Liya Intelligent LY-810 Electric Vehicle Instrument Panel User Manual
- June 16, 2024
- Liya Intelligent
Table of Contents
Liya Intelligent LY-810 Electric Vehicle Instrument Panel
Product Information
Specifications:
- Model: LY display 810
- Fault Status: E
- Wiring Mode:
- Red wire (D +): Positive input of power supply
- Black wire (GND): Negative pole of power supply
- Blue wire (DS): Controller switch lock
- Green line (Tx): Communication transmission
- Yellow line (RX): Communication reception
- Grenade Hall Signal Station
- Special Features: Bluetooth, NFC function, password boot
Product Usage Instructions
Fault Status Display:
The fault status is represented by the area E. When the symbol is flashing,
press the M/3 key to adjust the display interface to the E interface. The
corresponding number under the interface represents the corresponding fault
content.
NFC Function and Password Boot:
The meter has NFC function and password boot options. The background
settings for the instrument are as follows:
- 0 : No password required, NFC swipe card to boot up
- 1 : Only NFC card can be used to boot the computer
- 2 : Password and NFC swipe card can be used to boot
Background Setting 0:
To boot the instrument, simply press the power button briefly.
Background Setting 1:
When the background is set to 1, a letter N will appear above the
instrument when pressing the power on button. Swipe an NFC card in the
designated area with the word “NFC” to boot the machine.
Background Setting 2:
When the background is set to 2, a letter N will appear on the meter when
pressing the power on button. To boot using NFC, follow the same steps as in
background setting 1. If you choose to use a password to boot (default
password is 1234), enter the password by pressing the corresponding number
buttons on the meter. Note that the first digit of the password needs to be
long-pressed for more than 1 second before short-pressing the remaining
digits. The boot action must be completed within 5 seconds of short-pressing
the power button, otherwise, the instrument will automatically sleep and
require pressing the power on button again to wake up.
Bluetooth Connection and App Download:
To connect via Bluetooth and download the app:
Android Users:
Scan the provided QR code or search for the app in the Google Play Store
and download it.
iPhone Users:
Open the App Store and search for the app. Click on the Bluetooth icon to
search for the Bluetooth name connection starting with “LIVIAE”. Click the
Bluetooth icon to jump to the login interface.
Quick Login:
If you don’t want to register the binding, you can directly log in with the
shortcut. However, quick login does not allow access to the instrument
background for modifying parameters.
Registering and Binding:
To modify parameters and prevent abnormal vehicle operation, registration
and binding are required:
- Click on “Register Account” and enter the required information in the provided interface.
- After registering the information, it will jump to the login interface.
LY display 810manual
The fault status displays the area E, when the symbol is flashing, press
the M/3 key to adjust the display interface to the E interface, the
corresponding number under the interface represents the corresponding fault
content, the specific status is as follows
Fault Status Codes:
- E-001 : Motor Hall fault
- E-002: Handle failure
- E-003 : Controller failure
- E-004 : Brake failure
- E-005: Voltage fault
- E-006 : Communication Failure (Instrument Does Not Receive Controller Signal)
- E-007: Communication Failure (Controller Does Not Receive Instrument Signal)
Wiring Mode:
- Red wire (D +): Positive input of power supply
- Black wire (GND): Negative pole of power supply
- Blue wire (DS): Controller switch lock
- Green line (Tx): Communication transmission
- Yellow line (RX): Communication reception
- Grenade Hall Signal Station
Special note : The meter has Bluetooth, and has NFC function and password boot
N
This icon represents the NFC function)There are three options for P95 in the
background of the instrument: 0 means no password and NFC swipe card to boot
up, 1 means that only the NFC card can be used to boot the computer, and 2
means that the password and NFC swipe card can be turned on.
The specific use is as follows:
- When the background is set to 0, you only need to press the boot button briefly to boot and use
- When the background is set to 1, a letter N will appear above the instrument by pressing the power on button, which means that you want to swipe NFC to open the machine to turn on the phone, pay attention to the NFC card has a special card area, the meter has the word printed NFC, swipe the card in this area to boot the machine.
- When the background is set to 2, N will appear on the meter by pressing the power on button and .If you want to use NFC to boot the same as the operation steps of item 2, if you choose the password to boot (when the instrument P96 is set to 2 the default password is 1234), directly enter the password 1234 (when choosing the password to boot, the first digit needs to long press the number after more than 1 second short press can be) according to the number button on the meter corresponding to the number can be turned on, here to remember that whether it is to boot with a password or NFC card to boot must complete the boot action within 5 seconds of short press the boot button, otherwise the instrument will automatically sleep, You need to press the power on button again to wake up the meter.
- Bluetooth contact , downlaod APP
- Android users scan QR code and download. IPhone users directly search in the Iphone store
Open APP Will shows Click the Bluetooth icon to search for the Bluetooth name connection with the beginning of LIVIAE, and click the Bluetooth icon to jump to the login interface
If you don’t want to register the binding, you can directly log in with the
shortcut.
Quick login cannot enter the instrument background to modify parameters:
You need to register the binding to modify the parameters and prevent the vehicle from being abnormalized by misoperation.
How to register
- Click Register Account and enter the information according to the interface.
- After the information is registered, it will jump to the login interface and click Login.
- There will be this search Bluetooth interface, click on the name with LIVIAE at the beginning of the click, scan the code box, at this time directly scan the code or enter the barcode number and letter can be bound to enter the vehicle interface, the barcode is generally in the manual or the side of the instrument or the back of the instrument.
About NFC
- Generally, there are 3 cards left the factory, and the blue one is the main card. The white one is the secondary card.
- Blue main card: equivalent to the key is generally placed at home without a body, the main card can not play the role of booting, such as the white sub-card lost and you want to match the key is with a white sub-card, at this time you need a blue main card to match this key, equivalent to the blue main card is the master, the white sub-card for the guest, the guest wants to enter the door need the owner’s consent.
- Here explains how to use the blue main card, the premise P96 must be set to 1 or 2, short press the boot button (within 5 seconds) to swipe the blue main card in the
NFC card area, at this time the number 1 will appear on the meter, when 1 appears to swipe the first white card, appear 2 to swipe the second card, when there is 3 you do not have the third white card casually in the swipe of a white card is completed, at this time the instrument will automatically shut down, each time the card will have a drop. Press the power on button to swipe the white card to turn on. Short press the No. 1 button to turn it on, and long press the No. 1 button to shut down.
Press button 3 and button 5 at the same time to enter the background function layout:
- P01: Backlight brightness, 1-10
- P02: Mileage unit, 0:km 1:mile, 2:km mile full display
- P03: Voltage level, 24V 36V 48V 52V 60V 72V
- P04: sleep time, 0: no sleep Other numbers are sleep time, range: 1-60; Units in minutes
- P06: Wheel: unit, inch; Accuracy: 0.1
- P07: Measuring the number of magnets; Range: 1-100
- P09: Zero start, non-zero boot setting, 0: zero start; 1: Non-zero boot
- P10: Drive mode setting 0 assist drive; 1 Electric drive; 2 Power drive Electric drives coexist
- P11: Assist sensitivity setting 1-24
- P12: Starting torque: range: 0-5, 0 weakest, 5 strongest
- P13: Booster plate magnet type setting 5. 8. 12
- P15: Motor drive signal percentage setting is set to 100% full speed
- P16: Instrument real-time cruise function: 0: No function 1: There is this function
- P19: Taillight setting, 0: Taillight is always on 1: Taillight is synchronized with headlights
- P20: Boot Settings: 0: Soft Boot 1: Normal Boot (50%) 2: Hard Boot (100%)
- P21: Electronic brake strength: 0: none, 1 Yes (class 1-10)
- P92: Handle Hall setting: 0; No rotary handlebar function, 1: There is a rotary handle function
- P93: Change password: Press the number 3 button to change the password
- P95: Boot mode: 0: No password / No NFC 1: There is NFC (Note: You can only boot with NFC. Pressing the boot button has no effect), 2: There is a password (4-digit password default 1234) / NFC
- P96: Speed limit 40km setting: 0; The speed limit of 40km can not be canceled directly, 1; long press No. 3 to enter the speed limit of 40km/h can lift the speed limit of 40km, 2: long press the No. 3 button can enter the speed limit of 40km/h can not be lifted, need to shut down in the boot to lift.
- P97: Drive icon setting: 0 No this function (can not switch single and dual drives), 1: With this function (can switch single and dual drives); 2: The default is dual drive
- P98: One-click start: 0: No this feature, 1 has this featureP99: One-key recovery (under the
- P99 parameter setting interface, long press the number 3 key for 5-6 seconds, all parameters are restored to the initial parameters of the instrument) ODO: odo zero clearing (under the ODO parameter interface, first briefly press the No. 3 button, and press and hold the No. 3 button for 5-6 seconds until the digital clearance is released)
Operation Instructions
Set passport
First of all, the factory with the default password (1234), elaborate: how to set the password into the background to select P95, here is an example to illustrate the choice 2, when we P95choose 2 when the P93 function is turned on, and will produce an initial password 1234, let’s talk about changing the password, when the password is set successfully want to change the password, adjust the parameters to P93 to see the factory password 1234, short press the No. 3 button, this time the main interface icon Start to light up and stay on, icon The number began to flash 4 horizontal bars, at this time enter the 4-digit password you want to decide, short press the number 3 button number number does not flash the icon It means that the password has been set successfully, and so on if it needs to be changed again. When the P95 selects with password/NFC, every time the instrument is restarted, press the No. 1 button, and only this icon will appear on the main interface of the boot screen And the number becomes 4 horizontal bars, and the user needs to enter the correct password to restore the main interface (you need to press and hold when entering the first number, and the subsequent numbers do not need to) or directly use the NFC card to swipe the machine, the two coexist, which one is used first.
How to turn on
- This is the icon that represents each different start mode, the factory default is ECO PRO for soft start energy-saving mode, you can set the default boot mode through the background, enter the background to select P20 to adjust 0 on behalf of ECO PRO, 1 represents COMFORT, 2 represents SPORT, during the driving process can be short press the No. 2 button to switch various starting methods respectively, No. 2 key is cyclic work, background P20 as the default boot choice.
- The specified time of short press of the key is 0.3 seconds, and the specified time of the long press of the key is 2 seconds.
Note : Due to the upgrade of the company’s products.The display information of the products you get may be different from the manual.It will not affect your normal use.
ADD : No. 3, Qingyun Road, Niutang Town, Wujin District, Changzhou City, Jiangsu Province
FCC Warnning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuan t to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterferenc e to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or reloca te the receiving antenna.
- Increase the separation between the equi pment and receiver.
- Connect the equipment into an outlet on a circuit different f rom that to which the receiver is c onnected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
FAQ’s
How do I connect the meter to power supply and controller?
Follow the specified wiring mode mentioned in the user manual:
- Connect the red wire (D +) to the positive input of the power supply.
- Connect the black wire (GND) to the negative pole of the power supply.
- Connect the blue wire (DS) to the controller switch lock.
- Connect the green line (Tx) for communication transmission.
- Connect the yellow line (RX) for communication reception.
- Connect the Grenade Hall Signal Station.
Can I use a password to boot the instrument?
Yes, if the background setting is set to 2, you can use a password to boot the instrument. The default password is 1234. Enter the password by pressing the corresponding number buttons on the meter. Note the specific instructions mentioned in the user manual for entering the password.
How can I download the app and connect via Bluetooth?
Why do I need to register and bind?
Registering and binding are necessary to modify parameters and prevent abnormal vehicle operation due to misoperation. By registering and binding, you gain access to the instrument background for parameter modification.
How do I know the specific fault content?
The fault content is represented by the corresponding number under the E interface. Refer to the fault status codes section for specific fault descriptions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>