BEAST LAB 11105 Beast Creator Instruction Manual

11105 Beast Creator

Product Information

Specifications:

• Power Mode Switch Heat Dial
• Fingerprint Scanner
• Power Mode Beaker Switch
• Chamber
• Lid
• Base Latch
• Battery Panels
• Emergency Lever
• Beast Latch A

Product Usage Instructions

Section 1: Getting Ready

To get ready for your Beast Creator experiment, follow these
steps:

1. Make sure the Power Mode Switch Heat Dial is in the middle
   position and the Emergency Lever is up.

2. Add 6x AA alkaline batteries to the Battery Panels. Make sure
   not to tip the Beast Creator on its side when inserting
   batteries.

Section 2: Preparing Your Experiment

Before you begin your experiment, prepare the Beast Creator by
following these steps:

1. Cut away the 3 zip ties as shown.
2. Remove the printed wrap from the Chamber.
3. Place your Beast Creator on a baking tray to prevent mess
   during the experiment.

Section 3: Starting Your Experiment

To start your experiment, follow these steps:

1. Flick the Power Mode Switch to Creation Mode.

2. When the Fingerprint Scanner flashes, press it to
   continue.

3. Unscrew the lid from the Chamber and fill the Beaker with water
   to the indicated level. Then pour the water into the Chamber.

4. When the Heat Dial flashes, turn it to the indicated
   position.

Section 4: Creating Shark Species

To create a shark species, follow these steps:

1. When the Fingerprint Scanner flashes, press it to
   continue.

2. Add the Fossil Fragment to the Chamber.

Section 5: Powering up the Attack

To power up the attack of your Beast, follow these steps:

1. When the Fingerprint Scanner flashes, press it to
   continue.

2. Add the Attack Serum to the Chamber.

Section 6: Colorizing Your Beast

To add color to your Beast, follow these steps:

1. When the Fingerprint Scanner flashes, press it to
   continue.

2. Add the Skin Scrapings to the Chamber.

3. When the Heat Dial flashes, turn it to the indicated
   position.

Section 7: Unleashing Your Beast’s Roar

To give your Beast a powerful roar, follow these steps:

1. When the Fingerprint Scanner flashes, press it to
   continue.

2. Add the Roar Rocks to the Chamber.

Section 8: Completing the Experiment

To complete your experiment, follow these steps:

1. When the Fingerprint Scanner flashes, press it to
   continue.

2. Add the Pandemonium Crystal to the Chamber.

Section 9: Safely Shutting Down the Experiment

To safely shut down the experiment, follow these steps:

1. When the alarm flashes, quickly screw the lid onto the
   chamber.

2. When the Heat Dial flashes, turn it to the indicated
   position.

Section 10: Revealing Your Beast

To reveal your Beast, follow these steps:

1. Cut away the zip ties as shown.
2. Flip the yellow Latches down to unlock the Base. Lift the
   Chamber off.

Section 11: Unleashing Your Beast

To unleash your Beast, follow these steps:

1. Cut away the ties.
2. Turn Beast Latch A counter-clockwise.
3. Remove your Beast and the weapon from the base.

Frequently Asked Questions (FAQ)

Q: Can I use rechargeable batteries instead of AA alkaline

batteries?

A: It is recommended to use AA alkaline batteries for optimal
performance. Rechargeable batteries may not provide enough
power.

Q: Is it safe to use the Beast Creator on a countertop without

a baking tray?

A: It is recommended to use a baking tray to prevent any mess
during the experiment. Without a tray, there is a higher chance of
spills and stains on your countertop.

Q: Can I reuse the Fossil Fragment, Attack Serum, Skin

Scrapings, Roar Rocks, and Pandemonium Crystal for multiple
experiments?

A: No, these ingredients are designed for single-use only. Each
experiment requires fresh ingredients for accurate results.

Q: What happens if I accidentally tip the Beast Creator on its

side when inserting batteries?

A: Tipping the Beast Creator on its side when inserting
batteries may cause damage to the internal components. It is
important to keep the Beast Creator upright during battery
installation.

GET READY!
WWHITEHNDEEVSILTRFOURCCTEIOSNT,HWRIELALTYEONUOBUERRWEAODRYLDTO DEFEND MANKIND? WCCWORIOYMTRHSBLTDTIANH’SLEESMTPWHOOEIWSTCTHEHFRTEAHOAOERFTSPSICROCIMEIMENENEACARLPEGEEAYSXNSOPDEFRNTPECEADECNAOHDTFNOETMORHLSOOE.NGIYU,M UCSOEMYPOLUETREBTEHAESETXCPREREAIMTOERN,TTAONCDAPRREEFPUALRLYE FOR WILD BATTLE ACTION! THE POWER TO PROTECT THE PLANET IS NOW
BEAST IN YOUR HANDS.
WHICH
CWRIELLAYTOEU ?
SCAN TO SEE AN EASY HOW-TO VIDEO.
Parental consent required before going online and viewing online content.

DISCOVER YOUR BEAST CREATOR
Lid

Chamber
Base Latch

Battery Panels
Emergency Lever

PREPARE YOUR EXPERIMENT
CONFIRM THESE STARTING POSITIONS
1
Power Mode Switch Heat Dial must be Emergency in middle position. in start position. Lever Up.
2 Add 6x AA alkaline batteries.
IMPORTANT! Do not tip your Beast Creator on its side when inserting batteries!

Heat Dial

Fingerprint Scanner

Power Mode

Beaker

Switch

2

3

BEFORE YOU BEGIN
IMPORTANT! Cut away the 3 zip ties as shown.
1
2
Remove printed wrap from Chamber.
WARNING! Experiments can get messy. Place your BEAST CREATOR on a baking tray for easy clean up.
4

BEGIN YOUR EXPERIMENT
1 Flick Power Mode Switch to Creation Mode to start.
2 When Fingerprint Scanner flashes, press to continue.
3 Unscrew lid from Chamber. Fill Beaker with water to the level shown, then pour into Chamber.
4 When Heat Dial flashes, turn to position shown.
5

1. CREATE SHARK SPECIES
1 When Fingerprint Scanner flashes, press to continue.
2 Add Fossil Fragment.

2. POWER UP THE ATTACK
1 When Fingerprint Scanner flashes, press to continue.
2 Add Attack Serum.

3. COLORIZE YOUR BEAST
1 When Fingerprint Scanner flashes, press to continue.
2 Add Skin Scrapings.

This tooth fragment is the core building block of the Beast and determines which species you create.
3 When Heat Dial flashes, turn to position shown.
6

The serum creates a foamy reaction that adds raw fury and attack power to the Beast.
3 When Heat Dial flashes, turn to position shown.
7

An unpredictable mix of skin cells that merge with the Beast to create unique markings and armored skin.
3 When Heat Dial flashes turn to position shown.
8

4. UNLEASH YOUR BEAST’S ROAR
1 When Fingerprint Scanner flashes, press to continue.
2 Add Roar Rocks.

5. COMPLETE THE EXPERIMENT
CAREFULLY ADD THE FINAL INGREDIENT 1 When Fingerprint Scanner
flashes, press to continue.
2 Add Pandemonium Crystal.

6. CONTAIN THE DANGER!
SAFELY SHUT DOWN THE EXPERIMENT
1 When alarm flashes, quickly screw lid onto chamber.

When added, this powder has a fizzy explosive reaction which gives your Beast its ferocious roar!
3 When Heat Dial flashes turn to position shown.
9

Beware! Destructive and chaotic energy in crystal form. Powerful when mixed with organic materials.
3 When Heat Dial flashes turn to position shown.
Proceed with caution!
10

2 Pull down on Emergency Lever to drain the liquid.
11

7. REVEAL YOUR BEAST
1 Cut away zip ties as shown.
2 Flip yellow Latches down to unlock the Base. Lift the Chamber off.

8. UNLEASH YOUR BEAST!
1 Cut away the ties. Turn Beast Latch A counter clockwise.
A
2 Remove your Beast and the weapon from the base.

WHICH
DID YOU C

BEAST
REAT E?

12

13

9. GET TO KNOW YOUR BEAST
1

Battle roar SFX

Activate powers

Light up Pandemonium Core
Fully poseable
2 Attach weapon to arm.

Pandemonium weapon

Refer to INSTRUCTION MANUAL 2 to find out

14

more about your BEAST.

SCAN TO FIND OUT MORE!
Parental consent required before going online and viewing online content.
PRINTER TO REPLACE WITH FSC LOGO
IMPORTANT: Contains color which may stain some fabrics and surfaces. Use toy on a protected surface.
www.beastlab.com
©2022 The Moose Group

INSTRUCTION MANUAL 1
BEAST CREATOR EXPERIMENT

References

• Beast-Lab Unleash Your Beast - Moose Toys

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>