U-LINE U-2224DWRINT-00A Refrigerator Drawers User Guide

U-LINE U-2224DWRINT-00A Refrigerator Drawers

Product Information

The U-2224DWRINT-00A is a high-quality drawer unit designed and manufactured by U-Line Corporation. It is an integrated panel drawer unit that seamlessly integrates with surrounding cabinetry, providing a built-in appearance. The unit is designed for residential and commercial use and offers reliable performance and durability.

Specifications

• Model: U-2224DWRINT-00A
• Manufacturer: U-Line Corporation
• Dimensions (Standard Panel): 23-1/2″ (595 mm) x 14-15/16″ (379 mm) x 3/4″ (20 mm)
• Maximum Weight Capacity for Drawer Panel: 20 lbs (10 kg)

Installation

Integrated Panel Dimensions
The integrated panel dimensions are as follows:

• Width: 23-1/2″ (595 mm)
• Height: 14-15/16″ (379 mm)
• Thickness: 3/4″ (20 mm)

Panel Preparation
To achieve a seamless integration with surrounding cabinetry, follow these steps:

1. Cut the panels to the dimensions listed in the diagram below.
2. Optional: Stain or finish the panel to the desired color following the manufacturer’s instructions.
3. Optional: Install handles and hardware.

IMPORTANT:

• The back surface of the panel must have ample flat surface to mount the overlay panel flat and without interference.
• Each drawer panel must not weigh more than 20 lbs (10 kg).
• Ensure all drilled holes are drilled to the correct depth to avoid splits in the wood when installing hardware.

Handleless Integrated Drawer Panels
For a handleless integrated panel, follow the procedure below:

1. Prepare two panels for your drawer unit.

FAQ

• Q: Where can I find additional information on my product?
  A: User Guides, Spec Sheets, CAD Drawings, Compliance Documentation, and Product Warranty information are all available for reference and download at u-line.com.

• Q: What should I do if I suspect property damage or personal injury related to a U-Line product?
  A: In the unlikely event of property damage or personal injury, please take the following steps:

  • Contact U-Line Customer Care immediately at +1.414.354.0300.
  • Do not perform any service or repairs on the unit without prior written approval from U-Line.
  • If the unit has been altered or repaired in the field without prior written approval from U-Line, claims will not be eligible.

• Q: How can I contact U-Line for general inquiries?
  A: You can contact U-Line Corporation at:

  • Address: 8900 N. 55th Street Milwaukee, Wisconsin 53223 USA
  • Operating Hours: Monday – Friday 8:00 am to 4:30 pm CST
  • Phone: +1.414.354.0300
  • Email: sales@u-line.com

• Q: How can I get service and parts assistance?
  A: For service and parts assistance, you can contact U-Line during their operating hours:

  • Operating Hours: Monday – Friday 8:00 am to 4:30 pm CST
  • Service Phone: +1.800.779.2547
  • Service Email: onlineservice@u-line.com
  • Parts Email: onlineparts@u-line.com

USER GUIDE & SERVICE MANUAL

• Model : U-2224DWRINT-00A
• Click on any section below to jump directly there

USER GUIDE

WELCOME TO U-LINE

• Congratulations on your U-Line purchase. Your product comes from a company with over five decades of premium modular ice making, refrigeration, and wine preservation experience. U-Line creates products focused on functionality, style, and inspired innovations — paying close attention to even the smallest details.
• Applications include residential, outdoor, ADA height compliant, marine, and commercial. Complete product categories include Beverage Centers, Wine Refrigerators, Ice Machines, Refrigerators, Freezers, and Dispensers.
• Our advanced refrigeration systems, large and flexible capacities, and Built-In to Stand Out® clean integrated look allow you to preserve the right product, in the right place, at the right temperature. Since 2014, U-Line has been part of the Middleby family of brands. All products are designed, engineered, and assembled in Milwaukee, Wisconsin, USA, and select products are available worldwide. U-Line – RIGHT PRODUCT. RIGHT PLACE. RIGHT TEMPERATURE®.

PRODUCT INFORMATION

Looking for additional information on your product? User Guides, Spec Sheets, CAD Drawings, Compliance Documentation, and Product Warranty information are all available for reference and download at u-line.com .

PROPERTY DAMAGE / INJURY CONCERNS
In the unlikely event property damage or personal injury is suspected related to a U-Line product, please take the following steps:

1. U-Line Customer Care must be contacted immediately at +1.414.354.0300.
2. Service or repairs performed on the unit without prior written approval from U-Line is not permitted. If the unit has been altered or repaired in the field without prior written approval from U-Line, claims will not be eligible.

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

Integrated Panel Dimensions

Metric measurements rounded and optimized.

STANDARD PANELS

NOTICE
Due to differences in surrounding cabinetry, the panel may not perfectly align with drawer. The procedure below is designed to provide a finished integrated panel that seamlessly integrates with surrounding cabinetry.

Panel Preparation
A full integrated drawer panel completely covers the drawer and provides a built-in appearance.
Two panels are required per unit. Dimensions for both panels are the same for standard integrated panels and handleless integrated panels.

NOTICE
Each drawer panel must not weigh more than 20 lbs (10 kg).
It is important to ensure that all drilled holes are drilled to the correct depth in order to avoid splits in the wood when hardware is installed.

1. Cut the panels to the dimensions listed in the diagram below.
2. Optional: Stain or finish panel to desired stain or color. Be sure to closely follow the instructions provided by the manufacturer.
3. Optional: Install handles and hardware.

NOTICE
When applying an integrated panel to a unit, ensure that both sides are finished in order to prevent warping.

Standard Panel Dimensions

NOTE:
Panels may be deeper than 3/4″ provided the weight of the panel does not exceed 20 pounds.

HANDLELESS INTEGRATED DRAWER PANELS

• The following procedure is designed to provide a finished, handleless solid panel for a 24″ (600 mm) drawer that seamlessly integrates with its surrounding cabinetry. Prepare two panels for your drawer unit.
• NOTE : Many cabinet manufacturers provide a ready solution for a handleless, integrated design that can be easily applied to your U-Line 3000 Series model.
• Consult your cabinet manufacturer for applicable design and installation details. The cabinet manufacturer’s solution to this design and integration detail will often result in an integrated panel solution wherein the size of the panel may result in a height dimension taller than what we specify. This can be achieved provided the additional height is positioned above the appliance drawer.

NOTICE

• The integrated panel aligns with the surrounding cabinetry and, due to differences in cabinetry, may not align perfectly with the drawer.
• The appliance will need up to 34-1/2″ (876 mm) to the underside of the counter to leave room for leveling adjustments.
• Each drawer panel with insert must not weigh more than 20 lbs (10 kg).

Integrated Panel Preparation

1. Cut the main panel to the dimensions below. For details, see the drawings on the next page.

2. Main panel width 23-1/2″ (595 mm)

3. Main panel height 13-13/16″ (351 mm)

4. Create the top design for the handleless feature and the 1/8″ notch for the insert(s) indicated on the Top Detail drawing.

5. Prepare the insert(s) that will back up the handleless design. Wooden Insert – Cut 1/8″ thick wooden insert(s) to the dimensions below.

6. Wooden insert width 23-1/2″ (595 mm)

7. Wooden insert height 3-1/2″ (89 mm)

8. Optional : Stain or finish panel and wooden insert to desired stain or color. Be sure to closely follow the instructions provided by the manufacturer.
   NOTICE If finishing panel or wooden insert, all sides must be finished to prevent warping.

9. Attach the insert to the panel. Wood glue or equivalent adhesive should be used to attach insert to panel.

Handleless Integrated Panel Dimensions

Wooden Insert Dimensions

EXTENDED INTEGRATED PANELS

NOTICE
Due to differences in surrounding cabinetry the panel may not perfectly align with drawer. The procedure below is designed to provide a finished panel that seamlessly integrates with surrounding cabinetry.

Panel Preparation
An extended integrated panel can be used to maintain alignment with an adjacent extended cabinet height or a reduced toe-kick/grille application.

1. Cut the panels to the dimensions listed in the appropriate diagram on the next page.
2. Optional: Stain or finish panel to desired stain or color. Be sure to closely follow the instructions provided by the manufacturer.
3. Optional: Install handles and hardware.

NOTICE

• Each drawer panel must not weigh more than 20 lbs (10 kg).
• It is important to ensure that all drilled holes are drilled to the correct depth in order to avoid splits in the wood when hardware is installed.
• Appliance will need up to 34-1/2″ (876 mm) to the underside of the counter to leave room for leveling adjustments.
• When applying an integrated panel to a unit, ensure that both sides are finished in order to prevent warping.

• • Panel can extend beyond the drawer.
• ** A minimum of 1″ (25 mm) from  the floor is required for proper ventilation.

Extended Integrated Panel Dimensions

Top Drawer

Bottom Drawer * A minimum of 1″ (25 mm) is required from the floor to the bottom of the extended integrated panel/frame for proper ventilation.

NOTE:
Panels may be deeper than 3/4″ provided the weight of the panel does not exceed 20 pounds.

Integrated Grille – Plinth Dimensions

PREPARE AND INSTALL INTEGRATED GRILLE (PLINTH STRIP/BASE FASCIA)

1. Use the dimensions provided in the diagram to cut and shape your integrated grille (plinth strip/base fascia) panel. Recommended panel thickness is between 1/4″ (6 mm) and 3/8″ (9 mm).
2. Finish or stain your grille (plinth strip/base fascia) panel to match your surrounding furniture. Finish front, back and edges to prevent warping. Carefully follow the manufacturer’s recommendations for finish application and cure times.
3. Apply double sided tape to the backside of the integrated grill (plinth strip/base fascia). Use the diagram below for reference. U-Line recommends 3M™ VHB™ tape, a high strength bonding tape.
4. Remove backing paper from double sided tape.
5. Carefully align grille (plinth strip/base fascia) over integrated panel and press into position.

INTEGRATED GRILLE (PLINTH STRIP/BASE FASCIA) DIMENSIONS

Integrated Panel Installation

1. Fully open drawer.

2. Align top of panel with top edge of drawer. Center panel on drawer.
   NOTICE Due to differences in floor construction or surrounding cabinetry, the panel may not sit flush with the top of the drawer.

3. Secure integrated panel to drawer using clamps. A robust tape may also be used. U-Line recommends the use of bar clamps to secure the panel to the drawer. If using tape, be certain the tape will not damage panel finish upon removal.

4. Using a 7/64″ (3 mm) drill bit, drill 6 pilot holes into the wood panel 1/2″ (12 mm) deep using the holes in the drawer frame as a guide.
   NOTICE It is important to ensure that all drilled holes are drilled to the correct depth in order to avoid splits in the wood when hardwood is installed.

5. Locate 12 of the #6x 1-1/2″ (38 mm) screws provided with your unit.

6. Using a Phillips screwdriver, place one screw into each of the 6 pilot holes and screw down. Do not overtighten screws.

7. Remove clamps from drawer.

NOTICE
If panel requires additional adjustment after removing clamps, slightly loosen each screw and adjust panel as necessary. Tighten screws upon completion.

Grille – Plinth Installation

REMOVING AND INSTALLING GRILLE
(PLINTH STRIP/BASE FASCIA)

WARNING

• Disconnect electric power to the unit before removing the grille (plinth strip/base fascia).
• When using the unit, the grille (plinth strip/base fascia) must be installed.

WARNING
DO NOT touch the condenser fins. The condenser fins are SHARP and can be easily damaged.

Removing the grille
(plinth strip/base fascia)

1. Disconnect power to the unit.
2. Loosen the two screws (1).
3. Remove grille (plinth strip/base fascia) (2) from unit.

Installing the grille

1. Align cabinet and grille holes and secure, but do not over tighten grille (plinth strip/base fascia) screws (1).
2. Reconnect power to the unit.

GENERAL INQUIRIES

• U-Line Corporation
• 8900 N. 55th Street
• Milwaukee, Wisconsin 53223 USA Monday – Friday 8:00 am to 4:30 pm CST T: +1.414.354.0300
• Email: sales@u-line.com
• u-line.com

CONNECT WITH US

SERVICE & PARTS ASSISTANCE
Monday – Friday 8:00 am to 4:30 pm CST T: +1.800.779.2547Service
Email: onlineservice@u-line.com
Parts Email : onlineparts@u-line.com

References

• Schilderwerken Ieper | Color by Cherchye: gevelrenovatie, decoratie, kaleien
• BestShop | Best Price, Smart Shopping
• Manual-Hub.com - Free PDF manuals!
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>