PHILIPS BVP171 SmartBright LED Floodlight Instruction Manual
- June 16, 2024
- Philips
Table of Contents
PHILIPS BVP171 SmartBright LED Floodlight
Symbols
Dimensions
Product Type| Power| Lumen output| | Color| CCT| Voltage| Frequency|
---|---|---|---|---|---|---|---|---
BVP171| 30W| 2600lm| 0.85| Grey| CW NW WW| 220-240V| 50/60Hz| 0.027
BVP172| 50W| 4300lm| 1.6| 0.054
BVP173| 70W| 7800lm| 1.7| 0.049
BVP174| 100W| 11200lm| 2.3| 0.056
BVP175| 150W| 17000lm| 3.8| 0.09
BVP176| 200W| 22000lm| 4.5| 0.102
Product Type| Power| A| B| C| D| E| F| G| H| I| J
---|---|---|---|---|---|---|---|---|---|---|---
BVP171| 30W| 195| 195| 155| 143| 34| 75| 80| Ø10.2| 8.5| 600
BVP172| 50W| 270| 270| 205| 202| 38| 101| 120
BVP173| 70W| 300| 265| 235| 190| 40| 140| 156| Ø8.5| 600/1000 *
BVP174| 100W| 356| 310| 235| 190| 53| 135| 210
BVP175| 150W| 375| 340| 310| 260| 65| 185| 210| Ø16.5
BVP176| 200W| 390| 350| 355| 290| 65| 220| 210
Mounting Instructions
Connect the power cord
- Always use IP65 or higher IP rated junction box/connector for wiring connection.
- The Luminaire should never be used in submerged wet conditions e.g. under water, soil, snow etc.
- The wiring connection should also never be used in submerged wet conditions e.g. water, soil, snow etc. OR must use IP68 junction box.
- The warranty is void, in case any of the instructions / guidelines are not followed as per given mounting instruction.
- This product is not supplied with any junction box / connector.
- For further clarification, please contact the manufacturer.
- To reduce the risk of strangulation the flexible wiring connected to this luminaire shall be effectively fixed to the wall if the wiring is within arm’s reach.
The terminal block should be complying with GB13140.2/GB13140.3
Fix bracket
Two slot holes must be fixed by screw and washer when installing, outer dimension of washer must be larger than 14mm
Fasten the bolt
Product Type| Power| Run Current (A)(@230 V)| Start (Inrush) Current(A) /Ipeak
(A)| Start Current Duration (μs) / T(@50% of I peak) (μs)| Touch current or
protective conductor current (mA)| Maximum Number of Luminaire on MCB 16A Type
B (pcs)| Maximum Number of Luminaire on MCB 16A Type C (pcs)| Mains surge
immunity（KV）
---|---|---|---|---|---|---|---|---
diff. mode| comm. mode
BVP171| 30W| 0.14| 1.2| 3.3| <3| 42| 70| 2| 4
BVP172| 50W| 0.23| 2.9| 0.23| <3| 27| 45| 2| 4
BVP173| 70W| 0.3| 9.2| 66| <3.5| 37| 37| 2| 4
BVP174| 100W| 0.42| 9.7| 65| <3.5| 26| 26| 2| 4
BVP175| 150W| 0.67| 10.6| 66| <3.5| 17| 17| 6| 6
BVP176| 200W| 0.90| 11.5| 77| <3.5| 13| 13| 6| 6
The leakage current (touch current or protective conductor current) of
electrical circuit may be greatly dependent upon elec trical supply cables
used such as its rating and length, proper connection of electrical supply
cables to luminaires and wiring connection topology of luminaires to the
supply electrical ci rcuit amongst other site conditions.
* In some cases referred to as Earth Leakage Current, using this current value to calculate the Maximum Connection Number of Luminaries with the ELB used.
Product list
Product list
NO.| Description| Power(W)| LEDs| CCT
1| BVP176 LED220/WW 200W WB GREY SAA KC| 200| 221| 3000K
2| BVP176 LED220/WW 200W WB GREY IN| 200| 221| 3000K
3| BVP176 LED220/WW 200W WB GREY CE| 200| 221| 3000K
4| BVP176 LED220/NW 200W WB GREY SAA KC| 200| 221| 4000K
5| BVP176 LED220/NW 200W WB GREY IN| 200| 221| 4000K
6| BVP176 LED220/NW 200W WB GREY CE| 200| 221| 4000K
7| BVP176 LED220/CW 200W WB GREY SAA KC| 200| 221| 5700K
8| BVP176 LED220/CW 200W WB GREY IN| 200| 221| 5700K
9| BVP176 LED220/CW 200W WB GREY CE| 200| 221| 5700K
10| BVP175 LED170/WW 150W WB GREY SAA KC| 150| 166| 3000K
11| BVP175 LED170/WW 150W WB GREY IN| 150| 166| 3000K
12| BVP175 LED170/WW 150W WB GREY CE| 150| 166| 3000K
13| BVP175 LED170/NW 150W WB GREY SAA KC| 150| 166| 4000K
14| BVP175 LED170/NW 150W WB GREY IN| 150| 166| 4000K
15| BVP175 LED170/NW 150W WB GREY CE| 150| 166| 4000K
16| BVP175 LED170/CW 150W WB GREY SAA KC| 150| 166| 5700K
17| BVP175 LED170/CW 150W WB GREY IN| 150| 166| 5700K
18| BVP175 LED170/CW 150W WB GREY CE| 150| 166| 5700K
19| BVP174 LED112/WW 100W WB GREY SAA KC| 100| 121| 3000K
20| BVP174 LED112/WW 100W WB GREY KR| 100| 121| 3000K
21| BVP174 LED112/WW 100W WB GREY IN| 100| 121| 3000K
22| BVP174 LED112/WW 100W WB GREY CE| 100| 121| 3000K
23| BVP174 LED112/NW 100W WB GREY SAA KC| 100| 121| 4000K
24| BVP174 LED112/NW 100W WB GREY IN| 100| 121| 4000K
25| BVP174 LED112/NW 100W WB GREY CE| 100| 121| 4000K
26| BVP174 LED112/CW 100W WB GREY SAA KC| 100| 121| 5700K
27| BVP174 LED112/CW 100W WB GREY IN| 100| 121| 5700K
28| BVP174 LED112/CW 100W WB GREY CE| 100| 121| 5700K
29| BVP173 LED78/WW 70W WB GREY SAA KC| 70| 90| 3000K
30| BVP173 LED78/WW 70W WB GREY CE| 70| 90| 3000K
31| BVP173 LED78/NW 70W WB GREY SAA KC| 70| 90| 4000K
32| BVP173 LED78/NW 70W WB GREY CE| 70| 90| 4000K
33| BVP173 LED78/CW 70W WB GREY SAA KC| 70| 90| 5700K
34| BVP173 LED78/CW 70W WB GREY CE| 70| 90| 5700K
35| BVP172 LED43/WW 50W WB GREY SAA KC| 50| 76| 3000K
36| BVP172 LED43/WW 50W WB GREY CE| 50| 76| 3000K
37| BVP172 LED43/NW 50W WB GREY SAA KC| 50| 76| 4000K
38| BVP172 LED43/NW 50W WB GREY CE| 50| 76| 4000K
39| BVP172 LED43/CW 50W WB GREY SAA KC| 50| 76| 5700K
40| BVP172 LED43/CW 50W WB GREY CE| 50| 76| 5700K
41| BVP171 LED26/WW 30W WB GREY SAA KC| 30| 40| 3000K
42| BVP171 LED26/WW 30W WB GREY CE| 30| 40| 3000K
43| BVP171 LED26/NW 30W WB GREY SAA KC| 30| 40| 4000K
44| BVP171 LED26/NW 30W WB GREY CE| 30| 40| 4000K
45| BVP171 LED26/CW 30W WB GREY SAA KC| 30| 40| 5700K
46| BVP171 LED26/CW 30W WB GREY CE| 30| 40| 5700K
The corrosive atmosphere or hazardous materials such as sulfur, chlorine, phthalate, etc. must be avoided during the use and storage.
Please read this manual carefully before using the product.
- Do not switch on before complete installation.
- The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEE electrical regulations or the national requirements.
- The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- The luminaire is complied with IEC 60598.
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
Signify (China) Investment Co., Ltd.
Building No. 9, Lane 888 Tianlin Road,
Minhang District, Shanghai, China
Postalcode: 200233
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>