ZEISS CP.3 Compact Prime Lenses Instruction Manual

: June 16, 2024
: Zeiss

Table of Contents

Lens components
Safety Tips
Handling
Technical Data
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ZEISS CP.3 Compact Prime Lenses Instruction Manual

Lens components

Rear lens element
Lens mount
Aperture ring
Aperture index mark
XD version only:
External socket (Female 4-Pin mechanical connector)
Focus ring
Focus index mark
Front lens element

Safety Tips

Safety & Handling

Never point the lens directly towards the sun because there is a significant risk of harming your eye-sight. Always attach the lens cap when the lens is not in use. Otherwise, there is danger of fire!

Storage & Transportation

Use the product only in temperatures ranging between -20°C and 40°C. Store this product only in temperatures ranging between -40°C and +70°C. The product is not completely water resistant, dust resistant or waterproof. Protect the camera and lens appropriately when in the rain and in damp or dusty environments. Should the product be exposed to moisture, remove it from the camera. Allow the device to dry completely before you use it again. Do not attempt to dry the product with the aid of an external heat source, e.g. in a microwave oven or with a hairdryer.

Modification, Service and Repair

You are allowed to do the following modifications: Changing the mount, changing the external socket, adjusting the flange focal distance, switching the scale ring and updating the firmware. Please follow the instructions on our website: www.zeiss.com/cine/manuals

Do not undertake any other unauthorized modifications or repairs on the product yourself. By disassembling it, damage may be caused which is not covered by the warranty. lf it needs repair, please contact your authorized dealer and distributor. For this purpose, see www.zeiss.com/cine

European Directive of Regulation

When the product left the factory it was in a completely safe working condition. It meets the electromagnetic compatibility requirements set out in Directive 2014/30/EU and bears the CE test mark.

Disposal

Do not dispose of the product as household waste but please follow the applicable statutory regulations of the relevant country. Consult local authorities about the options for disposal and recycling if necessary.

Warranty

The product is subject to the statutory warranty of 12 months.
The warranty can be extended to 24 months by registering the product at: www.zeiss.com/cine/register

Damage to or problems caused by the unauthorized opening of the product are not covered by the warranty. Before submitting a warranty claim, make sure that the possibility of an operator error has been ruled out. Please refer to the support information in this regard at www.zeiss.com/cine

Handling

Intended Use
ZEISS Compact Prime CP.3 lenses are designed for the use on cameras with interchangeable lenses. The usage in any other scenario is not recommended.

Removing the Rear Cap
Remove the rear cap from the lens by turning it clockwise (F) or counter- clockwise (EF, MFT, PL, E).

Attaching the Rear Cap
Attach the rear cap to the lens by turning it counterclockwise (F) or clockwise (EF, MFT, PL, E).

Mounting and Removing the Lens
Please refer to the mounting instructions on the user guide of your camera.

Lens Care Tips

To ensure that your lens is always in perfect condition, the presence of any form of dirt or humidity on the glass surface should be avoided. Dust on the lens can be removed carefully with a soft brush, stains and fingerprints with a soft, dry and clean microfiber cloth. To remove stubborn dirt, we additionally recommend the use of the ZEISS cleaning fluid. Please follow the instructions of the ZEISS Lens Cleaning Kits.

Customer Support

Your nearest ZEISS dealer can be found on the homepage www.zeiss.com/cine

Technical Data

Versions
ZEISS Compact Prime CP.3 from ZEISS are currently available in two versions:

ZEISS Compact Prime CP.3 – without electronic interface
ZEISS Compact Prime CP.3 XD (eXtended Data) – with electronic interface

CP.3 lenses are available in and can be modified to have the following mounts:

Mounts	CP.3	CP.3 XD
PL	■
PL (with electronic interface)		■
EF	■	■
F	■	■
E	■	■
M FT	■	■

Further technical information on the lenses can be found on: www.zeiss.com/cine/cp3

Disclaimer:
To ensure proper and safe use, we recommend that you read these safety and operating instructions first before using the product and then store them in a safe place. Non-observance of these instructions could lead to injury or damage.

Carl Zeiss AG reserves the right to change these specifications without any prior notice. A continuously updated version of the instruction manuals can be found at www.zeiss.com/cine/manuals

All rights reserved. This manual, or parts thereof, may not be reproduced without prior written permission from Carl Zeiss AG, not stored in retrieval systems, or transmitted in any form, whether electronically, mechanically, by photocopy, recording or other media.

Carl Zeiss AG
Camera Lenses
73446 Oberkochen
Germany
www.zeiss.com/cine