Shantou TengShen Electronics M6PLUS Wireless Headphone Instructions
- June 13, 2024
- Shantou TengShen Electronics
Table of Contents
Shantou TengShen Electronics M6PLUS Wireless Headphone Instructions
Key Operating Instructions
Long press three seconds is power on.off
In Wireless mode when get the calling.Short Press is answer the calls; Long Press is Refuse to listen, continuous push 2 times is redial
Playing: Short Press:Play/Pause;
In Wireless/MP3 mode, Short Press:Previous; Long Press: volume-
In FM mode,Short Press: Previous; Long Press:volume-
In Wireless/MP3 mode, Short Press:next; Long Press:volume+
In FM mode, Short Press:next frequency; Long Press:volume+
Short Press to change the model, Wireless/MP3/FM Radio
LED Indicator
- Wireless mode: pairing status blue light flashing, after pairing the blue light slow flashing.
- In MP3 mode:the blue light will slow flashing when playing;
- In FM mode:When listening to the radio station blue light. search radio flashing.
- In charging mode:the red light is on steadily when charging, when it’s fully charged,the red light will be off.
LINE Connecting TO Audio Jack
- Insert audio line, Go directly to the AUX LINE IN pattern, at this time for ordinary headset headphones, buttons
- Support mobile phone/iPod/MP4/MP3/CD/PC,etc
Functional Parameter
- USB charge: DC5VIN
- SNR: 88Db
- FM frequency: 87.5-108MHz
- Wireless distance: 10meters
- Frequency: 50HZ-20KHz
- Output power: 35mW
- Wireless frequency: 2.401-2.480GHz
- Charging time: 2hours
- Call duration: 6hours
- Standby time: 18hours
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>