Pyle PDWR58AB 5.25” Pro Active Wall Mountable Speakers Product – user manual
- June 4, 2024
- Pyle
Table of Contents
Pyle PDWR58AB 5.25” Pro Active Wall Mountable Speakers Product
SPECIFICATION
- BRAND Pyle
- MODEL NAME PDWR58AB
- SPEAKER TYPE Component
- CONNECTIVITY TECHNOLOGY RCA, Auxiliary
- SPECIAL FEATURE Manual
- PRODUCT DIMENSIONS 2 x 6.5 x 9.6 inches
- ITEM WEIGHT 92 pounds
- MANUFACTURER Sound Around
- IMPEDANCE 8ohm
WHAT’S IN THE BOX
DIMENSION
PRODUCT ILLUSTRATION
HOW TO INSTALL
- Connect the wires to the speakers.
- Secure the speaker to the wall. Most in-wall speakers use dog-leg clamps to secure the speaker to the wall. After inserting the speaker in the cut-out, tighten the screws on the front of the speaker.
PRODUCT DESCRIPTION
Versatile Wall Mount Speakers – Hassle-Free to Set-Up and Mount – Includes (2) Speakers (Active + Passive) – 2-Way Full Range Stereo Sound Reproduction – Impressive Bass Response – Built-in Digital Sound Amplifier – Convenient Volume Control – Custom Design for High Power and Deep Bass Response – Used for Audio Monitor and Surround Sound Applications – Quick Connect Screw-Type Speaker Terminals – Adjustable Angle Wall Mount Brackets – Rugged & Heavy Duty Cabinet Enclosure – Rear Panel Audio Settings Control Center – Connect & Stream Audio from External Devices – Aux (3.5mm) Input Jack (Loop + Sub) – RCA (L/R) Audio Connector Jacks – Screw Terminal Block Speaker Connectors (Active Speaker) – Rotary Volume, Bass, Treble Adjustment – Power LED Indicator Light – Unique Standby/Auto Power On with Audio Signal Input – Removable & Rust Proof Steel Speaker Grills – Daisy-Chain Ability ( Active to Passive Speaker) Stereo System – Recommended for Indoor Use Only – Used for Home, Garage, Enclosed Patio, and Porch Deck Applications What’s in the Box: – (1) Active Wall Speaker – (1) Passive Wall Speaker – Power Cable Technical Specs: – Power Supply: 600W (MAX Power) – RMS Power: 300W – Speaker Size: Sound System: 5.25” Subwoofers: 0.5” Tweeter – Subwoofer Type: 5.25” PP Polymer – Tweeter Type: 0.5” Mylar Dome – Frequency Response: 70-16 kHz (+/-3dB) – Speaker Impedance: 8 Ohm – Audio Sensitivity: 86dB – Construction Material: Polypropylene – Power Cable Length: 3.94 ft. – Power Output: 120-240V – Single Speaker Dimensions (L x W x H): 7.2” x 6.5” x 9.6” –inches
FEATURES
- 600 WATT POWER: This wall mount high powered 2 way full range audio projection loudspeaker system has a max power output of 600 watt with built-in digital sound amplifier allowing you to play your favorite tracks as loud as you want and with style
- 25” SUBWOOFER 0.5” TWEETER: These mounted indoor stereo speakers active + passive sound system indoor speakers have 5.25” polymer subwoofers and high performance 0.5” mylar dome tweeters for surround sound and impressive bass response
- DURABLE AND EASY TO SET UP: Made with engineered polypropylene, this wall mountable speaker set is sure to prove its longevity for long-term use. It is also features quick connect screw-type terminals for convenience in setting it up
- 5MM AUX + RCA CONNECTORS: This proactive wall-mountable speaker system features 3.5mm AUX input connector jack (loop + sub) and RCA audio connector jacks so you can connect additional external devices to your speaker system
- REAR CONTROL CENTER: This mountable speaker set features rear panel controls w/ rotary volume, bass & treble adjustments. Additional features include adjustable bracket angle, unique standby/auto power on w/ audio signal input, daisy chain ability.
Warranty & Support
If you’d like a copy of the manufacturer’s warranty for a product found on Amazon.com, you can contact the manufacturer directly or visit their website for more information. Manufacturer’s warranties may not apply in all cases, depending on factors like the use of the product, where the product was purchased, or who you purchased the product from. Please review the warranty carefully, and contact the manufacturer if you have any questions.
FAQs
How high should Pyle PDWR58AB in wall speakers be mounted?****
Although many in-wall speakers come with rotating tweeters that can help make up for installations high on the wall, you’ll get the greatest sound if you position the speakers at the same height as a freestanding speaker, which is roughly 2 feet above ear level.
Where should I Pyle PDWR58AB mount my wall speakers?****
The simplest choice is frequently wall hanging. It’s crucial that the speakers are positioned at ear level and equally spaced on both sides of the TV. A minimum of one metre should also be left between the speakers and any side walls.
Do Pyle PDWR58AB wall mounted speakers sound good?****
Numerous in-wall speakers produce superb sound. The only thing you give up with a stereo configuration is that the sound quality might not be nearly as high if you install them properly and use a good speaker.
Should I Pyle PDWR58AB mount my speakers on the wall?****
A center-channel speaker is sometimes a good candidate for a wall mount. If the centre is to be housed in a cabinet, be sure to position it as near as you can to the edge of the cabinet. Any exposed shelf in front of the speaker will cause the sound to reflect off of it and bounce back, degrading the sound quality.
Can you Pyle PDWR58AB mount speakers to a TV?****
Your TV might feature a headphone out port if it doesn’t use RCA connectors for audio output (3.5mm port). This can be used to link your TV to your speakers. They share the same connector that is used for computers, tablets, and smartphones. Use an RCA jack on the speaker end and a 3.5mm audio jack on the TV end for this.
Do Pyle PDWR58AB speakers support Bluetooth?****
You can listen to music anywhere you go with the Pyle Tube BoomBox Speaker! All of today’s cutting-edge technology, including smartphones, tablets, and laptops, can easily connect and stream music using Bluetooth.
How should my Pyle PDWR58AB ceiling speaker be connected?****
Bluetooth connection Connect the active speaker to a power source with the power adapter that is included. If the connection is successful, the active speaker will glow red. Select the ‘PyleUSA’ Bluetooth connection name after turning on Bluetooth on your phone or tablet.
Does Pyle PDWR58AB speakers’ waterproof claim hold water?****
These waterproof indoor/outdoor Pyle speakers are ideal for use on boats, patios, decks, around pools, and anywhere else outdoors. They are completely waterproof because to the sturdy ABS structure. With a 500 watt maximum output, they are also powerful.
What’s wrong with my Pyle PDWR58AB speaker?****
Check to see if YOUR gadget has Bluetooth enabled. 5. For instructions on how to carry out the pairing procedure once more, see “Pairing the Speaker with a Bluetooth Enabled Device”. The Bluetooth Speaker and my Bluetooth device are not able to pair.
Do Pyle PDWR58AB speakers work with Alexa?****
This is the best option if you want to affordably add power and Alexa to your garage or backyard. Thanks to the Pyle Bluetooth Amplifier, you can now use your Alexa Dot outside! A wonderful system!
Does Pyle PDWR58AB have good public speaking skills?****
Excellent sound quality, particularly given the cost! I have two because my two kids adore the way they sound! This portable Bluetooth speaker has outstanding sound quality and is very affordable.
How do I connect my Bluetooth device to my Pyle PDWR58AB AMP?****
Wait for the device to connect with the Wireless BT name “Pyle Speaker.” E. Once paired, your Bluetooth device can start playing music. The unit’s control buttons can also be used to choose songs from your Bluetooth device.
Can my TV and Pyle PDWR58AB Bluetooth speakers be paired?****
Select Bluetooth under Network Settings on your television. Next, look for your speaker in the list of discoverable devices. If you were fortunate, this simple linking technique might have been successful.
Why does Bluetooth pairing on Pyle PDWR58AB fail?****
Both of the devices you’re trying to connect have to be charged. Some gadgets’ smart power management may turn off Bluetooth if the battery level is too low. If your phone or tablet won’t pair with the device you’re trying to pair it with, check to see if both of them have enough battery life.
How do I get Alexa to function with my Pyle PDWR58AB receiver?****
To configure Alexa, use the Alexa app. Go to your Alexa device in the Alexa app and choose Bluetooth. Ensure that Bluetooth scanning is activated on your receiver. After you’ve configured it, just say “Connect Bluetooth,” and Echo will pair with the most recent Bluetooth device you used.