2A3EJAIR Deeper Connect Air User Guide

2A3EJAIR Deeper Connect Air

Product Information

Specifications

• Working Mode: Wireless Relay Mode
• Interface: USB Type-C Charger port
• Indicator Light: Solid blue when connected
• Antenna: Yes

Product Usage Instructions

Step 1: Power On

1. Connect the Deeper Connect Air to a power source using the USB Type-C port.
2. Wait for the indicator light to change from blue blinking to red blinking, indicating it is ready to connect.

Step 2: Connect to Deeper Connect Air

1. On your device, go to Wi-Fi settings and connect to the network named “DeeperWiFi-xxxx”.
2. Enter the password “ilovedeeper” when prompted.

Step 3: Log into AtomOS

1. Open a web browser and type “34.34.34.34” in the address bar.
2. Enter “admin” as the username and password to log in (you can change the password later).

Step 4: Setup Wireless WAN

1. In the AtomOS dashboard, go to the Wireless WAN setting.
2. Click on the “Scan Wi-Fi” button to detect available networks.
3. Select a local network from the list and enter the Wi-Fi password in the pop-up window.
4. Wait for the connection to be established (may take up to 60 seconds).

When the indicator light is solid blue, it means the network is connected. Enjoy your Deeper Connect Air!

Frequently Asked Questions

Q: What is the working mode of the Deeper Connect Air?

A: The working mode of the Deeper Connect Air is Wireless Relay Mode.

Q: How do I connect my device to the Deeper Connect Air?

A: Connect to the Wi-Fi network named “DeeperWiFi-xxxx” and enter the password “ilovedeeper” when prompted.

Q: How do I access the AtomOS dashboard?

A: Open a web browser and type “34.34.34.34” in the address bar. Enter “admin” as the username and password to log in.

Q: How do I set up the Wireless WAN?

A: In the AtomOS dashboard, go to the Wireless WAN setting and click on the “Scan Wi-Fi” button to detect available networks. Select a local network from the list and enter the Wi-Fi password in the pop-up window. Wait for the connection to be established.

Interface Introduction

1. Indicator Light
2. USB Type-C Charger Port
3. Antenna
4. Reset Button

How it works

Wireless Relay Mode

1. Ensure there’s a stable network connection
2. Plug in the device and turn it on (Please power the device using a USB 3.0 interface)
3. Connect to the device’s Wi-Fi after the indicator light starts blinking red
4. Enter the AtomOS dashboard and connect to an available local Wi-Fi

Step-by-step setup

1. Power on the Deeper Connect Air by plugging in the Type-C port to a power source. (Please power the device using a USB 3.0 interface) Indicator light changes from blue blinking to red blinking, indicating it is ready to connect.
2. Connect to the Wi-Fi network: “DeeperWiFi- xxxx” Enter the password: “ilovedeeper” to connect your device to the Deeper Connect Air.

3. Log into AtomOS by typing “34.34.34.34” in your internet browser then enter the default username: “admin” and password: “admin” to log in. (You can change the password once logged in.) Next, go to the “Wi-Fi” tab for WAN and LAN setup.

4. Connect the Deeper Connect Air using the “scan Wi-Fi” button under the wireless WAN setting. Select a local network to connect to and enter the Wi-Fi password in the pop-up window. Connection may take up to60 seconds.

5. To reset the Wi-Fi adapter’s SSID and password, enter new Wi-Fi SSID in the Wireless LAN setting and click “save”. Reboot  after successfully changing the Wi-Fi SSID.When the indicator light is solid blue, it means the network is connected. Enjoy your Deeper Connect Air!

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
   This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

ISED Statement

• This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) Thisdevice may not cause interference, a nd (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).

• This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.

• This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
  This equipment should be installed and operated with minimum distance 0cm between the radiator & your body.

• The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co- channel mobile satellite systems.

• This radio transmitter has been approved by Industry Canada to operate with the antenna types listed with the maximum permissible gain indicated. Antenna types not included in this list, having again greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>