QAZQA 106013 Jeana WL 2 Wood Modern Wall Light Instruction Manual

QAZQA 106013 Jeana WL 2 Wood Modern Wall Light

Product Information

Specifications

• Model: Jeana WL 2 Wood 106013
• Power: 220-240V~ 50Hz
• IP Rating: IP20
• Overall Size: 100mm x 200mm
• Maximum Bulb Wattage: 2xGU10 LED Max.7W
• Manufacturer: FittinQ B.V.
• Manufacturer Address: Smaragdweg 52, 5527 LB Hapert, The Netherlands
• Manufacturer Website: www.qazqa.nl

Frequently Asked Questions

• Q: Can I use higher wattage bulbs than the specified maximum?
  • A: No, using bulbs with a wattage higher than the specified maximum can damage the product and may pose a safety risk.
• Q: Can I install this product outdoors?
  • A: No, the Jeana WL 2 Wood 106013 has an IP20 rating, which means it is suitable for indoor use only. Exposing it to outdoor conditions can lead to damage and malfunction.
• Q: How do I contact customer support for this product?
  • A: You can contact FittinQ customer support by visiting their website at www.qazqa.nl and finding their contact information.

Product Usage Instructions

Section 1 – Safety Precautions

1. Always disconnect the power before installing or cleaning the product.
2. Avoid exposing the product to moisture or extreme temperatures.
3. Do not use the product if it is damaged or shows signs of malfunction.
4. Keep the product away from flammable materials.

Section 2 – Installation

1. Select a suitable location for mounting the Jeana WL 2 Wood 106013. Ensure there is enough space for proper ventilation.
2. Mark the position for drilling screw holes on the wall.
3. Drill the holes as marked and insert the provided screws.
4. Attach the product securely to the wall using the screws.

Section 3 – Bulb Installation

1. Ensure the power is disconnected before installing or replacing the bulbs.
2. Unscrew the protective cover of the bulb holder.
3. Insert the GU10 LED bulbs into the holders and screw them in securely.
4. Replace the protective cover.

Section 4 – Cleaning and Maintenance

1. Disconnect the power before cleaning the product.
2. Use a soft, dry cloth to remove dust and dirt from the surface of the product.
3. Avoid using abrasive cleaners or solvents that may damage the finish.

Section 5 – Troubleshooting

• If you encounter any issues with the Jeana WL 2 Wood 106013, please refer to the troubleshooting section of the user manual or contact the manufacturer for assistance.

Safety Precautions

Installation Instructions

Dimensions

• Jeana WL 2 Wood 106013
  • Overall size: 2xGU10 LED Max.7W

SAFETY INSTRUCTION

Please study the instruction manual and below information carefully before installing or using this product.
Please keep this user manual for further reference

1. The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
2. Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
3. The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
4. Exterior lighting must not be installed during rain.
5. Take account of the minimal separation distance from other objects and the room required around the fitting.
6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
8. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
9. Take account of all available technical information.
10. Meaning of symbols:
    • This icon indicates the level of water-proof and dust-proof
    • Protection Class I: the fitting must be earthed
    • Protection Class II: the fitting is doubled insulated and does not require earthing
    • Protection Class III: the fitting is low voltage
    • Minimum distance from lighted objects (meters)
    • The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceed; different items require different kind of light sources with different bulb icons
    • The armature is designed to work only with the indicated voltage. Different items require different working voltage.
    • The luminaire can be used in combination with a dimmer
    • The luminaire can be dimmed by wall switch
    • The reference light angle and light space of the luminaire
    • This luminaire cannot be disposed together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste
11. Take note of the symbols when connecting wires:

• *  **L:** Live conductor

  • : Earth conductor
  • N: Neutral conductor

FittinQ B.V.

• Smaragdweg 52, 5527 LB Hapert, The Netherlands
• www.qazqa.nl

FittinQ LTD

• 55 Baker Street, London, W1U 7EU United Kingdom

References

• QAZQA - Quite Unique | QAZQA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>