HPRT CP4100 4×6 Photo Printers User Guide

CP4100 4×6 Photo Printers
User Guide

Product Introduction

Accessories

Note The printer equipped with a ribbon and2 package of photo paper that can print about 20pcs for testing

Power On

1. Connect power supply
   Plug one end of the power cord into the printer’s power interface, and then plug the adapter into a power outlet.

2. Power on
   Hold down the power button for 3 seconds to tum on the printer

Ribbon Cassette Loading

1. Open the ribbon cassette compartment cover

2. Isert the ribbon cassette
   Tale out the ribbon cassette from the accessories box and insert it into the nibbon compartment in the direction of the arrow marked on the cassette, and hear aclick” to indicate that it’s in place.

3. Close the ribbon cassette campartment cover

Photo Paper Loading

1. Open the paper cassette
   Gently lift up and remove the paper cassette above the printer. Pull out part. and flip it down, and then lift part2 cover upward
   

2. Load photo paper
   Tale out the photo paper from the accessories box and load it in the paper cassette with glossy side facing up

3. Close the part 2 cover

Note: Recommended not to put more than I8sheets of paper at a time. Do not touch the glossy side to ensure the print effect, except for the non- printable area.

Paper Cassette Loading

1. Open thepaper inlet cover

2. Load the paper cassette into the printer in the direction shown below

3. Load the paper cassette into place
   The paper cassette slides about2 cm into the slot, and hear a dick” to indicate that it’sin place

Ribbon Cassette Replacing

1. Open the ribbon cassette compartment cover

2. Flip the red button up and the ribbon cassette will pop up automatically. Remove this old ribbon

3. Load the new ribbon cassette into place until hear a dick” sound, and then close the compartment cover.

Tips
All the drawings of product and accessories in the manual are for reference only. Due to the updating and upgrading of the product, there maybe some differences between the actual product and the drawings, please refer to the actual  product. For more product information, please contact PRT customer service

CP4100 Photo Printer

Product Name: Photo Printer
Product Model 9.4TS234
Input: 24, 2A
WiConnection W-Fi IEEE 802.Lb/g/n2.4 GHz
Dimensions. 20013075 mm
Weight. About L0 kg(without accessories)
Operating Temperature 5€-35€
Manufacturer Xiamen Harin Electronic Technology Co.Ltd
Add: No.96, Rongyuan Road, Tong’ an District, Xiamen, China 361100
Web www.hprtcomn
Email. support@hprt.com

Power Button Operation

• Turn on the printer hold down the power button ior 3 seconds, then the white power indicator is on,
• Turn off the printer hold down the power button for 3 seconds, then the power indicator will be off,
• Reset printer network in the tumed on state, hold down the power button for 6 seconds, and then the white connection indicator will flash quickly. Release the button_,the pninter network now has been reset

LED Indicator Definitions

Power Indicator|
---|---
Off| Power off
White light| On| Power on
Flash quickly
Powering on|
Printing
Flash slowly| Firmware update
Connection Indicator|
Off| Connect failed/Not connected
White light| Flash quickly| Powering on
Resetting network
Flash slowly| Configurating network
On| STA mode connect successfully
AP mode connect successfully
Error Indicator|
Off| Normal
White light| Flash quickly| Powering on
Red light| Flash quickly| Paper jam
Out of ribbon/Ribbon cassette abnormal
Flash slowly| Out of paper/Paper cassette abnormal
Print head temperature is too high

Printing from Mobile Phone

AP Download
Scan the QR code to download the App

https://hereprint.hprt.com/app/heyphoto

Connect to printer in AP mode

1. Open APP, dick Add device and Connect” ith (P4 100-00OX” 0000X are last lour digits of Bletooth address)
2. Click Connect to printer directly” loll ow the prompts on the APP to join and connect to the Wif released by the printer

Operating Environment

1. Please place the printer on a desktop or other flat and stable surface for use,
2. When printing, the photo paper will move back and forth. Please ensure that there is more than IO cm space behind the printer

Precautions

1. The best operating temperature is 5C-35C, if the environmental temperature is too high, the print quality may be affected,
2. Please use official adaptor, ribbon and photo paper to ensure the print quality,
3. Do not touch the film of ribbon and the glossy side of photo paper in case of polluting them, this may affect the print quality,
4. Do not pull out the photo paper by force during printing, this may damage the printer,
5.  When not in use for a long time, please remove the paper cassette and close the covers of it and the printer to keep things like dust out,
6. Operating this device may cause radio interference in a residential environment.

FCC WARNING
This device complies with part I5of the FCC Rules. Operation is subject to the following two conditions () this device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment NOTE. This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part I5 of the CC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radio frequency  energy and,if not installed and used in accordance with the instructions, may cause harmful interference to radio communications
However, there is no guarantee that interference will not occur in a particular installation this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a Circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/ TW technician for help. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator  your body. Use only the supplied antenna
  FCC ID: 2UTE-4TS.234

CP4100

Documents / Resources

| HPRT CP4100 4x6 Photo Printers [pdf] User Guide
CP4100 4x6 Photo Printers, CP4100, 4x6 Photo Printers, Photo Printers
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>