IKEA VÅRDA Stain For Wood User Manual

: June 16, 2024
: Ikea

Table of Contents

Product Information
Product Usage Instructions
Step 4: Maintenance
FAQ (Frequently Asked Questions)
CONTENTS
USER INSTRUCTIONS
HOW TO REACH US IF YOU NEED FURTHER
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Product Information

Specifications

Capacity: 500ml (16.93 fl.oz)
Duration: 24 hours
Composition: H2O

Description

The Protective Wood Stain is designed specifically for outdoor furniture. It provides a colorless finish, allowing the natural beauty of the wood to shine through. This stain is compliant with EU regulations and falls under category A/e, which sets a limit value of 130g VOC/l (2010). The maximum VOC content in this product is less than 130g VOC/l.

Product Usage Instructions

Step 1: Preparation

Before applying the protective wood stain, ensure that the surface of the outdoor furniture is clean and dry. Remove any dirt, dust, or previous coatings using a suitable wood cleaner or sandpaper.

Step 2: Application

Shake the product well before use to ensure proper mixing of the ingredients.
Apply a thin and even coat of the protective wood stain using a brush or roller. Make sure to follow the direction of the wood grain for best results.
Allow the first coat to dry completely according to the specified duration (24 hours).
If desired, apply additional coats for enhanced protection and durability, following the same application process.

Step 3: Finishing

Once all coats have dried, inspect the furniture surface for any unevenness or imperfections. If necessary, lightly sand the surface and remove any dust before applying a final coat.

Step 4: Maintenance

To maintain the protective qualities of the wood stain, periodically inspect the furniture and reapply a thin coat as needed. Clean the surface with a mild soap and water solution before reapplication.

FAQ (Frequently Asked Questions)

Q: Can this protective wood stain be used on all types of wood?

A: Yes, this stain is suitable for use on various types of wood commonly used in outdoor furniture, including teak, cedar, and pine.

Q: How long does it take for the protective wood stain to dry?

A: The drying time for each coat is approximately 24 hours. It is important to allow sufficient drying time before applying additional coats or using the furniture.

Q: Is it necessary to sand the furniture before applying this wood stain?

A: It is recommended to prepare the surface by sanding lightly to ensure better adhesion and a smoother finish. However, if the furniture is already in good condition, sanding may not be necessary.

Q: Can I use this wood stain indoors?

A: While this product is designed for outdoor furniture, it can also be used indoors as long as proper ventilation is ensured during application.

DRYING TIME: Wait 24 hours before using the furniture to allow the stain to dry thoroughly.
STORAGE : At temperatures not above +50ºC (+122ºF) or below 0ºC (+32ºF).
STORAGE LIFE: Unopened bottle, 2 years from production date on the bottom of the bottle. Opened bottle should be used within 6 months of first opening.

CAUTION
Keep out of the reach of children. Do not take it internally. Use in a well- ventilated area. In case of contact with eyes, rinse eyes with water. Consult a doctor if discomfort persists.

USER INSTRUCTIONS

You can easily refresh your wooden outdoor furniture and make it more durable by re-staining it on a regular basis, for example once a year. You may need to re-stain the furniture more frequently, depending on the climate you live in and the furniture’s exposure to sun and rain. Re-staining prevents the surface from drying out and cracking and moisture from penetrating into the wood.
For furniture that stands in the open air, a good indication that you need to re-stain is if raindrops are absorbed directly into the wood and no longer form small beads on the surface.

How to re-stain
Choose a place in the shade for cleaning, restaining, and leaving the furniture to dry. Avoid direct sunlight.

Wipe clean with a soft cloth dampened in water and a mild soapy solution, if necessary. Wipe dry with a clean and dry cloth.
Use a soft brush to remove tougher stains. If necessary, sand the surface with fine-grade sandpaper. Be sure to sand it in the direction of the grain. Do not use steel wool or a brush with metal bristles – pieces of metal may become embedded in the wood andrust. If wood fibres rise after cleaning, sand the surface with fine-grade sandpaper.
Shake the bottle well and apply a thin, even coat of stain to the furniture using a brush or sponge. Apply on the entire surface at once and in the direction of the grain.
Water-based stain dries quickly so be sure to wipe off any excess with a dry cloth directly after application.
Wash brushes and your hands with soap and water. EU limit value for this product (cat. A/e): 130 g VOC/l (2010). This product contains max. < 130 g VOC/l