greemotion GM-2011-2PK Sintra Dining Chair Instruction Manual
- June 1, 2024
- greemotion
Table of Contents
greemotion GM-2011-2PK Sintra Dining Chair
SAFETY INSTRUCTIONS AND WARNINGS
- The product is to be used exclusively for its intended purpose.
- Regularly check the condition and functionality of the product. If you noticeany damage, the product should no longer be used.
- Only use the product on solid and level ground.
- Make sure the product is positioned securely.
- WARNING! Risk of clamping/crushing fingers during assembly and disassembly of the product.
CLEANING AND MAINTENANCE
The effects of the weather can cause slight alterations to the appearance of the garden furniture. Please store the garden furniture in a dry place during winter. To clean the piece of furniture, use a damp cloth and for more stubborn dirt use a mild soap solution and a soft brush. Never use aggressive cleaning agents, pressure washers or steam jets to clean the product. Toclean the cushion/seat cover quickly, use a damp soft cloth. Some stains canbe removed with a mild soap solution and a soft brush. Never use abrasive cleaning agents or solvents. Make sure that the cushion filling does not become wet and that no moisture damage or mould can build upon the inside! When it rains or there is moisture in the air, the cushions and pads should be taken indoors and stored in a protected and dry location. Cushions/pads that have become wet should be allowed to dry out completely. Do not fill damp cushions/pads! The covers can be removed, allowing them to be washed in the washing machine. Remove the cover, turn it inside out and zip close. Wash the cover with similar colours in the washing machine.
IMPORTANT:
covers! Be sure to read the washing instructions on the sewn-in care label on the Cover
Contact
Need Help?
- 1-909-348-5495
- greemotionusa.com
- support@greemotionusa.com
- /greemotionUSA
PARTS
HARDWARE
ASSEMBLY INSTRUCTIONS
-
Align Seat (2) with Back (1). Apply pressure to secure.
-
Rotate to side. Secure with washer (8) and bolt (5) with supplied Allen key (10).
Attention:
Make sure that each bolt needed for all steps matches the corresponding figure to ensure proper assembly. -
Align Left Arm (3) with Seat (2). Secure with washer (8) and bolt (6).Rotate and repeat for Right Arm (4).
Note: The labels marked “L” and “R’ on the arms (#3 and #4)| should coincide with Figure 3 to ensure proper assembly. -
Rotate upright. Secure Arms (3, 4) to Back (1) using washer (8) and bolt (7).
-
Secure Seat Cushion (9) usingstring.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>