H7122 Govee Smart Air Purifier User Manual

: June 4, 2024
: Govee

H7122 Govee Smart Air Purifier

Safety Instructions

Only use Smart Air Purifier as described in this manual.
Do not use without removing the plastic wrap from the filter. If not removed, the air purifier will not filter air, and may overheat, causing a fire hazard.
Do not use the air purifier outdoors.
Keep the air purifier away from water or wet, damp areas. Never place in water or liquid.
Do not use in excessively humid areas.
Keep the air purifier away from heat sources such as stovetops, ovens, or radiators.
Do not use where combustible gases, vapors, metallic dust, aerosol (spray) products, or fumes from industrial oil are present.
Keep 5 feet/ 1.Sm away from where oxygen is being administered.
Supervise children when they are near the air purifier.
Do not place anything into the openings of the air purifier.
Do not place heavy objects on the air purifier.
Keep the inside of the air purifier dry. To prevent moisture build up, avoid placing in rooms with major temperature changes or underneath air conditioners.
Always unplug the air purifier before servicing (such as when changing the filter).
Do not use the air purifier if it is damaged or not working correctly, or if the power cord or plug is damaged. Do not repair yourself. Contact Customer Support.
WARNING: To reduce the risk of fire or electric shock, do not use this air purifier in combination with any 3rd party controls (such as a dimmer switch).
Not for commercial use. Household use only.

Package Includes

Specifications

Getting to Know Your Smart Air Purifier

a. Panel
b. Air Outlet
c. Housing
d. Air Inlet
e. Dust Sensor
f. Filter Cover
g. Filter Cover Handle
h. Non-slip Pads
i. 3-in-1 True HEPA Filter
j. DC Input Port
k. Adapter Output Cable
I. Power Adapter

Getting Started

Rotate the bottom filter cover counterclockwise and take it out.
Remove the filter from its plastic packaging and place it back into the air purifier.
Reattach the filter cover and rotate clockwise to lock. The sound of “dah” indicates the filter cover is tighted up.
Place the air purifier on a flat, stable surface with the panel facing up. Allow at least 15 in/ 38 cm of clearance on all sides of the air purifier. Keep away from anything that would block airflow, such as curtains and cabinet.
Insert the adapter output cable into the DC input port, then plug the power adapter into a 120V socket. Now your purifier is ready to use!

Using Your Smart Air Purifier

You can access additional features using Govee Home app.

Note: You could peel off the protective film on the panel before using.

Functions & Controls

On/Off Button
Press to turn Smart Air Purifier on/off.
Fan Speed Button
Press to cycle through fan speeds: I (low), II (medium), and Ill (high).
Note: Tapping the Fan Speed Button while the air purifier is in Auto Mode, Sleep Mode or Custom Mode (if the display is on) will exit that mode.
Timer Button
Press to cycle thorugh timer options: 2H, 4H, 8H, and cancel. The purifier will turn off automatically when the set timer has expired.
Sleep Mode Button
Press to turn Sleep Mode on or off. When Sleep Mode is on, the air purifier will work in its lowest noise setting and the panel’s brightness will dim for more comfortable use at night.
Auto Mode Button
Press to turn Auto Mode on or off. The purifier will automatically adjust based on the environmental air quality.
Custom Mode Button
Press to turn Custom Mode on or off. The fan speed can be steplessly adjusted in the app and this customized speed will be saved and used when Custom Mode is on.
Lock Button
Press for 3 seconds to turn on Lock Mode. The panel buttons will be locked and cannot be triggered. Press for another 3 seconds to turn Lock Mode off. The Lock Mode Indicator will flash 3 times when any other button is pressed to remind that Lock Mode is still enabled.
Filter Change Indicator Button
When the filter expires, its exchange indicator will light up in red. After replacing with the new filter, press the button for 3s. If the indicator flashes 3 times, the reset is completed.
Note:

After the filter is reset, its usage time will be recalculated.
The exchange indicator can also be reset by pressing the button for 3 second even it does not light up.
Only use Govee filters compatible with H7122 smart air purifier.

Memory Function

This air purifier will save its previous settings when powered off (such as speed, mode, and Wi-Fi connection), and when it is powered back on, the settings will resume.

LED Indicators

Pairing Your Device with Govee Home App

Due to ongoing updates and improvements, Govee Home App may be slightly different than shown in the manual. In case of any differences, follow the in- app instructions.

To download Govee Home App, scan the QR code or search for “Govee” in the Apple App Store® (iOS devices) or Google Play Store (Android devices).
Note: Choose “Allow” to the permissions requested when opening Govee Home App for the first time. These permissions allow the app’s features to function normally and are not used to record personal, private information.
Turn on the Bluetooth in your smartphone.
Open Govee Home App, tap “+” icon in the top right corner and search for “H7122”.
Tap the device icon and follow the on-screen instructions to complete pairing.

Note:

You can use Govee Home App to connect your air purifier to Amazon Alexa or Google Assistant. Follow the in-app instructions to connect to your voice assistant.
Govee Home App is being continually updated and app features will be expanded.

About the Filters

The air purifier uses a 3-stage filtration system to purify air.

Pre-Filter

Captures large particles such as dust, lint, fibers, hair, and pet fur.
Maximizes the filter’s life by protecting it from large debris.

H13 True HEPA Filter

Captures at least 99.97% of airborne particles 0.3 microns (µm) in size.
Filters small particles such as fine dust, smoke particles, pollen, and pet dander.

Activated Carbon Filter

Physically adsorbs smoke, odors, and fumes.
Filters compounds such as formaldehyde, benzene, ammonia, hydrogen sulfide, and volatile organic compounds (VOCs).

Clean Air Delivery Rate

This air purifier has a Clean Air Delivery Rate of 240 cubic feet per minute (CFM), or 408 m3/h. The rating is measured at the air purifier’s highest speed.
Clean Air Delivery Rate (CADR) measures the efficiency of an air purifier by indicating the volume of clean air that it produces per minute. This is based on removal of dust, pollen, and smoke, which are the 3 most common indoor air pollutants. The higher the CADR, the more particles the air purifier will remove and the larger the area it can clean.

Air Change Per Hour

The air change rate is how many times all of the air in a room can be purified (or “changed”) by the air purifier in 1 hour. Air changes per hour are calculated on the recommended room size, assuming 8 ft/ 2.4 m ceilings.
For smaller rooms, the air change per hour will increase. This air purifier has an air change per hour of 5, which means it can change air 5 times per hour at the max speed in a single, closed room up to 527 ft2 / 49 m2• The air purifier is effective for larger rooms, but air purification will take longer, with fewer air changes per hour.
Note: To effectively clean air, keep windows and doors closed while the air purifier is on.

Humidity

Moisture may damage the filters. This air purifier should be used in an area with a humidity level below 85% RH. If you use the air purifier in excessively humid areas, the surface of the filter may become moldy.

Essential Oils

Do not add essential oils to the air purifier or filter. The filter will be damaged by the oil and may eventually release an unpleasant smell.
Do not use diffusers near the air purifier.

Care & Maintenance

Cleaning the Smart Air Purifier

Do not clean with abrasive chemicals or flammable cleaning agents.

Cleaning Steps

Unplug before cleaning.
Wipe the outside of the air purifier with a soft, dry cloth. If necessary, wipe the housing with a damp cloth, then immediately dry.
lt is recommended to vacuum the inside of the purifier.

Cleaning the Filter

Do not clean the filter with water or other liquids. The outer pre-filter should be cleaned every 2-4 weeks to increase its efficiency and extend its lifespan. The pre-filter should be cleaned by a soft brush or vacuum hose to remove hair, dust, and large particles.
Note: A 3-stage filter includes a Nylon Pre-Filter, True HEPA Filter, and Carbon Filter. The three parts of the filter should be replaced as a single unit.

Replacing the Filter

Unplug the air purifier and lay it on its side.
Remove the old filter.
Clean out any remaining dust or hair inside the air purifier using a vacuum hose. Do not use water or liquids to clean the air purifier.
Unwrap the new filter and place it into the housing.
Reattach the cover. Plug in the air purifier.
Reset the Filter Change Indicator.

Note:

To maintain the performance of your air purifier, only use official Govee filters. To buy replacement filters, visit Govee’s online store.
Remember to reset the Filter Change Indicator after changing the filter.

Filter Change Time Period

The filter should be replaced every 6-8 months. The exact date at which your filter may need to be changed may vary depending on how often you use your air purifier. Using your air purifier in an environment with relatively high pollution may mean you will need to replace the filter more often, even if the filter change indicator is off. The filter needs to be replaced in any following case:

Increased noise
Decreased airflow
Unusual odors
A visibly clogged filter

Resetting Filter Change Indicator

When the Filter Change Indicator lights red, it prompts to reset the filter service life.

Press and hold for 3 seconds. will flash 3 times and then turn off once successfully reset.
will light up as a reminder to replace the filter. The indicator should turn on within 6-8 months, though this time period can be longer or shorter based on the actual usage. You may not need to replace your filter yet, but you should check it when turns on and plan to replace it soon.
Reset the Filter Change Indicator when you have replaced the filter.

Storing

If not using the air purifier for an extended period of time, wrap both the air purifier and the filter in plastic packaging and store them in a dry place to avoid moisture damage.

Troubleshooting

The troubleshooting section below is for solving frequently asked questions for the purifier unit. If your problem persists, please contact customer support.

For Smart Air Purifier

For App & Connectivity

Cannot connect to Govee Home App.
- Make sure your smartphone is powered on and is not connected with other Bluetooth devices.
- Enable the smartphone’s Location Services.
- Try connecting with another smartphone.
- Make sure your app is the latest version.
- Make sure your Wi-Fi router is connected to the 2.4GHz network. Confirm the network is working correctly.
- Make sure the Wi-Fi password you entered is correct.
- Shorten the distance between the air purifier, Wi-Fi router, and the smartphone.
- Make sure your air purifier and the Wi-Fi router are located away from appliances that produce electromagnetic radiation (e.g. microwave ovens, refrigerators, etc.).
- lf you are using a VPN, try turning it off and then connecting the purifier.
- Disable portal authentication for your Wi-Fi network. If portal authentication is enabled, this air purifier will not be able to access your Wi-Fi network, and setup will fail. Portal authentication means that you need to sign in to your Wi-Fi network through a web page before you can use the Internet.
Cannot find the air purifier within in nearby Bluetooth devices list.
- The air purifier may be connected with another smartphone. Disconnect it from the other smartphone first.
The air purifier is offline.
- Make sure the air purifier is plugged in and powered on, then refresh “My Devices” in Govee Home App by swiping down on the screen.
- Make sure your router is connected to the internet, and your phone’s network connection is working.
- If the Wi-Fi password has been changed, the air purifier will automatically go offline. Try connecting it to the network again.
- Delete the offline air purifier from Govee Home app, then add and reconfigure the air purifier again in Govee Home App.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/1V technician for help.

FCC Radio Frequency Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure conditions. The min separation distance is 20cm.

FCC ID: 2AQA6-H7122
The following importer is the responsible party

Name: GOVEE MOMENTS(US) TRADING LIMITED
Address: 13013 WESTERN AVE STE 5 BLUE ISLAND IL 60406-2448
Email: support@govee.com
Contact information: https://www.govee.com/support

IC Statement

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

this device may not cause interference, and
this device must accept any interference, including interference that may cause undesired operation of the device.”

This Class B digital apparatus complies with Canadian ICES-003.
IC RF Statement:
When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Shenzhen lntellirocks Tech. Co., Ltd. is under license.

Customer Service