Vancer 2A8S4-GEMINI Castor Mouse Instruction Manual

June 16, 2024
Vancer

Gemini Castor

Vancer 2A8S4-GEMINI Castor Mouse

2A8S4-GEMINI Castor Mouse

Vancer 2A8S4-GEMINI Castor Mouse - Part 1

(1) Left button
(2) Right button
(3) Middle button
(4) Side button4| (5) Side button 5
(6) DP1button/Led
(7) Report switch
(8) Power switch
---|---

Vancer 2A8S4-GEMINI Castor Mouse - Part 2

Low battery: Red light flashing
Charging: Yellow light flashing
Fully charged: The light turns green

Vancer 2A8S4-GEMINI Castor Mouse - Part 3

Vancer 2A8S4-GEMINI Castor Mouse - Part 4

Environment

The distance between the router and the usb extender should be more than 2M to avoid interferance and the USB extender should be within 20-400m.

Charging

The charging voltage should not be more than 5V(1 A) to ensure the Li-Battery durability, please use the provided data cable to charge from the PC.

Vancer 2A8S4-GEMINI Castor Mouse - Charging

Vancer 2A8S4-GEMINI Castor Mouse - Part 6

More details on www.vancer.gg

FCC Compliance Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a  residential installation. This equipment generates, uses instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment  does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals