Woodpeckers T-Square Time Tool Owner’s Manual
- June 16, 2024
- Woodpeckers
Table of Contents
Racold CDR Dlx Plus Electric Storage Water Heater
OVERVIEW
HARDWARE
(1 ) Rack-It™
(2) Rack-it Mounting Screws
(1) 1 /16″ Hex Wrench
Scan the QR code above to watch the video or
visitwoodpeck.com under the video tab towards the
bottom of the product page.
If you think you’re m1ss1ng anything, email us at
mailroom@woodpeck.com.
You can also call us at 800-752-0725
from 9:00 a.m. to 4:00 pm. EST Monday – Friday
ADJUST THE ANGLE
-
Loosen the (2) Angle Lock Knobs on the rear of the T-Square. The Angle Lock Knobs do not need to be loosened very much, one quarter to a half tum should be more than enough. FIGURE A.
-
Rotate the Blade relative to the Protractor Head until the desired angle is achieved.
-
The angle is read from the Hairline Indicator. FIGURE B.
-
Re-tighten the Angle Lock Knobs to secure the angle.
SCRIBING GUIDES
-
Set the Blade angle to 90° NOTE:
The Scribing Guides only function correctly when the blade is set to 90°. -
Place a mechanical pencil in the desired hole, then slide the Head along the edge of the material while moving the marking instrument with your other hand.
CALIBRATION
The Hairline Indicator is factory calibrated on the Protractor T-Square. If the angle measurements are off, re-calibration may be necessary.
- Begin by loosening the (2) Angle Lock Knobs on the rear of the T-Square.
- Set the T-Square to go0 by using a known good square reference, such as a Woodpeckers 1281 Square (Sold Separately at woodpeck.com). FIGURE B.
- Once set to go0and lock the (2) Angle Lock Knobs to secure the angle. FIGUREA.
- Next, loosen the (2) Button Head Screws that secure the Hairline Indicator to the pivoting core using the Hex Wrench.
- Keep the Hairline Indicator pressed against the circular section at the top end of the Blade, and pivot until the Hairline reads exactly on the go0 line.
- Tighten the (2) Button Head Screws on the Hairline Indicator in place.
Your Protractor T-Square is now re-calibrated.
woodpeckers, LLC Strangsville, Ohio woodpeck.com
© 2023 Woodpeckers, LLC
woodpeck.com
At Woodpeckers we are constantly reviewing & improving our tools.
The most current version of our instruction manuals are always available to
download at woodpeck.com.
(Located in the bottom section of the tool’s page under the “Additional
Information” or Instructions” tabs.)
Be the first to know all the new products, One11ME Tools & sales by
subscribing to our eClub. (Located at the top center of our webpage
woodpeck.com.
Subscribe to our YouTube channel to stay up-to-date on all the latest tool
tips & tricks.
INTERACT WITH US! Follow us on Facebook, lnstagram & TikTok!
Enjoy shop tips, project ideas, tool techniques & more in our Woodworking Resource Center/Blog. (Located at the bottom center of our webpage woodpeck.com.)
WARNING: This product exposé you to chemicals, including chromium , which is known to the state of California to cancer and birth defects or other reproductive harm . for more information go towww.P65Warnings.ca.gov
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>