LUCiDE MARBOL Table Lamp Installation Guide
- June 4, 2024
- LUCIDE
Table of Contents
MARBLE Table Lamp
Installation Guide
MARBOL Table Lamp
INSTALLATION MANUAL
Thank you for purchasing a Lucide original! This manual will hopefully guide
you easily through the installation process. We aim to inspire and illuminate
our clients by offering trendy, high-quality, and affordable lighting. Welcome
to the community of #illuminatesyourworld
DISCOVER OUR COLLECTION!| CURIOUS ABOUT OUR BRAND?| ILLUMINATES YOUR
WORLD
---|---|---
Visit our website and discover our entire collection
https://qrcodes.pro/ctf05b| Our brand video gives you a glimpse behind the
scenes at Lucide https://qrcodes.pro/PEN8Q4| Take a look at how others
around the world use Lucide products https://qrcodes.pro/mJ5x94
Follow us for the latest lighting trends!
Item number: 0 6520 / 0 1/ 30
EAN code: 54112120 61447
RECOMMENDED LUCIDE
LIGHT SOURCE
4 90 21/ 0 4 / 60
Dimmable: Yes
Included: No
General
- Dimensions LxW xH: 15cm x 15cm x 32cm
- Main material: Metal
- Color: Black and Opal
- Style: Classic
- Shape: Round
- Weight: 0 ,91kg
Specifications
- Dimmable: No
- Light direction: Around (Diffuse)
- Adjustable in height: Not In Height Adjustable
- Directional: Not Direct ional
- Cable: Yes, Cable W it h Plug On Product
- Cable length: 150 cm
- Sensor: Without Sensor
- Control: On/ Off Sw it ch – In The Cord
- Power supply: Adapter/Power Grid
- IP-Class: 20
- Electric Class: 2
- Number of light sources: 1
- Lamp socket: E27
- Maximum wattage: 25W
- Power requirements: 220 -240 V~50 Hz
- Warranty: 2 Years
For more specifications of this product please visit www.lucide.com
TECHNICAL DRAWING & DIMENSIONS
Item number: 0 6520 / 0 1/ 30
EAN code: 54112120 61447
INSTALLATION DRAW ING SPECIFICATIONS
Item number: 0 6520 / 0 1/ 30
EAN code: 54112120 61447
Safety Instructions
Please read this notice carefully and keep it during the lifetime of this
product. Follow the instructions for a safe and correct installation and
functioning of the light fixture. The manufacturer does not accept any
responsibility for damage caused by improper installation and service.
Installation should always be done by a qualified electrician.
Always isolate the power before commencing installation, maintenance or
repair.
In case of doubts, please contact a qualified electrician.
Please pay attention to locations where the item can be installed (indoor,
outdoor, bathroom (for outdoor and bathroom installation, please see further).
Indoor items cannot be used in humid places. Do not put the item in contact
with water or any liquids or inflammable products. Always respect the minimal
distance (indicated on the light) to inflammable products. During
installation, make sure that the cables will not be squeezed or damaged by
sharp edges. If the external flexible cable is damaged, it needs to be
replaced exclusively by the manufacturer, his service agent, or a qualified
electrician. This is to avoid all risks. Because the temperature of the item
and the bulbs can get very high, they must cool down before being touched.
Always use the correct bulb (respect type and maximal wattage as indicated on
the product).
Explanation of the symbols that can appear on the fixture
| This item is only suitable for indoor use, exclusive bathroom
(except if a higher IP degree permits that the item can be used in the
bathroom).
---|---
| Legislation requires that all electrical and electronic equipment must be
collected for reuse and recycling.
Electrical and electronic equipment marked with this symbol indicating a
separate collection of such equipment must be returned to a municipal waste
collection point.
****| Class I: The item has an earth connection. The earth wire (green-
yellow) needs to be connected to the earth connection (marked with this
symbol).
| Class II: The item is double insulated and must not be connected to the
earth wire.
| Class III: The item is only suitable for lower voltage supply and must not
be connected to the earth wire.
| IP 20: Protection against contact with a finger
| If the protection glass is damaged or broken, it needs to be replaced
immediately.
| Please respect the minimum distance from the bulb to inflammable objects.
Warranty declaration:
Lucide NV warrants that the products supplied will be free from defects in
material and workmanship for a period of 2 years from the date of purchase by
the end user, if the item is installed and maintained properly as mentioned in
the user manual.
Exclusions for the warranty:
- Broken glass parts of the fixture will only be replaced within 14 days after purchase by the end user.
- Normal wear and tear, and discoloring as a result of normal use.
- Damage is caused by external causes like fire, water, wrong use/ installation or maintenance of the product.
For warranty claims the customer needs to hand over the defective fixture/part
and the original purchase ticket.
Further explanations can be found on our website.
www.lucide.com
LUCIDE NV
LUCIDE NV BISSCHOPPENHOFLAAN 145, 2100 DEURNE, BELGIUM
info@lucide.com
tel: +32(0)3 366 22 04
www.lucide.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>