DTK PRM-20I E1 Both Slot 1 and Socket 370 ATX Mainboard Instructions

DTK PRM-20I E1 Both Slot 1 and Socket 370 ATX Mainboard

Product Information

Specifications

• Product Name: DTK Both Slot 1 and Socket 370 ATX Mainboard
• Model: PRM-20I E1
• Form Factor: ATX
• Dimensions: 305mm (W) x 190mm(L)
• Architecture: IBM PC/AT and PCI 2.1/2.2 compatible
• CPU Slot:
  • Supports Intel Socket Celeron processor
  • Supports Intel FA-PGA Pentium III processor
  • Supports Intel Pentium III, Pentium II processor
  • CPU FSB support: 66/100/133 MHz
• Chipset: Intel 82810E chipsets Winbond 83627HF
• Main Memory:
  • 2 DIMM sockets constitute 4 memory banks
  • DIMM Type: 16/64/128/256MB 168-pin unbuffered 3.3V SDRAM with SM Bus connections for memory detection
  • ECC Functions ensure data correction and integrity (SDRAM only)
  • Maximum Size: 512MB
  • 100MHz SDRAM support
• Power Management Features:
  • True green functions: support SMM, SMI and CPU stop clock function
  • ACPI/PC98 compatible
  • H/W Monitoring: CPU voltage, System Temp., Fan speed
  • S/W Management: LAN Desk Client Manager LAN, Modem and Keyboard wakeup function
• Audio: AC-Link with AC97 Compliant Software Audio with AC97 Codes
• VGA:
  • 3D Hyper Pipelined Architecture
  • Full 2D H/W Acceleration
  • Motion Video Acceleration
  • 3D Graphics Visual/Texturing Enhancements
  • Integrated 24-bit 230MHz RAMDAC
  • DDC2B compliant H/W Motion Compensation Assistance for S/W MPEG2 Decode
  • On board 4MB SDRAM for video cache
• I/O Interface:
  • Two fast serial ports (16550)
  • One EPP/ECP parallel port
  • Built-in FDC supports 1.2M/1.44M/2.88M FDD
  • Two enhanced PCI IDE channels which support up to 4 IDE devices with PIO Mode 4 transfers up to 16.6MB/sec
  • Support Ultra DMA/66, Ultra DMA/33 transfers up to 66MB/sec
  • PS/2 mouse and keyboard support
  • IrDA/FIR support
  • Double Deck USB connectors
• System BIOS:
  • Award BIOS with 2MB/4MB or 8MB Firmware Hub
  • ACPI/PnP support
  • TrendTM ChipAway Virus Anti-Virus Program built-in
• Expansion Slots: 5 PCI bus master, 1 AMR slot

Product Usage

CPU Installation

1. Ensure the motherboard is powered off and disconnected from the power source.
2. Open the CPU socket by lifting the lever.
3. Align the CPU’s notches with the socket’s keys.
4. Gently place the CPU into the socket, ensuring it is properly seated.
5. Lower the lever to secure the CPU in place.
6. Connect the CPU fan to the designated connector on the motherboard.

Memory Installation

1. Ensure the motherboard is powered off and disconnected from the power source.
2. Locate the DIMM sockets on the motherboard.
3. Unlock the DIMM slots by pushing down on the clips at each end.
4. Insert the memory module into the slot at a slight angle, aligning the notch on the module with the key in the slot.
5. Press down firmly on both ends of the module until it clicks into place and the clips lock into position.

Expansion Card Installation

1. Ensure the motherboard is powered off and disconnected from the power source.
2. Locate an available PCI or AMR slot on the motherboard.
3. Remove the corresponding slot cover from the computer case.
4. Align the expansion card’s connector with the slot on the motherboard.
5. Gently press down on the card until it is fully inserted into the slot.
6. Screw the expansion card into place using the provided screws.

Power Connection

1. Ensure the motherboard is powered off and disconnected from the power source.
2. Locate the main power connector on the motherboard.
3. Connect the power supply’s main power cable to the main power connector, ensuring it is securely attached.
4. Connect any additional power cables required by the CPU or other components.

Peripheral Connections

1. Ensure the motherboard is powered off and disconnected from the power source.
2. Locate the appropriate connectors on the motherboard for your peripherals (e.g., USB, serial, parallel).
3. Connect the peripherals to their respective connectors, ensuring a secure connection.

FAQ

• Q: What CPUs are supported by the DTK Both Slot 1 and Socket 370 ATX Mainboard?
  A: The DTK Both Slot 1 and Socket 370 ATX Mainboard supports Intel Socket Celeron processors, Intel FA-PGA Pentium III processors, and Intel Pentium III/Pentium II processors.

• Q: What is the maximum memory size supported by the motherboard?
  A: The motherboard supports a maximum memory size of 512MB with 100MHz SDRAM support. It has 2 DIMM sockets that can accommodate 16/64/128/256MB 168-pin unbuffered 3.3V SDRAM modules.

• Q: Does the motherboard have built-in audio capabilities?
  A: Yes, the motherboard features AC-Link with AC97 Compliant Software Audio with AC97 Codes for audio output.

The Wayback Machine – https://web.archive.org/web/20010422014451 / http://www.dtk.com.tw:80/mboard/20ie1.html

DTK Both Slot 1 and Socket 370 ATX Mainboard

PRM-20I E1 PCI Single Processor ATX Format Intel 82810E High Performance Mainboard

CPU Slot:

• Support Intel Socket Celeron processor
• Support Intel FA-PGA Pentium III processor
• Support Intel Pentium III, Pentium II processor
• CPU FSB support 66/100/133 MHz

Chipset:

• Intel 82810E chipsets
• Winbond 83627HF

Architecture:
IBM PC/AT and PCI 2.1/2.2 compatible

Main Memory:

• 2 DIMM sockets constitute 4 memory banks
• DIMM Type – 16/64/128/256MB 168-pin unbuffered 3.3V SDRAM with SM Bus connections for memory detection
• ECC Functions ensure data correction and integrity (SDRAM only)
• Maximum Size – 512MB
• 100MHz SDRAM support

Power Management Features

True green functions: support SMM, SMI and CPU stop clock function

ACPI/PC98 compatible

• H/W Monitoring: CPU voltage, System Temp., Fan speed
• S/W Management: LAN Desk Client Manager
• LAN, Modem and Keyboard wakeup function

Audio:

• AC-Link with AC97 Compliant
• Software Audio with AC97 Codes

VGA:

• 3D Hyper Pipelined Architecture
• Full 2D H/W Acceleration
• Motion Video Acceleration
• 3D Graphics Visual/Texturing Enhancements
• Integrated 24-bit 230MHz RAMDAC
• DDC2B compliant
• H/W Motion Compensation Assistance for S/W MPEG2 Decode
• On board 4MB SDRAM for video cache

I/O Interface:

• Two fast serial ports (16550)
• One EPP/ECP parallel port
• Built-in FDC supports 1.2M/1.44M/2.88M FDD
• Two enhanced PCI IDE channels which support up to 4 IDE devices with PIO Mode 4 transfers up to 16.6MB/sec
• Support “Ultra DMA/66”, “Ultra DMA/33” transfers up to 66MB/sec
• PS/2 mouse and keyboard support

IrDA/FIR support
Double Deck USB connectors

System BIOS:
Award BIOS with 2MB/4MB or 8MB Firmware Hub

ACPI/PnP support
Trend™ ChipAway Virus Anti-Virus Program built in

Expansion Slots:

• 5 PCI bus master
• 1 AMR slot

Form Factor:

• ATX
• 305mm (W) x 190mm(L) 4 Layer PCB

This Web Page was created by Patrick Lee/dik.com.fw. © 2000. All rights reserved.

References

• DTK | Directorio de Páginas Web
• DTK PRM-20I E1
• DTK PRM-20I E0
• DTK AWARD
• DTK CERTIFICATIONS
• COMPANY
• DTK DOWNLOAD PAGE
• DTK JOB
• Branch Office
• DTK PRODUCTS
• TECHNICAL

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>