FUNTEK GT16 Sport Tuned Car Owner’s Manual
- June 16, 2024
- FUNTEK
Table of Contents
FUNTEK GT16 Sport Tuned Car
Product Information
This product is a high-performance model made with the highest attention and care. It is designed for users aged 14 and above. The product comes with a warranty, but certain components and damages are excluded from the warranty coverage. Wearing parts such asfuses and batteries, visual impairments, shipping, and transport costs are also not covered by the warranty.
Specifications
- Age Range: 14+
- Model: [Model Name]
- Warranty: Excludes certain components and damages
Product Usage Instructions
Disassembly and Battery Installation
To install the battery, follow these steps:
- Unlock the battery cover by sliding the lock/open switch.
- Remove the battery cover.
- Insert the battery into the compartment.
- Close the cover and ensure it clicks properly into place.
USB Charging
To charge the product using USB:
- Connect the USB charging cable (not included) to the power plug.
- Ensure adult supervision and stay nearby while charging.
Transmitter Batteries
To insert batteries into the transmitter:
- Open the battery compartment lid on the underside of the transmitter.
- Insert fully charged rechargeable batteries or new AA batteries, observing the correct polarity.
- Close the cover on the battery compartment, ensuring it clicks properly into place.
- Check that the cover is in its correct position.
Getting Started
Always turn on the transmitter first, then turn on the vehicle.
Binding
To bind the transmitter and the vehicle:
- Turn on the car power.
- Press and hold the BIND button while turning on the POWER.
- Release the BIND button once the lights turn stable green.
Usage
Follow these instructions for operating the vehicle:
- Adjust the steering neutral point using the left and right controls.
- Use the power adjustment potentiometer for braking, reverse movement, and driving forward to control speed.
- Pair the transmitter by switching it on.
FAQ
Should I turn on the transmitter before the receiver?
Yes, always turn on the transmitter before turning on the receiver in the
vehicle. Also, make sure to power off the receiver before turning off the
transmitter.
Can I operate the vehicle indoors?
No, it is recommended to operate the vehicle in a wide-open arena. Operating
it on slippery floors or indoors may result in crashes due to high speed.
Is the product waterproof?
The product has a waterproof feature, but please be cautious that the water
level should be lower than the bottom of the truck. Excessive water getting
into the body of the truck may cause damage or other related problems, and we
will not be responsible for such damages.
Should I start with low speed?
Yes, it is recommended to start at low speed to prevent the vehicle from
slipping or running on curves. Operating the vehicle at its highest speed may
cause harm to yourself and damage the vehicle.
How can I take care of the motor?
Please refer to the troubleshooting section in the user manual for motor care
instructions.
How can I troubleshoot issues with the product?
Please refer to the troubleshooting section in the user manual for guidance on
resolving common issues.
NOTICE
- Small parts. Keep out of reach of small children.
- Please operate in an open field without any wave interference.
- Please note the battery polarities when installing or replacing batteries
- Non-rechargeable batteries can not be charged
- Remove rechargeable battery pack from car before charging
- Charge the battery under adult supervision, don’t leave during charging
- Do not mix new and old bateries, or batteries of different types
- Remove batteries from car once they are exhausted
- Watch for short circuits at power terminals
- Touching the transmitter antenna while operating the car can affect the remote control distance; broken antennas should be handled by an adult
- This car is equipped with powerful driving forces , when moving at high speed, please do not try to break abruptly due to inertia.
- When the car move slowly, power is low. Please recharge following instructions.
- When charging, please ensure power sockets are connected properly.
- While not used for a long time ,please remove batteries from the car and the transmitter.
- Unpack the car under adult supervision.
- Keep this manual for future reference.
- Please store the car and the transmitter in a dry and cool environment.
- Keep away from fire, hot or humid environment.
- If car battery is wet, be sure to wipe and dry it completely to avoid any damage.
- On backout after the removal, please do not place discarded to avoid contamination sanitation
COMPONENT WARRANTY PERIOD
PLEASE READ THE FOLLOWING INFORMATION CAREFULLY !
Please note this is a high-quality hobby product and not a toy. Therefore, it
is necessary that children under 14 years are supervised by an adult. The
guardians and / or parents have the responsibility to provide the appropriate
guidance and supervision of the minors .
This product has a 90 day warranty, which is only guaranteed to the original
purchaser. The warranty valid only to products that have been purchased from
an authorized FUNTEK dealer. Warranty claims will be processed only with a
valid proof of purchase / receipts. If within the warranty period, a portion
of the product fails due to manufacturing defects, then it is within the
discretion of FUNTEK to repair it or replace it. The decision to repair or
replace the part will be taken by FUNTEK. After use, we do not offer new for
old warranty.
WARRANTY DISCLAIMER
This high-performance model was made with the highest attention and care and
should be treated with respect. Excluded from the warranty are components that
have been damaged by wrong installation, mishandling, accident, operation,
maintenance, lack of maintenance and care, as well as abuse and/or repair
attempts. Furthermore excluded from the guarantee are wearing parts such as
fuses and batteries, visual impairments, shipping -, and transport costs.
WARRANTY CLAIM
Please contact your dealer with the warranty claim and/or repair. Your dealer
and FUNTEK will make a proper decision that will help you as soon as possible.
For invalid warranty claims, you may be charged for the processing costs
before the parts are returned. All repairs which are necessary by negligence
or abuse are billed in advance. In case you decide that you do not want to
repair your product then FUNTEK editing reserves the right to charge shipping
costs.
OVERVIEW
QUICK START GUIDE
DISASSEMBLY AND INSTALL THE BATTERY
CHARGEMENT USB
TRANSMITTER BATTERIES
- Open the battery compartment lid on the underside of the transmitter.
- lnsert fully charged rechargeable batteries or new AA batteries observing the correct polarity. Close the cover on the battery compartment again. Ensure that the cover clicks properly into place. Check that it is in its correct position
GETTING STARTED
Always turn on the transmitter first, then the vehicle!
ADVICE
- Non-rechargeable batteries are not to be recharged.
- Rechargeable batteries are to be removed from the model before being charged.
- Rechargeable batteries are only to be charged under adult supervision.
- Batteries are to be inserted with the correct polarity.
- Exhausted batteries are to be removed from the model.
- The supply terminals are not to be short-circuited.
- Regular examination of transforrmer or battery charger for any damage to their cord, plug, enclosure and other parts.
BINDING
- Please turn on the car power.
- Please press the BIND and hold it, and turn on the POWER. Let go of the BIND bottom, so it will enter to Binding process.
- Once the lights goes to Stable Green lights,then the Binding process have been done
USE
- Raise the tyres off the ground The wheels are to follow the steering direction.
- lf the wheels operate in the opposite direction, operate the servo Reverse switch (ST in position REV).
- To regulate the driving speed, actuate the throttle/brake backwards (forward driving, accelerating) or forwards (braking, reversing)
OPERATION
- ALWAYS turn on your transmitter before you turn on the receiver in the vehicle. ALWAYS power off the receiver before turning your transmitter off.
- ALWAYS operate your vehicle in a wide-open arena. Operating the vehicle on slippery floors or indoors may crash because of the high speed.
- WARNING: 9130 waterproof feature, please be cautious that the water level should be lower than the bottom of the truck. If an excessive amount of water gets into the body of the truck and causes damage or other related problems, we will not be responsible for such damages. Customers will be responsible for any replacements and additional accessories if needed.
- ALWAYS start with low speed, or the vehicle may slip or run on curves. (as shown on Pic 1 ) NEVER operate your vehicle in max speed. Operating the vehicle in the highest speed may hurt you and damage your vehicle.
MOTOR CARE
- Seat the motor brushes by driving smoothly on a flat surface during use of the first battery charge. Failing to do so can greatly reduce motor performance and functional life.
- Prolong motor life by preventing overheating conditions. Undue motor wear results from frequent turns, stops and starts, pushing objects, driving in deep water and tall grass, and driving continuously uphill.
TROUBLESHOOTING
| Problem | Possible Cause | Solution |
|---|
Short run time
| • Battery damaged/not charged
• Motor dirty or brushes worn
| • Check/change battery
• Check/clean/replace
Sluggish action
| • Motor dirty or brushes worn
• Bind in drivetrain
• Vehicle battery is not charged
| • Check/clean/replace
• Clean/adjust
• Replace/recharge
Do not operate
| • Transmitter batteries low
• Transmitter powered off
• Vehicle battery is not charged
| • Replace/recharge
• Power On
• Replace/recharge
Poor range
| • Low transmitter batteries
• Receiver antenna damaged
| • Replace/recharge
• Check/repair/replace
The system will not connect
| • Transmitter and receiver too near each other
• Transmitter and receiver too near large metal objects (vehicles, etc.)
• Receiver accidentally put in bind
mode so the receiver is no longer bound
| • Move the transmitter 8–12 feet (2.4–3.6m) from receiver
• Move away from large metal objects (vehicles, etc.)
• Rebind transmitter and
receiver
The receiver quits responding During the operation|
• Low battery voltage
|
• Completely recharge battery
The receiver loses its bind| • Transmitter accidentally put in bind mode, ending bind to receiver| • Bind transmitter to receiver
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>