LUCIDE 09936 Trigono Ceiling Spotlight Installation Guide
- June 4, 2024
- LUCIDE
Table of Contents
09936 Trigono Ceiling Spotlight
Installation Guide
09936 Trigono Ceiling Spotlight
INSTALLATION MANUAL
Thank you for purchasing a Lucide original!
This manual will hopefully guide you easily through the installation process.
We aim to inspire and illuminate our clients by offering trendy, high-quality
and affordable lighting.
Welcome to the community of #illuminatesyourworld
DISCOVER OUR COLLECTION!| CURIOUS ABOUT OUR BRAND?| ILLUMINATES YOUR
WORLD
---|---|---
Visit our website and discover our entire collection
https://qrcodes.pro/ctf05b| Our brand video gives you a glimpse behind the
scenes at Lucide https://qrcodes.pro/PEN8Q4| Take a look at how others
around the world use Lucide products https://qrcodes.pro/mJ5x94
Follow us for the latest lighting trends!
Item
number: 0 9936/ 0 2/ 31
EAN code: 54112120 93189
RECOMMENDED LUCIDE
LIGHT SOURCE
4 90 4 1/ 12/ 30
Dimmable: Yes
Included: No
General
- Dimensions LxW xH: 29,7cm x 12,7cm x 11cm
- Main material: Metal
- Ceiling rose material: Metal
- Color: W hit e
- Style: Modern
- Shape: Rectangle
- Weight: 0 ,93kg
Specifications
- Dimmable: Yes
- Light direction: Downlight
- Adjustable in height: Not In Height Adjustable
- Directional: Rot at able & Tiltable (360 Degrees)
- Cable: No Cable On the Product
- Sensor: Without Sensor
- Control: Light Sw it ch Cont rol
- Power supply: Adapter/ Power Grid
- IP-Class: 20
- Electric Class: 1
- Number of light sources: 2
- Lamp socket: ES111
- Maximum wattage: 40 W
- Power requirements: 220 -240 V~50 Hz
- Warranty: 2 Years
For more specifications of this product please visitwww.lucide.com
TECHNICAL DRAW ING & DIMENSIONS
TRIGONO
Item number: 0 9936/ 0 2/ 31
EAN code: 54112120 93189
INSTALLATION DRAWING SPECIFICATIONS
TRIGONO
Item number: 0 9936/ 0 2/ 31
EAN code: 54112120 93189
Safety Instructions
Please read this notice carefully and keep it during the lifetime of this
product. Follow the instructions for a safe and correct installation and
functioning of the light fixture. The
the manufacturer does not accept any responsibility for damage caused by
improper installation and service.
Installation should always be done by a qualified electrician.
Always isolate the power before commencing installation, maintenance, or
repair.
In case of doubts, please contact a qualified electrician.
Please pay attention to locations where the item can be installed (indoor,
outdoor, bathroom (for outdoor and bathroom
installation, please see further). Indoor items cannot be used in humid
places. Do not put the item in contact with water or any liquids or
inflammable products. Always respect the minimal distance (indicated on the
light) to inflammable products. During installation, make sure that the cables
will not be squeezed or damaged by sharp edges. If the external flexible cable
is damaged, it needs to be replaced exclusively by the manufacturer, his
service agent, or a qualified electrician. This is to avoid all risks.
Because the temperature of the item and the bulbs can get very high, they must
cool down before being touched. Always use the correct bulb (respect type and
maximal wattage as indicated on the product).
Explanation of the symbols that can appear on the fixture
| This item is only suitable for indoor use, exclusive bathroom
(except if a higher IP degree permits that the item can be used in the
bathroom).
---|---
| Legislation requires that all electrical and electronic equipment must be
collected for reuse and recycling.
Electrical and electronic equipment marked with this symbol indicating a
separate collection of such equipment must be returned to a municipal waste
collection point.
****| Class I: The item has an earth connection. The earth wire (green-
yellow) needs to be connected to the earth connection (marked with this
symbol).
| Class II: The item is double insulated and must not be connected to the
earth wire.
| Class III: The item is only suitable for lower voltage supply and must not
be connected to the earth wire.
| IP 20: Protection against contact with a finger
| If the protection glass is damaged or broken, it needs to be replaced
immediately.
| Please respect the minimum distance from the bulb to inflammable objects.
Warranty declaration:
Lucide NV warrants that the products supplied will be free from defects in
material and workmanship for a period of 2 years from the date of purchase by
the end user if the item is installed and maintained properly as mentioned in
the user manual.
Exclusions for the warranty:
- Broken glass parts of the fixture will only be replaced within 14 days after purchase by the end user.
- Normal wear and tear, and discoloring as a result of normal use.
- Damage is caused by external causes like fire, water, wrong use/ installation, or maintenance of the product.
For warranty claims the customer needs to hand over the defective fixture/part and the original purchase ticket.
LUCIDE NV
LUCIDE NV BISSCHOPPENHOFLAAN
145, 2100 DEURNE, BELGIUM
info@lucide.com
tel: +32(0)3 366 22 04
www.lucide.com