” mode, in “continuous” you will need to manually turn the device off.
  Warning: If you select “Continuous” you should follow the precautions recommended by your physician.

• Step 1 O. Set Control

  • Set Pulse Width Pulse Width is adjustable from 50μs to 300μs. Press the “SET” control to enter this menu, and the width number will flash, use the [ ] or [ ] to adjust the setting.
  • Set Pulse Rate Pulse rate is adjustable from 2Hz to 150 Hz. Press the “SET” control to enter this menu, the rate number will flash, use the[ ] or [ ] to adjust the setting

• Step 11, Intensity Controls Turn the knob on the top of the stimulator to a position where you can feel the stimulation coming from each channel. The strength of stimulation should be comfortable. The strength of stimulation may be adjusted depending on the condition and comfort of the individual user. The stimulation output will increase as the adjustment knob is rotated toward higher output numbers (clockwise).
  1 = Weaker; 8 = Stronger;

• Step 12. Enjoy the benefits After setting the stimulator, you can cover the belt with clothing. Be careful not to unsnap or damage the cables. The stimulator can be clipped to your belt for portable, hands-free lower back pain relief. The stimulator will turn off automatically after the time has expired, unless on continous mode, in which you will need to manually turn the device off. Try the stimulator at different therapy modes to find the amplitude that is the most effective for you. Everyone is different. For some people, the stimulator may begin to feel less effective if it is used for hours in the same therapy mode. This can happen if your body becomes used to the intensity or therapy mode of stimulation

You can prevent this by changing the intensity and/or therapy mode

• Step 13. Turn off the stimulator and remove the back brace
  IMPORTANT REMINDER: When you are finished using your stimulator, turn “OFF” both adjustment knobs (counterclockwise) before removing your support belt to avoid unpleasant stimulation

• Step 14. Low battery indicator A low battery indicator will flash when the battery is almost empty. You should replace the new battery to improve the therapeutic effect.

Maintenance

How to clean your care back pain relief stimulator

Remove the battery from the device every time before cleaning. Clean the device after use with a soft, slighty moistened cloth. In case of more extreme soiling you can moisten the cloth with mild soapy water. Do not use any chemical cleaners or abrasive agents for cleaning. Do not submerge the stimulator in liquids or expose it to any amount of water.

How to clean the lead wires

Disconnect the lead cord and snap cord from the belt and the stimulator. The lead cord and snap cord may be wiped with a damp cloth. Coating them lightly with talcum powder will reduce tangles and prolong their life.

How to clean your support belt

Before washing the belt, remove the snap wires and the stimulator from the belt. Hand-wash your Support Belt in cool water. Do not wash the belt in the washing machine. The support belt should be air-dried, lying flat or hanging. Do not put the belt in clothes dryer. To avoid skin irritation and ensure good contact with your skin, clean silicone rubber electrodes with soap and water frequently. The electrodes must be dried completely before using

How to maintain your TENS 7000 To Go”‘ Pain Relief Stimulator

1. Your stimulator uses a standard 9-volt battery. If stimulation seems to be weak, or the stimulator will not turn on, check the battery. To replace the battery, make sure the device is turned “OFF”. Slide the stimulator cover open by pushing on the back with both thumbs until the cover slides open. Remove the old battery. Insert a 9 Volt battery according to the diagram in the battery compartment. To close the cover, slide from the bottom up.
2. If your support belt is damp after use, allow it to air-dry before re-applying.
3. When connecting and disconnecting a snap wire, hold it by the moulded end and pull. Do not pull on the wire itself. Replace the snap wire if worn or broken.
4. The user must not attempt any repairs to the device or any of its accessories. Please contact your retailer for repair

Troubleshooting

If your device does not seem to be operating correctly, refer to the chart below to determine what may be wrong. Should none of these measures correct the problem, the device should be serviced.

place. Change the battery if necessary.
Displays fail to light up| a)  Try fresh batteries.

b)  Ensure batteries are inserted correctly. Check the following contacts:

•  All contacts are in place.

•  All contacts are not broken.

The stimulator is on, but there is no stimulation.| a)  Check the Lead wire and snap wire for breakage. If broken, replace.

b) Make sure the Lead wire and snap wire are securely snapped onto the support belt and into the stimulator socket.

The stimulator has a 9-volt

battery, but will not turn on.

| Please consult or return the device to your dealer.

Storage

1. For a prolonged pause in treatment, store the device in a dry room and protect it against heat, sunshine and moisture.
2. Store the device in a cool, well-ventilated place.
3. Never place any heavy objects on the device. If the stimulator will not be used for more than a week, remove the battery from the stimulator.

Disposal

Dead batteries must be disposed of in a specially labelled collection container, at toxic waste collection points or through an electrical retailer. You are under legal obligation to dispose of batteries correctly. Please dispose of the device per the legal obligation. Electrical devices are recyclable materials and should not be disposed of with household waste after their useful life. Help us protect our environment and save resources by disposing of the device and batteries at appropriate collection centres. Contact the organization which is responsible for waste disposal in your area if you have any questions.

Explanation of Symbols

• Type BF applied part
• Disposal by Directive 2002/96/EC (WEEE)
• The name and the address of the manufacturer
• Complies with the European Medical Device Directive (93/42/EEO and amended by directive 2007 /47 /EC requirements. Notified body TUV Rheinland (019n
• Refer to the Instruction Manual.

Warranty

Please contact your dealer or the device centre in case of a claim under the warranty. If you have to send in the device, enclose a copy of your receipt and state what the defect is. The following warranty terms apply:

1. The warranty period for the device is one year from the date of purchase. In case of a warranty claim, the date of purchase has to be proven using the sales receipt or invoice.
2. Defects in material or workmanship will be removed free of charge within the warranty period.
3. The warranty applies to the stimulator and necessary parts and labour relating thereto. The distributor reserves the right to replace or repair the unit at their discretion.
4. The warranty does not apply to belts, lead wires, batteries and stimulators if damage resulting from failure to follow the operating instructions, accidents, abuse, alterations or disassembly by unauthorized individuals.
5. Repairs under warranty do not extend the warranty period for the unit or for the replacement parts.
6. Liability for direct or indirect consequential losses caused by the unit is excluded even if the damage to the unit is accepted as a warranty claim.

Replacement Parts

Please contact your dealer or the device centre to order replacement parts

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>