COSTWAY B0B3TF8ZRY Garden Gazebo with Mosquito Net Instruction Manual

June 16, 2024
COSTWAY

COSTWAY B0B3TF8ZRY Garden Gazebo with Mosquito Net Instruction Manual
COSTWAY B0B3TF8ZRY Garden Gazebo with Mosquito Net

Before You Start

Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.

IMPORTANT:

KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE.

WARNING:

  1. Two people are required for assembly.
  2. Some parts may contain sharp edges. We recommend that that you wear protective gloves.
  3. When assembling and using this product, basic safety precautions should always be followed to reduce the risk of personal injury or damage. Please read all instructions before assembly and usage.
  4. Do not leave the gazebo in the place where there is a risk of high winds, as possible damage will occur to the structure.
  5. WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS GAZEBO/ CANOPY/ FABRIC This gazebo/ canopy meets the flammability requirements of CPAI-84. The fabric may burn if left in continuous contact with any flame source. The application of any foreign substance to the gazebo/ canopy fabric may render the flame-resistant properties ineffective.

PREPARATION:

Before beginning assembly of this product, make sure all parts are present. Compare parts with package contents list. If any part is missing or damaged, do not attempt to assemble the product.

EXPLODED DRAWING

Product Overview

Part list

1| x4| Part List| Upper post
---|---|---|---
2| x4| Part List| Lower post
3| x8| Part List| Long support
4| x4| | Short support
5| x4| Part List| Top short beam
6| x4| | Top long beam
A| x4| | Base
B| x4| | Beam connector
C| x1| | Top connecto
D| x1| | Small canopy
E| x1| | Big canop
F| x1| | Mosquito netting
z| x12| | Joint
AA| x8| | Dia.4180mmStake
BB| x8| | Rope
CC| x8| Part List| Dia.6
260mm Big stake
DD| x40| | Ring

Assembly Instruction

Assembly Instruction
Assembly Instruction
Assembly Instruction
Assembly Instruction
Assembly Instruction
Assembly Instruction
Assembly Instruction
Assembly Instruction
Assembly Instruction
Assembly Instruction
Assembly Instruction

Care and Maintenance

  • The steel components of our garden fittings and furniture are treated with anti-rust paint to prevent them from rusting. However, due to the nature of steel, surface oxidation (rusting) will occur once these protective coatings are scratched.
  • To minimize this condition, we recommend care when assembling & handling the product to prevent scratching the paint. Should any scratching or damage occur, we recommend immediate touch up with rust inhibiting paint.
  • Surface rust can also be easily removed with a very light application of common cooking oil. If surface oxidation (rusting) occurs and if no measure is taken to prevent this, the oxidation may start dripping on to deck or patio and cause damaging stains, which may be difficult to remove. This can be prevented if the above mentioned measures are taken to keep the product from oxidizing.
  • Use damp cloth to wipe off the stains as quickly as possible.
  • If necessary, wash with a mild solution of soap and water; rinse thoroughly and dry completely.
  • Periodically check and ensure that all bolts are well-tighten during use

Return / Damage Claim Instructions

DO NOT discard the box / original packaging.
In case a return is required, the item must be returned in original box. Without this your return will not be accepted.
Take a photo of the box markings.
A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps our staff identify your product number to ensure you receive the correct parts.
Take a photo of the damaged part (if applicable).
A photo of the damage is always required to file a claim and get your replacement or refund processed quickly. Please make sure you have the box even if it is damaged.
Send us an email with the images requested.
Email us directly from marketplace where your item was purchased with the attached images and a description of your claim.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals