OLIGHT Arkfeld Pro Three Light Sources Portable EDC Flashlight User Manual

OLIGHT Arkfeld Pro Three Light Sources Portable EDC Flashlight User Manual

IN THE BOX

Arkfeld Pro

MCC

Table 1:

Flashlight

COOL WHITE CC T: 5700~6700 K C R I : 70
NEUTRAL WHITE CC T: 4000~5000 K CR I: 70

2,536cd

|
96m|

IPX6

---|---|---

1m

|
96g/3.39oz

(L)120(W)27(H)16mm (L)4.72(W)1.06(H)0.63in|

Lithium Polymer Battery 5.55Wh (1500mAh 3.7V)

Working temperature: 0-45°C

|
Optical Power (Typ. ): 900mW Max Runtime: 3h15min Wavelength
(Typ.): 365~370nm

Max Output: 5mW (Class 3R) Max Runtime: 70h Wavelength: 510~530nm|

Max Output: 0.39mW (Class1) Max Runtime: 174h Wavelength: 510~530nm

Above data are tested per ANSI/NEMA FL 1-2009 standard in Olight’s labs for reference.
Table 2:
MCC

Figure 1
Lock/Unlock

Press and hold

Figure 2
Charging

Figure 3
Selector—Switch Mode:

1. UV Light
   Rotate the selector counterclockwise

2. Laser

3. White Light
   Rotate the selector clockwise

Configuration change

OPERATE IN WHITE LIGHT MODE

Figure 4
**ON/OFF

** Press

**Figure 5
Moonlight

**Press and hold

Figure 6
Turbo

Double press

Figure 7
Change Brightness Level

Press and hold

Figure 8
Strobe

Triple press

Figure 9
Timed shutdown

Double press and hold
Blink once : 3 min
Blink twice : 9 min

OPERATE IN LASER MODE

Figure 10
ON/ OFF

Press

Figure 11
Turn on the white light while the laser on

Double press

OFF(white light)                               ON(High)
Figure 12
Turn off the white light while the laser on

Double press

ON (white light)                                    OFF
Figure 13
When the laser and white light are turned on at the same time, change the brightness of the white light

Press and hold

OPERATE IN UV MODE

Figure 14
ON/ OFF

Press

Figure 15
Battery Level Indicator Display

• One red indicator (＜10%)

HOW TO OPERATE

1. Please refer to Table 1 and Table 2 for product parameters;

2. lock/unlock, see Figure 1;
   When the light is off, press and hold the button (about 2 seconds) until you see moonlight mode, the laser (Laser mode), or UV light (UV mode) turn on and then quickly off, the flashlight has then been locked out. When the light is locked, press and hold the button (about 1 second) until the flashlight activates moonlight mode, the laser, or UV light, the flashlight will then be unlocked.

3. Charging, see Figure 2;

4. The selector switch mode, see Figure 3;
   Rotate the selector clockwise to select white light mode; rotate the selector counterclockwise to switch to UV mode; stop in the middle to switch to laser mode.

5. In the white light mode, the center button operation guide:

6. Turn on/off the flashlight, see Figure 4;
   Single press the button to turn on and off.

7. Moonlight, see Figure 5;
   Press and hold for 1s when the light is off, the light will enter moonlight mode.
   TURBO, see Figure 6;
   Quickly double press the button to enter Turbo.

8. Change brightness level, see Figure 7;
   While the flashlight is on, press and hold the button to cycle through the brightness levels. The order of brightness is low, medium, then high.

9. Strobe, see Figure 8;
   In the white light mode, press the button three times or more continuously to enter the Strobe mode.

10. Timed shutdown, see Figure 9;
    When the light is on, double press and hold the switch to access the timer settings. A single blink accesses the short timer while two blinks accesses the long timer. The light will automatically turn off when the timer runs its course.

11. Instructions for center button operation in laser mode:

12. Turn on/off the laser, see Figure 10； Single press the button to turn on and off;

13. When the laser is on, turn on the high brightness white light, see Figure 11;

14.  With the laser on, double press the center button toactivate white light high level.

15. When the laser is on, turn off the white light,see Figure 12;
    When the laser and white light are on at the same time, double press to turn off the white light, the laser will continue to illuminate;

16. When the laser and white light are turned on at the same time, change the brightness of the white light, see Figure 13;
    When the laser and white light are on at the same time, press and hold the button to cycle through the brightness levels. The order of brightness is low, medium, then high.

17. In UV mode, turn on/off the flashlight, see Figure 14;
    Single press the button to turn on or off the UV light;

18. Battery level indicator display, see Figure 15;

WARNING

• Do not look directly at the light source or shine to eyes, may cause temporary blindness or permanent damage to the eyes.
• Laser radiation: Avoid looking directly at 3R laser products with the naked eye (only for products containing this light source).
• Ultraviolet light: Do not look directly at the lightsource with the naked eye (only for products containing this light source).
• Do not block the light at close range, or else the energy emitted from the light may cause the object to burn.
• Don’t store, charge or use this light in a carwhere inside of temperature may be over 60°C, or similar places.
• Do not remove the battery or replace it yourself.
• Do not take out the proprietary battery for charging.
• Do not short the charging port with metallic object intentionally

NOTICE

• Do not put a hot light into any type of fabric bag or fusible plastic container.
• Do not activate the maximum brightness mode multiple times continuously to prevent the high temperature on the surface.
• When the product gets hot, please change it to low brightness, or turn it off temporarily.
• Active thermal management: The built-in thermister monitors the temperature of the light in real time and suppresses overheating by reducing the output.
• Before long term storage, please fully charge the product.
• Do not use the product while charging.
• Keep the charging port clean and dry.
• Do not put it in the mouth or lick it, or else leakage of the charging port may cause discomfort.
• When the remaining battery power is sufficient (4 or more power indicators), the brightness can reach the highest level.
• It is normal that the light flickers when the battery is close to running out.
• Operating time in Turbo or high mode varies with ambient temperature and heat dissipation conditions. The better heat dissipation, the longer runtime.
• Do not disassemble the product.
• The switch is magnetically sensitive. Its function may be affected nearby the strong magnets.
• Do not immerse the flashlight in seawater or other corrosive media as it will damage the product.

EXCLUSION CLAUSE

Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual, including but not limited to using the product inconsistent with the recommended lockout mode.

WARRANTY

Within 30 days of purchase: Contact the original seller for repair or replacement.
Within 2 years of purchase: Contact Olight for repair or replacement.
MCC: One year.
This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents, improper maintenance, or repair by anyone other than an Authorized retailer or O light itself.

USA Customer Support

cs@olightstore.com
Global Customer Support
contact@olightworld.com
Visit : www.olightworld.com to see our complete product line of portable illumination tools.
Dongguan Olight E-Commerce Technology Co., Ltd.
4th Floor, Building 4, Kegu Industrial Park, No 6
Zhongnan Road, Changan Town, Dongguan City,
Guangdong, China.
Made in China

References

• Olight | Illuminate Your World.
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>