PROAIM P-CTST-01 Cam Tower Stand w Counterbalance Instructions
- June 16, 2024
- PROAIM
Table of Contents
PROAIM P-CTST-01 Cam Tower Stand w Counterbalance Instructions
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
-
Accessory Tray
-
Cam Tower Stand w/ Counterbalance
-
Platform Section -1 with Locking Pivot Wheel
-
Platform Section-2 with Locking Pivot Wheels
-
Camera Support Platform
-
2 x Screws
-
1x Spanner (Size:-17mm)
-
2x Allen Keys T-Type (Size:-3/16”& 4mm)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo- copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.
Cam Tower Stand Setup
Platform Section -1 with Locking Pivot Wheel
-
Loose all the screws of platform selection-1 as shown in image.
-
Now all screw has been removed as you can see in the image.
Platform Section-2 with Locking Pivot Wheels
-
Platform Section-2 with Locking Pivot Wheels
-
Use removed screw to secure the platforms together and tighten it by spanner.
-
Now stand the platform on its wheel
Cam Tower Stand w Counterbalance
-
Now mount tower stand on platform rod.
-
Secure the tower stand with the help of provided Allen key (Size:3/16”)
Camera Support Platform
-
Attach supporter platform to counter balanced column of cam tower stand.
-
Screw it with the help of Allen key (Size:4mm).
-
Remove screws from the bottom of counter balanced column.
Accessory Tray
-
Now place Accessory Tray with counter balanced column as shown in image.
-
Add screws to Accessory tray by the help of Allen key (Size:4mm) to secure.
-
The tray is properly attached.
Feature: It features a horizontal geared column equipped with a camera head at one end & is counterbalanced by weights on the other end; it can easily be adjusted in height and reach to achieve a desired shooting position.
Camera Support Platform
-
Now open the crank lever from supporter platform.
-
You can rotate crank to the rod of supporter platform.
-
Attach camera (Not included) to supporter platform and secure it by rotating knob
-
Open the knob of counter balanced knob to adjust height of supporter platform and secure it by closing knob back again.
OUR PROAIM CAM TOWER STAND W COUNTERBALANCE ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us immediately and we promise our utmost support and care until you use our product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>