Rowenta Premiss BS1400 Bathroom Scale Instruction manual

Rowenta Premiss BS1400 Bathroom Scale

Initial Setup and Battery Installation

Unboxing

Remove the Rowenta Premiss BS1400 Bathroom Scale from its box.

Battery Installation

• Locate the battery compartment at the back of the scale.
• Open the battery compartment by sliding the cover or pressing the indicated area.
• Insert a CR2032 lithium 3V battery into the compartment. Ensure the battery is placed according to the polarity (+/-) directions shown inside the compartment.
• Close the battery compartment securely after inserting the battery.

Usage and Weight Capacity

Automatic On Function:

• Step onto the scale to automatically turn it on. The display will activate, indicating that it is ready to measure your weight.

Accurate Weight Measurement:

• Stand still on the scale with your weight evenly distributed on both feet.
• Hold your position until the weight reading is displayed and stabilized.

Automatic Off Function:

• The scale will automatically turn off after a period of inactivity to conserve battery life. This is indicated by the scale returning to a blank display.

Minimum and Maximum Weight Capacity:

• The scale has a minimum weight capacity, indicated by the ’10 kg’ on the display. Ensure that the item being weighed meets or exceeds this minimum to obtain a reading.
• The scale also has a maximum weight capacity, highlighted by ‘150 kg’ on the display. Do not exceed this weight to prevent damage to the scale and ensure measurement accuracy.

Unit Selection and Reset Procedure

Resetting the Scale:

• If necessary, reset the scale to ensure accuracy. Typically, this can be done by pressing a reset button or holding down the unit button for a few seconds. The exact reset method is not shown, but it often involves the actions depicted, such as flipping the scale over and pressing a button.

Changing the Unit of Measurement:

• The scale can display weight in kilograms (kg), pounds (lb), or stones (st.lb).
• To cycle through the units, press the unit button located at the back or the side of the scale.
• The display will show the selected unit of measurement, which changes each time the button is pressed, following the sequence: kg > lb > st.lb.

Confirming the Unit Selection:

• Once you have selected your desired unit, step off the scale and it should save your selection.
• The next time the scale is activated, it will display the weight in the chosen unit of measurement.

Troubleshooting and Maintenance Instructions

Error Display and Correction:

• If an error message (“Err”) appears on the display, it may indicate an unstable surface or an improper stance.
• Ensure the scale is on a flat, stable surface and stand still in the center of the scale with weight evenly distributed.

Low Battery Indicator:

• When the battery is low, a “Lo” indicator may appear on the display.
• To replace the battery, turn the scale over and open the battery compartment.
• Remove the old battery and insert a new CR2032 lithium 3V battery, making sure to match the polarity as indicated.
• Close the battery compartment securely.

Cleaning the Scale:

• To clean the scale, wipe it with a damp cloth. Avoid using harsh chemicals or submerging the scale in water.
• Regular cleaning will ensure the longevity and accuracy of the scale.

Recalibrating the Scale:

• If the scale is not showing accurate readings or after battery replacement, it may need recalibration.
• This can typically be done by stepping on the scale to turn it on, then stepping off to let it automatically turn off. This process can reset the scale’s internal sensors.

Safety and Care Instructions

• Do not place the scale on uneven or soft surfaces such as carpets or rugs; use on a flat, hard surface for accurate readings.
• Avoid using the scale in wet areas to prevent slipping or damage to the electronics.
• Do not stand on the scale with wet feet to prevent slipping.
• Do not use the scale near sharp objects that could scratch or damage the surface.
• Do not overload the scale beyond its maximum capacity, as this can damage the sensors and lead to inaccurate readings or malfunction.
• Do not attempt to disassemble or repair the scale yourself.
• Clean the scale with a slightly damp cloth, avoiding the use of harsh chemicals or abrasives.
• Stand still and centered on the scale during weight measurement.
• Store the scale in a safe place where it is not likely to be knocked over or subjected to sudden impacts.
• Be aware that moving the scale can require recalibration (stepping on and off) for accurate weight measurement.
• Handle the glass surface with care to prevent breakage.

Frequently Asked Questions

How do I know if my Rowenta Premiss BS1400 scale is calibrated correctly?

When stepping onto the Rowenta scale, it should automatically zero out before displaying your weight. If it does not, step off, allow it to shut off, then step back on to recalibrate.

What should I do if my Rowenta Premiss BS1400 scale keeps showing an 'Err' message?

Make sure the Rowenta scale is on a hard, flat surface, and your feet are dry when stepping onto it. If 'Err' continues to show, try resetting the scale or replacing the batteries.

How often should I replace the batteries in my Rowenta Premiss BS1400 scale?

The batteries in the Rowenta scale should last for a considerable amount of time, but if you notice the 'Lo' battery indicator or experience inconsistent readings, it's time to replace the batteries.

Can I use my Rowenta Premiss BS1400 scale on carpet?

For accurate measurements, the Rowenta scale should be used on a hard, flat surface. Using it on carpet can lead to incorrect readings due to instability.

What is the maximum weight the Rowenta Premiss BS1400 scale can measure?

The Rowenta Premiss BS1400 scale has a maximum weight capacity of 150 kilograms. Do not exceed this limit to avoid damaging the scale.

How do I switch between weight units on my Rowenta Premiss BS1400 scale?

To switch units on the Rowenta scale, press the unit button (if present) until your desired unit (kg, lb, st.lb) is displayed. The scale should remember your selection for future measurements.

What is the best way to clean my Rowenta Premiss BS1400 scale?

Clean your Rowenta scale with a damp cloth. Avoid harsh chemicals and do not submerge the scale in water to prevent damage to the electronic components.

Why does my Rowenta Premiss BS1400 display my weight in the wrong unit?

If your Rowenta Premiss BS1400 is showing the weight in an incorrect unit, you can change it by pressing the unit button. Continue to cycle through the options until you reach your desired unit of measurement.

What should I do if my Rowenta Premiss BS1400 does not turn on?

First, check to ensure that the battery in your Rowenta Premiss BS1400 is not depleted and is inserted correctly, respecting the polarity. If the scale still does not turn on, contact Rowenta customer support for further assistance.

Can I use my Rowenta Premiss BS1400 scale for commercial weighing purposes?

The Rowenta Premiss BS1400 is designed for personal home use and may not be suitable for commercial applications. It is calibrated for human body weights within its specified range.

How do I store my Rowenta Premiss BS1400 scale when not in use?

Store your Rowenta Premiss BS1400 in a dry location and avoid exposure to extreme temperatures or humidity. Also, make sure it is placed in a manner that prevents it from tipping over or being stepped on unintentionally.

Is the Rowenta Premiss BS1400 scale suitable for medical use?

The Rowenta Premiss BS1400 is intended for personal home use and is not certified for medical use. For medical-grade measurements, please use scales designed specifically for that purpose.

Reference:Rowenta Premiss BS1400 Bathroom Scale Instruction manual- device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>