emerio BL-127784.1 Blender Instruction Manual
- June 9, 2024
- emerio
Table of Contents
emerio BL-127784.1 Blender Instruction
SAFETY INSTRUCTIONS
Before use make sure to read all of the below instructions in order to avoid injury or damage, and to get the best results from the appliance. Make sure to keep this manual in a safe place. If you give or transfer this appliance to someone else make sure to also include this manual. In case of damage caused by user failing to follow the instructions in this manual the warranty will be void. The manufacturer/importer accepts no liability for damages caused by failure to follow the manual, a negligent use or use not in accordance with the requirements of this manual.
- Warning: Potential risk of injuries from misuse.
- Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.
- This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
- Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
- Children shall not play with the appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.
- Care shall be taken when handling the sharp cutting blades, emptying the bowl and during cleaning.
- Be careful if hot liquid is poured into this appliance as it can be ejected out of the appliance due to a sudden steaming.
- Before inserting the plug into the mains socket, please check that the voltage and frequency comply with the specifications on the rating label.
- If an extension cord is used it must be suited to the power consumption of the appliance, otherwise overheating of the extension cord and/or plug may occur. There is a potential risk of injuries from tripping over the extension cord. Be careful to avoid dangerous situations.
- Disconnect the mains plug from the socket when the appliance is not in use and before cleaning.
- Ensure that the mains cable is not hung over sharp edges and keep it away from hot objects and open flames.
- Do not immerse the appliance or the mains plug in water or other liquids. There is danger to life due to electric shock!
- To remove the plug from the plug socket, pull the plug. Do not pull the power cord.
- Do not touch the appliance if it falls into water. Remove the plug from its socket, turn off the appliance and send it to an authorized service center for repair.
- Do not plug or unplug the appliance from the electrical outlet with a wet hand.
- Never attempt to open the housing of the appliance, or to repair the appliance yourself. This could cause electric shock.
- Never leave the appliance unattended during use.
- This appliance is not designed for commercial use.
- Do not use the appliance for other than intended use.
- Do not wind the cord around the appliance and do not bend it.
- The use of accessory attachment not recommended by the appliance manufacturer may cause injuries.
- Do not allow children to use the blender without supervision.
- Regarding the instructions for cleaning the surfaces which come in contact with food, speed settings and operating times, please refer to the below paragraph of the manual.
FEATURES
- Cap
- Lid
- Jug
- Jug handle
- Blade assembly
- Motor base
- Control knob
- Base foot
Control knob setting
- P = Pulse
- 0 = Off
- 1 = Low speed
- 2 = High speed
When you firstly use this product, you may smell some peculiar smell. This is a normal phenomenon when the motor is used for the first time. This smell will disappear after a few uses.
HOW TO USE
Caution: Make sure the motor base is unplugged from the power source and the control knob is set at the position 0.
-
Place the jug onto the motor base. Rotate the jug clockwise to have it locked on the motor base. The jug must be placed as shown on the above picture. The blender will not work if the jug isn’t locked into the motor base properly.
-
Put the liquid and diced food into the jug (no more than 1.5 L). Never fill the jug with ingredients that exceed 70°C. The appliance is used for blending juice. If blending water, the maximum capacity cannot exceed 1.0L.
Cut food into small pieces (approx. 15x15x15mm); the proportion of the food and liquid is 2:3. -
Put the lid onto the jug. Turn the lid clockwise and make sure it is firmly locked onto the jug, otherwise the blender will not work.
-
Insert the cap into the middle of the lid.
-
Put the plug into the power outlet. Switch on the appliance by rotating the control knob to choose the speed 1, 2 or pulse function.
-
After use, rotate the control knob to the position 0 and remove the plug from the outlet.
Note:
- For quick or delicate blending tasks, turn the control knob to the position P and hold it for a few seconds. Operate several times until the consistence you want is obtained.
- For each use, the consecutive operation time should not exceed 3 minutes. At least 10 minutes of rest time are required between two continuous cycles. Let the appliance cool to room temperature before performing the next operation cycle.
- Never blend large pieces of solid food, frozen food and bones in the appliance as it may cause damage.
Tips:
- Pour liquid into the jug first, and then add solid food into it to achieve the best performance.
- Following tasks cannot be performed effectively, such as: beating egg whites, beating cream, making mashed potatoes, grounding meat, kneading dough, extracting juice from fruits or vegetables, etc.
Recipe (for reference) Banana shake:
- 2 bananas
- Approx. 2 tbsp. sugar (depending on the ripeness of the bananas and personal taste)
- ½ l milk
- 1 dash of lemon juice
Peel the bananas and liquidize them at level 2. Gradually add the milk, then the sugar and the lemon juice. Keep mixing everything until you have a smooth and uniform liquid. Serve the shake chilled.
Vanilla shake
- ¼ l milk
- 250 g vanilla ice cream
- 1½ tsp. sugar
Place the ingredients into the appliance. Mix everything at level 2 until the liquid has a smooth consistency.
Cappuccino shake
- 130 ml cold expresso (or a very strong coffee)
- 130 ml milk
- 30 g sugar
- 130 g vanilla ice cream
Add the expresso, milk and sugar. Mix everything together at level 2 until the sugar has dissolved. Finally, add the vanilla ice cream and then briefly mix everything together at level 1.
Tropical mix
- 125 ml pineapple juice
- 60 ml papaya juice
- 50 ml orange juice
- ½ small tin of peaches with juice
- Place all ingredients into the appliance and blend them together at level 2.
CLEANING AND MAINTENANCE
Caution:
- Handle the blade assembly with care as the blades are sharp!
- Only the jug, lid and cap can be cleaned in a dishwasher and the temperature setting of the dishwasher should never exceed 70°C.
- Never use any water or liquid more than 70°C to clean any detachable parts.
- Fill the jug half-full with water (< 70°C) and a little cleaning agent. Turn the control knob to position P for a few seconds.
- Remove the mains plug from the power outlet.
- Take off the jug from the motor base. Rinse the jug and dry it thoroughly.
- The jug base with the blade assembly can be rotated off from the jug for cleaning.
- Do not immerse the motor base in water or any other liquid. Use a humid cloth to clean the motor base and dry it thoroughly. Do not use abrasive cleaning materials.
- Disassemble the other parts after each use and wash them in soapy water (< 70°C). Then rinse with clean water (< 70°C) and dry thoroughly.
CAUTION
- Never use boiling liquids.
- Never run the blender empty or with solids only.
- To reduce the risk of injury, never operate the appliance without the lid and cap in place.
- Do not remove the jug from the motor base while the appliance is in operation.
- Do not use the appliance if blade assembly is bent or damaged.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50-60Hz
Power consumption: 500W
GUARANTEE AND CUSTOMER SERVICE
Before delivery our devices are subjected to rigorous quality control. If,
despite all care, damage has occurred during production or transportation,
please return the device to your dealer. In addition to statutory legal
rights, the purchaser has an option to claim under the terms of the following
guarantee:
For the purchased device we provide 2 years guarantee, commencing from the day
of sale. If you have a defective product, you can directly go back to the
point of purchase.
Defects which arise due to improper handling of the device and malfunctions
due to interventions and repairs by third parties or the fitting of non-
original parts are not covered by this guarantee. Always keep your receipt,
without the receipt you can’t claim any form of warranty. Damage caused by not
following the instruction manual, will lead to a void of warranty, if this
results in consequential damages then we will not be liable. Neither can we
hold responsible for material damage or personal injury caused by improper use
if the instruction manual is not properly executed. Damage to accessories does
not mean free replacement of the whole appliance. In such case please contact
our service department. Broken glass or breakage of plastic parts is always
subject to a charge. Defects to consumables or parts subjected to wearing, as
well as cleaning, maintenance or the replacement of said parts are not covered
by the warranty and are to be paid.
Electrical and electronic devices/ information for private households The
Directive 2012/19/EU on waste electrical and electronic equipment contains a
large number of requirements for handling electrical and electronic equipment.
The most important are compiled here.
-
Separate collection of waste electrical and electronic equipment
Electrical and electronic equipment that has become waste is referred to as waste electrical and electronic equipment (WEEE). Owners of WEEE must collect them separately from unsorted municipal waste. WEEE do not belong in household waste, but in special collection and return systems. -
Batteries, accumulators and lamps
Owners of WEEE must hand over them in complete condition. However, owners of WEEE have to separate old batteries and accumulators which are not enclosed by the WEEE, as well as lamps which can be removed, from the WEEE without destroying it before handing it over to a collection point. -
Ways to return the WEEE
Owners of WEEE from private households can hand them in free of charge at the designated collection points of the public waste disposal authorities or at the take-back points set up by manufacturers or distributors in terms of the Directive 2012/19/EU. -
Privacy Protection Notice
WEEE often contain sensitive personal data. This applies especially to information and telecommunications technology devices such as computers and smartphones. In your own interest, please note that each end user is responsible for deleting the data on the WEEE before disposing it. -
Potential environmental impact
WEEE contain substances that may have a negative impact on the environment and human health if their collection, hand-over, re-use or material recovery is not done in compliance with respective legislation. -
Your role in WEEE waste treatment
By fulfilling these obligations and especially by fulfilling the obligation to collect WEEE separately, not to dispose it together with unsorted municipal waste and to hand it over to at collection points, you as the end user contribute to the re-use and material recovery of WEEE. -
Meaning of the crossed-out dustbin symbol
The crossed-out dustbin, which is regularly displayed on electrical and electronic equipment, indicates that the respective device must be collected separately from unsorted municipal waste at the end of its life cycle.
Emerio B.V. Oudeweg 115 2031 CC Haarlem The Netherlands
Customer service:
T: +31 (0) 23 3034369 www.emerio.eu/service
Looking for spare parts? Have a look at
www.spareparts.emerio.eu