SHARP CY-301 Induction Cooker Instruction Manual
- June 16, 2024
- Sharp
Table of Contents
OPERATION MANUAL INDUCTION COOKER
MODEL CY-301
CY-301 Induction Cooker
Please see the date of manufacture marked on the product
Thank you very much for your purchase of our SHARP Induction Cooker. For
proper and effective use of the Induction Cooker, please read this manual
carefully before use and keep this manual for reference.
SAFETY INSTRUCTION
Please read the warning and instruction for use carefully before using this appliance and comply strictly for own safety and to prevent the damage that may occur on your property.
WARNING
-
Do not dismantle and refit parts or repair induction cooker by yourself.
-
Do not contact with plug with wet hands, when the cord Is damaged or plug is not inserted in place, do not use the appliance.
-
Never bend or bind power cord or apply excessive force to it, otherwise it will be damaged, if power cord is damaged, it must be repaired by professional personal to avoid electric shock, do not replace power cord by yourself.
-
Never use the appliance at where is likely to subject to damp or close to fire.
-
Never rinse directly the appliance with water to avoid damaging appliance.
-
Do not cook without load or overcook. Otherwise it will cause the cooker deformation.
-
Metallic objects such as knife, forks, sooons, lids Should not be placed on the hotplate since they can get hot. Remove the cover before canned food is heated, to avoid the risk resulting from heat expansion.
-
Do not carry the appliance during operation.
-
Do not let pins and metal wire and foreign objects into gas intake / vent.
-
Do not drop objects on the hotplate, in case hotplate occurs cracks, turn off the power supply immediately and unplug from the outlet and send it to repair.
-
Do not use the appliance on carpet or tablecloth, as the heat may caused burning.
-
Do not use the appliance near gas range or stove or similar.
-
Do not leave the plugged-in all the time. The noise from the pan may be incurred during high frequency use, slightly more the pan might stop the noise.
During use the running sound of fan will be heard for sometimes to reduce inner heat. -
Do not place a sheet of paper between the pot or the pan and the unit. The paper may get bumt.
-
Do not place near objects which are affected by magnet, sucn as: radios, televisions, magnet and credit cards.
-
The appliance is not intended to be operated by means of an external timer or separate remote-control system.
-
The symbol means : Caution, hot surface.
-
Please use above 15A appropriate electrical outlet, never use all-purpose outlet and do not use the appliance together with other appliance.
INSTRUCTION FOR USE
- Place the unit on the stable table and keep at least 10 cm distance between cooker body and adjacent objects.
- Never use the appliance at the place where children can reach.
- Total weight containing using pan and loaded food shall not exceed 4kg; otherwise it will damage and mal-function cooker body.
- Duration of continuous operation shall not exceed 4 hours, if necessary please allowit to stop 30 minutes interval for Induction Cooker in between its operation period.
- After cooking, high temperature heat produced by pan will conduct onto the appliance, never touch the top hotplate immediately.
- If the power cord or plug is damaged. The power cord must be replaced by the manufacturer, its aftersales service or similarly qualified persons in order to avoid a hazard.
- This appliance is not intended for use by person (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- This appliance is intended to be used in household and similar applications such as staff kitchen, hotel, apartment and condominium.
SPECIFIC INFORMATION
MODEL | CY-301 |
---|---|
Rated voltage(V) is | 220 |
Rated frequency (Hz) | 50 |
Rated power input (W) | 2,000 |
Product dimension (W x H x D) (mm.) | 300 x 65 x 380 |
Net weight (Kg.) | 4.32 |
“Detail is subject to change without prior notice.
DESCRIPTION OF PARTS
CONTROL PANEL
FUNCTION INSTRUCTION
-
ON/OFF Button
To switch on or off Induction Cooker simply press
ON / OFF button. -
“Up” or “Down” Button
Temperature and power setting can be adjusted by touching “Up” to increase or “Down” button to decrease respectively.
– Range of Wattage can be selected based on the following value : 400W, 800W, 1000W, 1200W, 1400W, 1600W, 1800W and 2000W.
– Range of Celsius(°C) can be selected based on the following value : 60°C,100°C, 140°C, 180°C, 200°C, 220°C and 240°C. -
TIMER Button
Timer mode function range from 59 minutes -23 hours. -
MENU Button
Cooking mode will be displayed by indicative light respectively from Hot Pot, Stir-Fry, Fry, Braise, Soup, Congee Boil & Milk.
FUNCTION BUTTON MECHANISM
-
LOCK Button (Child-Lock safety protection)
Lock Button is intended to guard against on unintended activation such as deterring children from using it or during cleaning the induction cooker itself.
To “LOCK / UNLOCK’ just touch the button for 3 seconds. Until the light indication ON / OFF.
NOTE The appliance will stop automatically when no any button is pressed within 2 hours.
USE INDICATION
-
Operation
Insert power cord into separate appropriate socket, then buzzer sound “BIB” once, digital tube and all indictors light up for 1 second digital tube displays and glint “- – – -” with circle, indicating the unit is energized.
Pot / Pan Detection
Place the pot / pan on the center of the square line as shown. Please make sure that the container surface must be more than 120 mm. but less than 180 mm.
-
How to use
Touch “ON/OFF” button, then buzzer sound “BIB” once, digital tube displays “00 00”, then you can choose the cooking function. At the same time the fan starts running, which can be adjusted by touching “Up” or “Down” button for adjusting heat temperatures as desire.
If the pan is not placed, the digital tube displays “EQ” and buzzer sound “BIB” will be heard at an interval of 38 seconds. The appliance will be entering ready State and “BIB” will be heard after 60s -
HOT POT Mode
The default voltage is 2000W, which can be adjusted by touching “Up” or “Down” button, when the voltage rises to the set value, the program will enter the automatic protection. -
STIR FRY Mode
Run at 240°C, by default, from with total of 7 level settings (60°C – 240°C), it can be adjusted by touching “Up” or “Down” button. When the voltage rises to the set value, the program will enter the automatic protection. -
FRY Mode
The default temperature is 220°C, which can be adjusted by touching “Up” or “Down” button. There are “140”, “180”, “200” & 220 four Celsius setting. When the temperature rises to the set Value, the program will enter the automatic protection. -
BRAISE Mode
The default time is 2 hours which can be adjusted by touching the timeing button then touching “Up” or “Down” button to adjust time, when the time rises to the set value, the program will enter the automatic protection. -
SOUP Mode
This function allow Induction Cooker to work on boiling soup until it is cooked and ready to be serve. When digital tube displays as “AU” , this appliance will heat up automatically until soup reaches boil point thereafter it will reneat soup in 110 minutes. Then this appliance will sound “BIB” for 10 times which will remind you as it is entering keep warm state in 70°C – 80°C, digital tube displays will shows as “- -”, after 1 hour the unit will be off automatically and it switches into ready state which digital tube displays as “—-”. -
CONGEE Mode
This function allow the appliance to work on cooking congee until it is cooked and ready to be serve. Digital tube displays “AU” , this appliance will heat up automatically until congee reaches to boil point and reheat distant. The longest time is 2 hours, when buzzer sound “BIB” for 10 times, the until will turn off automatic and switches into ready state. -
BOIL Mode
This function will boil water. Digital tube display will show as “AU” and this appliance will start BOIL mode automatically. When water reaches the boiling point, buzzer sound “BIB” for 10 times, the unit will turn into ready state which digital tube display as “—-”. -
MILK Mode
This function will heat up on milk, drink and latte keeping it in warm state. The temperature reaches to 60°C – 100°C this appliance will tum into warm state automatically. After 10 minutes, buzzer sound “BIB” for 10 times, the unit will turn into ready state which digital tube display as “—-”. -
Timer Function
It has both Time & Preset setting.
• TIME setting time to turn off, applicable with Hot Pot, Stir Fry, Fry & Braise mode
• PRESET setting time to turn on, applicable with Soup, Congee, Boil & Milk mode
6 Easy steps for OFF TIME Setting (Hot Pot, Stir Fry, Fry & Braise mode)
- Press on “ ON / OFF ” to activate OFF Time mode, the digital tube displays will show as “00 00”
- Then press “ MENU ” once & Indicative lights will show on TIME & HOT POT mode by default.
- Keep pressing “MENU ” to choose desired cook mode Hot Pot, Stir Fry, Fry & Braise mode.
- Then press “ TIMER ” to configure on Hour setting, “ Up / Down ” for hour adjustment.
- Press on “ TIMER ” again for minute settings, “Up / Down” for minute adjustment.
- Once duration of cooking has been enter, press “ TIMER ” to confirm.
6 Easy steps of PRESET Setting ) Soup. Congee, Boil & Milk mode)
- Press on “ TIMER ” to activate Preset mode, it will have buzzer sound “ BIB ” once which it means that it is on Preset setting.
- Digital tube displays will show as “ 00 00 ” & the indicative lights will show on both PRESET & SOUP mode by default.
- Press “ MENU ” to choose on desired cook mode ranging from Soup, Congee, Boil & Milk mode.
- Then press “ TIMER ” to configure on Hour setting, “ Up / Down ” for hour adjustment.
- Press on “ TIMER ” again for minute settings, “Up / Down” for minute adjustment.
- Lastly, once preset duration has been enter, press “ TIMER ” to confirm.
Note
– The time set range is 00:01 – 23:59
– “Up” & “ Down ” button can be either by pressing or hold down to scroll through digits.
– Please remove induction cooker plug from the power outlet after every use.
OPERATION PRINCIPLE
The operation principle of induction cooker is achieved by the current produced by magnetic field induction which electron circuitry board produces alternate magnetic field, when the pan bottom containing metal material is placed on the hotplate, the pan will immediately cut the alternate magnetic field and then the metal part of pan bottom produces the current (whirlpool), it makes iron molecule run irregularly at high speed, following the collision and friction between molecules produce heat energy which makes the appliance heat promptly, so that the purpose of cooking food is achieved.
PRODUCT ADVANTAGE
- High efficiency, saving energy and environmental protection: cooker body is heating part itself, so heat efficiency is very high and save energy greatly, when cooking food with induction cooker, there is be free of visible fire, smoke and waste gas, bear environment protection effect, safe and clean.
- Wider applicable voltage range: the unit can adjust automatically the wattage according to the power voltage, so that it avoids the trouble resulting from voltage fluctuation.
- Perfect safety protection function: the unit has safe protection function for over voltage, lower voltage or sudden voltage change. However normal over temperature function is quick and accurate.
- Accurate and perfect inspection for pan quality and no – load protection function : the unit can inspect whether the material or size of pan is applicalole, when the pan is moved away, the unit stop heating immediately and after 10 seconds the power is cut off. No matter how the pan is moved away quickly or slowly, no damage to induction cooker.
- Start self-diagnosis function and 2 hours timing shut-off function : it can judge whether induction cooker and operation are appropriate, that induction cooker is not operated for long time will be considered being forgotten or outgoing, shut of the power automatically after 2 hours, so it make you use it safely
- Multi – section wattage adjustment and multi-section temperature control : convenient and agile use, in addition temperature control compensation feature make the set temperature more exact.
- Multi – heating function : perform different cooking demand according to different power.
SAFETY PROTECTION EQUIPMENT
-
Over voltage protection and lower voltage protection
When power voltage is too high or low, induction cooker will compensate voltage automatically and adjust output power. -
Small metal part protection
For small iron metal which the diameter is less than 80mm, no power is outputted to avoid abnormal heating. -
No pan or improper pan protection
When no utensil is placed on the hotplate or the utensil is deviated greatly from the center, or the material of the utensil is not applicable, the power will not be outoutted and buzzer sound will be heard to alert until appropriate utensil is put in place. -
Over temperature protection
When the temperature of top hotplate is too high, induction cooker will stop automatically power output and long buzzer sound will be heard to alert until the temperature returns to normal. -
High voltage pulse protection During operation, when power supply receives a transient high voltage pulse (such as lightning strike), induction cooker will stop automatically and in a minute resume automatically.
COOKING UTENSIL SELECTION
-
Applicable
steel or cast iron, enameled iron, stainless steel, flat-bottom pans/pots with diameter between 120 – 180 mm.
-
Non-Applicable
Heat-resistant glass, ceramic container, copper, aluminum pans/pots Round- bottom pans/pots with bottom diameter less than 120 mm. and more than 180 mm.
CLEANING AND MAINTENANCE
- Unplug before cleaning and maintenance.
- When ceramic hotplate is made dirty, wipe it with wet cloth, or after wipe it with detergent or burnishing powder clean it with wet cloth.
- Wipe unit body and control panel with soft and wet cloth, neutral cleanser may be used for firm oil stain, then wipe the remained residue with soft and wet cloth.
- Never rinse directly with water or immense it in water.
- Keep the unit clean regularly to prevent black beetle entry into the fan so that the unit will fail, the surface of gas intake and vent may be cleaned (such as dust, smear) with cotton bar, a little detergent added on the toothbrush may be used for cleaning.
TROUBLESHOOTING
If the problem is found during operation, please make the check according to the following table before returning it to repair.
TROUBLE | CHECHING POINT |
---|
After plug in, no buzzer sound and no indicator light up after pressing ON
/OFF.| -Whether the plug is properly insert in the socket.
-Whether power switch or fuse in your home is cut off.
-Whether power is cut off.
Continuous 15 seconds beep sound will be heard and then the unit stops
operating.| -Whether the pan is applicable.
-Whether the pan is centered on the hotplate.
-Whether the bottom diameter of the pan is more than 12cm.
The unit stops heating suddenly during use.| -Whether ambient temperature is
very high. -Whether gas intake or vent is jammed.
-It means reaching the set temperature when the unit is at warming state.
-Safety system may operates, wait for 10 minutes, to restart.
The temperature cannot be controlled when frying or grilling food.| -Whether
the pan bottom is concave / non-flat. -Whether power indictor is lighted.
The induction cooker will stop heating if the following malfunctions occur, after 3 seconds, the display will show the malfunction alarm, the malfunction code will show on the center of display, you can clear the display by pressing the switch button, and the appliance will enter the standby state.
DISPLAY | DIRECTION |
---|---|
EO | Check whether the pan is in place. |
El | The circuit is malfunctioned. |
E2 | The temperature sensor is open-circuited or short-circuited. |
E3 | The voltage is higher (260V-275V). |
E4 | The voltage is lower (145V-165V). |
E5 | The cooker surface temperature is higher. |
E6 | IGBT temperature is higher than 95°C for 3 seconds. |
E7 | The IGBT temperature sensor is open-circuited or short-circuited. |
sole Distributor in Thailand
THAI CITY ELECTRIC CO., LTD.
1643/4 New Petchburi Rd., Makkasan, Ratchathewi,
Bangkok 10400Tel. 0 2333 3111Call Center 0 2254 5000
E-mall:callcenter@thaicity.co.th
sharpweeclub
Documents / Resources
|
SHARP CY-301 Induction
Cooker
[pdf] Instruction Manual
CY-301 Induction Cooker, CY-301, Induction Cooker, Cooker
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>