TITAN 6×6 Softwood Post Anchor Installation Guide
- June 9, 2024
- Titan
Table of Contents
6×6 Softwood Post Anchor
Installation Guide
6×6 Softwood Post Anchor
IMPORTANT NOTE
USE ONLY STAINLESS STEEL SCREWS WITH ALUMINUM DECKING. SOLD SEPARATELY.
THE INTERNATIONAL RESIDENTIAL CODE (IRC – USA)
AND THE NATIONAL BUILDING CODE OF CANADA (NBC – CANADA)
INSTALLING RESIDENTIAL GUARDS:
This product has been independantly tested according to established AC 273 procedures set out in the IRC for the USA and NBC for Canada. It can be used as a code compliant post anchoring component in one and two family residential guard rail applications when installed according to these directions and conditions of use.
MATERIALS:
Use SPF lumber for posts and double blocking between joists below each
post.Attach top rail to posts in
POST TO RAIL DETAIL – Aor B.
QUESTIONS? CONTACT US AT
1-866-577-8868
In no event shall Titan Building Products be liable for any loss or damage,
direct or otherwise, which results from the improper installation or use of
this product. If for any reason Titan Building Products becomes liable for
loss or damage, direct or otherwise, the aggregate liability of Titan Building
Products shall be limited to the retail purchase price of the products.
ATTENTIONS Berore BEGINNING WORK, CONSULT WITH LOCAL BUILDING OFFICIALS OR ENGAGE PROFESSIONALS TO ENSURE THAT THIS PRODUCT IS APPROPRIATE FOR YOUR INTENDED USE OR HELP CLARIFY IF THESE WARNINGS ARE UNCLEAR OR IF YOU DO NOT UNDERSTAND ANY OF THE INFORMATION IN THIS INSTALLATION GUIDE. ALWAYS COMPLY WITH APPLICABLE BUILDING CODES AND BE ADVISED THAT BUILDING CODES MAY VARY.
T 1-866-577-8868
www.titanbp.com