Outop J6L011 4-Tier Printer Table with Socket and USB Charging Port Installation Guide
- June 16, 2024
- Outop
Table of Contents
Outop J6L011 4-Tier Printer Table with Socket and USB Charging Port
Before You Start
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver
and Hammer
Caution : If using a power drill or power screwdriver for screwing,
please be aware of to slow down and stop when screw is tight. Failure to do so
may result in stripping the screw. (Assembly speed can be increased by using
electric screwdriver)
Helpful Hints
PEOPLE NEEDED FOR ASSEMBLY: 1-2
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hamme.
- Slides are labeled with an R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the outer edge.
- If there is a back panel in the package, please install it to make sure your unit is complete and sturdy. lease fix all the screws provided for the back panel which can enhance product stability. If it is difficult to fix it when tightening, it can be fixed with the help of a hammer and then tightened.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
EXPLODED DRAWING
PARTS
REMARK
MINIFIX POSITION
Please do not screw A too deep or too shallow.
position
- Put a blanket under the board to avoid scratch or damage.
INSTALLATION INSTRUCTIONS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>