Miele M.-Nr. 12 506 420 Dishwasher User Guide

Miele M.-Nr. 12 506 420 Dishwasher

Product Information

The product is a fully integrated dishwasher designed for efficient and convenient dishwashing. It comes with various installation fittings depending on the model. The minimum/maximum weight of the front panel can be found in the technical data provided on the Miele website. The door springs need to be set equally on both sides after fitting the front panel to the door. Venting the water drain is required if the on-site drainage connection is situated lower than the guide path for the lower basket rollers in the open door.

Specifications

• Model Number: M.-Nr. 12 506 420 / 00
• Weight: Varies depending on the model
• Dimensions: 535mm (width) x 550mm (depth) x 577mm (height)

Product Usage Instructions

Installation

1. Before installation, carefully read the operating instruction manual provided with the dishwasher.
2. Refer to the installation drawings specific to your model for proper installation.
3. Ensure that all necessary fittings and accessories are included and compatible with your model.
4. If required, vent the water drain if the on-site drainage connection is lower than the guide path for the lower basket rollers in the open door.

Setting up the Front Panel

1. Attach the front panel to the door of the dishwasher using the provided fittings.
2. Set the door springs equally on both sides to ensure proper functioning.
3. Refer to the technical data on the Miele website for the minimum/maximum weight of the front panel.

Usage

1. Load the dishwasher with dirty dishes, making sure not to exceed the recommended capacity.
2. Add the appropriate amount of dishwasher detergent to the detergent dispenser.
3. Select the desired wash cycle and any additional options, such as temperature or delay start.
4. Close the dishwasher door and start the wash cycle.
5. After the cycle is complete, unload the clean dishes and allow them to dry.

FAQ

Q: What should I do if the front panel is too heavy for my dishwasher model?

A: Refer to the technical data on the Miele website to ensure that the weight of the front panel is within the recommended range. If it exceeds the maximum weight, consider using a lighter material or contacting Miele for further assistance.

Q: Can I install the dishwasher myself?

A: While it is possible to install the dishwasher yourself, it is recommended to hire a professional for proper installation to avoid any accidents or damage to the appliance.

Q: How often should I clean the dishwasher?

A: It is recommended to clean the dishwasher at least once a month or as needed. Follow the instructions in the operating manual for proper cleaning procedures.

Installation drawings for fully integrated dishwashers

To avoid the risk of accidents or damage to the dishwasher please observe this installation sheet and read the operating instruction manual supplied with it before it is installed or used for the first time.

• See operating instruction manual.
• Risk of damage or fire hazard.
• Check connection data.
• Do not use a cordless screwdriver, risk of damage.
• Warning: Danger of being cut.
• The minimum/maximum weight of the front panel is quoted in the technical data for your dishwasher on the Miele website.
• The door springs must be set equally on both sides after fitting the front panel to the door.
• Screw the feet in before moving the dishwasher.

Fittings supplied depend on model

Tools required depend on model

Optional accessories Accessoires en option

Venting the water drain

If the on-site drainage connection is situated lower than the guide path for the lower basket rollers in the open door, the drainage system must be vented.

Installation Instruction

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>