COOLER MASTER Dyn X Racing Seat User Manual
- June 16, 2024
- COOLER MASTER
Table of Contents
COOLER MASTER Dyn X Racing Seat
ATTACH RACING SEAT
STEP 1: LINE UP THREADED HOLES IN SEAT WITH HOLES IN SEAT BRACKETS.
STEP 2: ATTACH SEAT TO SEAT BRACKETS USING THE SOCKET HEAD SCREWS AND
WASHERS.
NOTE: THE DEFAULT POSITION ILLUSTRATED ON THE LEFT IS JUST ONE POSSIBLE
MOUNTING OPTION.
ATTACH HEADREST
THE HEADREST CAN BE USED IN ANY POSITION, AND IT IS MOST HELPFUL WHEN THE DYN X COCKPIT IS ROTATED BACK.
ATTACH THE HEADREST VELCRO STRAP
-
STEP 1 ATTACH THE HEADREST VELCRO STRAPPUT STRAPS THROUGH SEATBELT SLOTS
-
STEP 2 ATTACH VELCRO UNDER SEAT BACK CUSHION
-
STEP 3 CONNECT VELCRO STRAPS THAT RUN THROUGH THE SEATBELT SLOTS
-
STEP 4 CONNECT VELCRO STRAP THAT RUNS OVER THE TOP OF THE SEAT
-
STEP 5 WHILE SEATED, ATTACH HEADREST AT THE DESIRED HEIGHT
CHANGE SEAT CUSHION ACCENT COLOR
INCLUDED WITH THE DYN X RACING SEAT ARE RED AND BLUE SEAT CUSHION COVERS FOR THE BOTTOM CUSHION AND THE HEADREST.
STEP 1: FIND AND SPLIT THE VELCRO SEAM ON THE CUSHION.
STEP 2: REMOVE THE FOAM CUSHION FROM THE CUSHION COVER.
IT MAY HELP TO COMPRESS THE FOAM CUSHION.
STEP 3: INSERT THE FOAM CUSHION INTO THE DESIRED CUSHION COVER.
IT MAY HELP TO COMPRESS THE FOAM CUSHION.
STEP 4: REJOIN THE VELCRO SEAM.
SEAT DIMENSIONS
MEASUREMENT|
---|---
A: OUTER SEAT DEPTH| 500mm
B: OUTER SEAT HEIGHT| 925mm
C: OUTER SHOULDER WIDTH| 575mm
D: OUTER BOTTOM WIDTH| 540mm
E: MOUNTING WIDTH| 420mm
F: INNER SEAT WIDTH (BACK)| 360mm
G: INNER SEAT WIDTH (FRONT)| 430mm
H: SHOULDER SUPPORT HEIGHT| 625mm
I: SEAT DEPTH| 465mm
J: BELT SLOT HEIGHT| 55mm
K: MIDDLE OF BELT SLOT| 700mm
L: SEAT BACK DEPTH| 130mm
MOUNTING HOLE DISTANCE| 290mm
WARRANTY
Please visit: www.coolermaster.com for the terms of the warranty.