AnyCast M2 Wifi Display Receiver User Manual

AirPlay Box  User Manual

Product details

Mobile phones and flat-panel HDTV co-screen devices support all interfaces of mobile phones and flat panels. via WIFI settings can be used to project content on a mobile phone or flat screen to a high-definition television or projector. Film machines, such as  movies, TV programs, music, video, audio, photos, video clients, Safari browser, Chrome browser and other contents can be implemented. No longer use a small screen Act or trumpet to amuse yourself, from now on you can share happiness with your family and  friends through this product.

• Support IOS 8.0 or above system and compatible with the following devices: iPhoneXR/XS/XSMax/X/8P/8/11/11PRO,iP7Plus,iP7,iP6sPlus,iP6S,iP5,iP5s, ipSSE,iPotouch and all of the iPad with lightning interface.
• Support Android 6.0 or above system, such as Samsung,Huawei, VIVO,OPPO, Millet, OnePlus, SMARTISAN,MEIZU etc.
• Support HDTV and VGA simultaneous display

Introduction

Connection diagram

iOS system operation steps

Method 1: [OS directly connect (No need WIFI.If need WIFI, pis refer to method 2)

1. Click the WIFI in the setting page,then find the hotpot of AnyCast-xxxx Cast to connect the device: Fo cvample: AnyCast-%ox fixed password: 12345678
2. Slide the screen into the Apple Device Control Center. Click on the screen image and check the 2in 1 Cast device.

Notes: If Apple device not connect the WIFI,can only mirror local data or use the operating network to access the Intemet

Method 2: iOS system connect the router

1. Click the WIFI in the setting page,then find the hotpot of AnyCast-x0x to connect the device (if use the method 1 to connect, pls exit the “Mirror image”)
2. Open browser, input 192.168.68.1 and enter the setting page as show in below pictures
3. Slide the screen into the Apple Device Control Center. Click on the screen image and check the AnyCast-wox device.
   ( Note: open the video APP and click to send the APP video to the big screen without affecting other operations of the phone)

Android system operation steps

Method 1: Android system directly connect
Open the proiection function of mobiletablets search and connect AnyCast- on device
Protection function path for different device
Huwei Drop-down menu-wireless projection/mutti-screen interactive
Miltet Settino-more ways to link—wireless display
VIVO. Settino-more ways to link-wireless display
OPPO Settina-more ways to link—wireless display/multi-screen interactive
MEIZU. Setting-display-projection screen
Lenovo: Setting-display-wireless display
Samsung: Slide the mobile from top to bottom–Smart View
SMARTISAN: Wireless network-wireless display
Nubia: Screen projection

Method 2: Android system connect the router

1. Click the WIFI in the setting page,find the hotpot of AnyCast-xxxx to connect the device
   (if use the method 1 to connect, pis exit the “Miracst”. That is, press Reset button for 3 second)

2. Find the browser,input 192.168.68.1,and enter the setting page as show in below pictures

3. After completing above settings, open the video App.click to project the APP video onto big screen. Does not affect other operations of the phone.

FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This  equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing  measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>