VORNADO OSCR37 Oscillating Tower Fan and Air Circulator with Remote Owner’s Manual

VORNADO OSCR37 Oscillating Tower Fan and Air Circulator with Remote

Product Information

Specifications

• Model: OSCR37 Tower Circulator
• Intended Use: Circulate air in indoor living spaces
• Country of Use: United States
• Usage: Floor use only

Product Usage Instructions

Intended Use
This product is designed to circulate the air in indoor living spaces within the United States. It is intended for floor use only and not for commercial or industrial purposes. Unauthorized use or modification of the product may void the warranty.

Installation
When installing the product, follow these guidelines to reduce the risk of fire, electrical shock, and injury:

• Keep the product away from curtains, draperies, tablecloths, and other fabrics to prevent them from being drawn into the product, which can cause damage or fire.
• Avoid opening the appliance housing while it is plugged in.

Supervision and Safety
Supervision is required when using, cleaning, and maintaining this product around children aged 12 years and younger, as well as individuals with reduced physical, sensory, or mental capabilities. Ensure that children do not play with the appliance, its parts, or packaging material.

Servicing and Cleaning
To reduce the risk of fire, electrical shock, and injury during servicing and cleaning:

• Clean the product regularly following the instructions provided in the manual.
• Before cleaning, turn off the power and unplug the product.
• Do not use gasoline, thinners, solvents, ammonia, or other chemicals for cleaning. Refer to the cleaning instructions provided.

User Servicing Instructions

1. Using the product controls, turn off the appliance.
2. Grasp the plug (not the cord) and disconnect it from the outlet.
3. Replace the fuse only with a 2.5 Amp, 125 Volt fuse as specified.
4. If the product is damaged, it should be discarded or returned to an authorized service facility for examination and/or repair.

FAQ (Frequently Asked Questions)

• Q: Can I use this product for commercial or industrial purposes?
  A: No, this product is intended for floor use only in indoor living spaces. It is not designed for commercial or industrial use.

• Q: Can children play with the appliance?
  A: No, children should be supervised to ensure they do not play with the appliance, its parts, or packaging material.

• Q: How should I clean the product?
  A: Clean the product regularly following the cleaning instructions provided in the manual. Do not use gasoline, thinners, solvents, ammonia, or other chemicals for cleaning.

• Q: What should I do if the product is damaged?
  A: If the product is damaged, it should be discarded or returned to an authorized service facility for examination and/or repair.

READ AND SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

This owner’s guide and any additional inserts are considered part of the product. They contain important information about safety, use and disposal. Before using the product, please familiarize yourself with all operating and safety instructions. Please keep all documents for future reference and pass these documents on, together with the product, to any future owner. See www.vornado.com/circulators-manuals to view, download and print the most current version of these instructions.

• INTENDED USE:
  This product is intended to circulate the air in indoor living spaces only in the United States. This product is intended for floor use only. This product is not intended for commercial or industrial use. The manufacturer assumes no responsibility for damage or injury due to unauthorized use or product modification. Failure to follow these directions will void the product warranty.

• WARNING: Risk to Children and Impaired Persons
  Supervision is required during the installation, operation, cleaning and maintenance of this product by children 12 years of age and younger and anyone with reduced physical, sensory or mental capabilities. Children should be supervised to ensure that they do not play with the appliance, its parts and packaging material.

INSTALLATION WARNING—To reduce the risk of fire, electrical shock and injury to persons, observe the following:

• Place this product away from curtains, draperies, tablecloths and other fabrics, since they may be drawn into the product, damage the motor and/or cause a fire.
• No part of this product (the appliance, power cord, plug, packaging, etc.) should be placed near furnaces, fireplaces, stoves or other high-temperature heat sources. Do not use this product in a window, on an uneven or unstable surface, or near water.
• The appliance, power supply, power cord and plug cannot come into contact with water. Do not use this product on wet surfaces. Do not use this product in a bathtub or shower or position product where it may fall into a bathtub, laundry, swimming pool or other water container. Do not use this product outdoors or expose it to weather or elements.
• Do not run the cord under the carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Do not route the cord under furniture or appliances. Arrange the cord away from the traffic area so that it will not be tripped over. The cord should not hang over the edges of counters or be placed where it can be crimped or closed indoors. Place the appliance near an easily accessible outlet so the product can be unplugged quickly during an emergency.

SAFE USE WARNING—To reduce the risk of fire, electrical shock and injury to persons, observe the following:

• WARNING: To reduce the likelihood of circuit overload, fire and electric shock, do not operate with a solid-state speed device, such as a dimmer control switch.
• Do not operate any fan with a damaged cord or plug. Discard the fan or return it to an authorized service facility for examination and/or repair.
• Do not operate the unit if the unit has been dropped or damaged. Do not use this product if it has a damaged power cord or plug. To avoid the risk of electrical shock, do not attempt to repair or replace parts. Only original replacement parts may be used. If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard. Contact Vornado Consumer Service at 1-800-234-0604 (phone) or consumerservice@vornado.com (email) for further instructions about replacement and repair.
• Before plugging a power cord into an electrical outlet, be sure that all electrical information on the rating label, including voltage, is compatible with your outlet’s power supply.
• Do not sit or stand on the product.
• Never use the cord as a handle or otherwise yank, strain or stretch the power cord.
• While the product is plugged in, do not insert or allow foreign objects to enter any input or output opening as this may cause a risk of electric shock or fire, or damage the product.
• A loose fit between the wall outlet (receptacle) and the plug may cause overheating and distortion of the plug. Discontinue use of the product in this outlet. Contact a qualified electrician to replace loose or worn outlets.
• This appliance has a polarized plug (one blade is wider than the other.) To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
• Before moving, repositioning, servicing, cleaning and when not in use, use the product controls to turn off the power and then unplug. To disconnect from the outlet, grasp and pull only the plug. Also, power off and unplug if the product will be left unattended for an extended time or during electrical storms.

SERVICING WARNING—To reduce the risk of fire, electrical shock and injury to persons, observe the following:

• Clean your product regularly, only as instructed in this manual. Before cleaning, turn off the power on your product and unplug it. Do not use gasoline, thinners, solvents, ammonia or other chemicals for cleaning. Refer to the CLEANING instructions provided.
• Do not open appliance housing while the product is plugged in. To avoid the risk of shock, all service and/or repairs must be done by a Vornado Authorized Service Center.
• This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit may be present and the product should be discarded or returned to an authorized service facility for examination and/or repair.

User Servicing Instructions

1. Using the product controls, turn off the appliance.
2. Grasp the plug (not the cord) and disconnect from the outlet.
3. Risk of Fire. Replace fuse only with 2.5 Amp, 125 Volt fuse as approved by Vornado Consumer Service. For an authorized replacement fuse, please contact Vornado Consumer Service.
4. Once the replacement is received, use a small flat-head screwdriver to slide open the fuse cover (located on the plug)(See Fig. A).
5. Remove the fuse by using the screwdriver to gently lift each end of the fuse (See Fig. B).
6. Install the replacement fuse by using the screwdriver to gently push each metal end of the fuse into the receptacle one at a time. Do not push on the centre of the fuse—it is fragile and may break.
7. Slide the fuse cover closed using the screwdriver. When closed, the cover should fit completely in the plug. No part of the cover should stick out (See Fig. C).
8. Plug your appliance into the outlet and turn the power on.
9. If the replacement fuse blows, a short-circuit may be present and the product should be discarded or returned to an authorized service facility for examination and/or repair.

Risk of fire. Do not replace the attachment plug. Contains a safety device (fuse, AFCI, LCDI) that should not be removed. Discard the product if the attachment plug is damaged.

FCC Compliance Statement

NOTE:
This equipment has been tested and complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the product and the receiver.
• Connect the product to an outlet on a circuit different from that to which the receiver is connected.
• Contact Vornado Consumer Service or dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Supplier’s FCC Declaration of Conformity

• Unique Identifier: Vornado Model OSCR37
• Responsible Party: Vornado Air LLC
• Mailing Address: 415 E. 13th St., Andover, KS 67002
• Contact: www.vornado.com.

WARNING:
Batteries may pose a choking hazard. Do not let children handle batteries

BATTERY DISPOSAL:
Please dispose of batteries according to the local laws and regulations of your region, and while keeping them away from children. Some batteries may be recycled and accepted for disposal at your local recycling centre. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK. New and used batteries may cause injury. Keep new and used cells (or batteries) away from children.

WARNING:
Chemical burn hazard. Keep batteries away from children.

WARNING: KEEP NEW AND USED BATTERIES AWAY FROM CHILDREN.
This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. In the US call the National Poison Control Center at 1-800-222-1222 or 202-625-3333.

SAVE THESE INSTRUCTIONS

FEATURES

GETTING STARTED

BASE ASSEMBLY Screwdriver required.

1. Assemble the two base halves, pressing the two halves together until flush. You should hear a slight click when fully connected.
2. Assemble the base to the bottom of the tower. There is an alignment pin (A) located on the bottom of the tower and an alignment recess (B) located on the base. An arrow on the bottom of the base indicates the alignment recess location. To ensure correct assembly, position the base onto the bottom of the tower with (A) and (B) aligned. Take care that the power cord is routed through the hole on the base before moving to the next step in assembly.
3. Attach the base to the tower using 8 screws provided.
4. Route the power cord through the cord path located on the bottom of the base.

WARNING
Choking hazard. Keep small parts, like screws and feet, away from children and pets.

HOW TO USE

Before use, check the appliance for visible damage. DO NOT USE THIS TOWER if there is evidence of damage. If any damage is found, contact Vornado Air LLC at 1-800-234-0604.

1. Touch to power on.

2. Select the desired speed by pressing . Speed is indicated by number of lights illuminated:

3. Press to activate the timer. The Indicator Lights will turn orange to indicate timer adjustment mode. While in this mode, select the amount of time in three-hour intervals by pressing . After a few seconds, the flashing orange Indicator Lights will turn white, indicating you have left timer adjustment mode.
   They will continue to glow orange to indicate the timer is set.

4. To adjust the timer setting, press .

5. To cancel the timer, cycle through the timer settings until off. You can also press and hold for 4 seconds. The indicator lights will flash, indicating the timer is off. When the timer is off, the will no longer glow orange.

6. Press ( ) to turn Oscillation on and off.

NOTE:
Your tower fan is equipped with a photodetector sensor. The brightness of the control display will automatically adjust based on the amount of light detected in the room.

REMOTE CONTROL

REMOTE FUNCTIONS

1. Press to power on.
2. Select the desired speed setting by pressing the -/+ button.
3. Press to activate the timer.
4. To adjust the timer setting, press .
5. To cancel the timer, cycle through the timer settings until off.
6. Press ( ) to turn Oscillation on and off.

Note:
The remote requires a line-of-sight path to allow for the signal to be received by the tower. Position the tower so the receiver lens (located at the top of the product) is visible from the remote control.

BATTERY REPLACEMENT

Your tower circulator remote includes (1) coin-style 3V CR2032 battery. The battery comes pre-installed. Remove the battery pull tab before first use. The pre-installed battery has a 1-year life expectancy (dependent on usage) after the tab has been pulled from the remote.

1. For battery replacement, the remote requires one coin-style 3V CR2032 battery. Always use the correct size and grade of battery for this product.
2. To replace the battery, open the battery door on the back side of the remote control (you will need to loosen the small screw-on door using a #1 Phillips screwdriver). If necessary, clean the battery contacts and also those of the device before battery installation. Remove any plastic protection from the battery and place it in the remote with the + side facing out. Ensure the battery is installed correctly concerning polarity. Replace the battery door and screw.

Note:
Remove the battery from the remote control when not in use for an extended period and always remove the dead battery immediately and replace it with fresh. Do not store dead battery in the remote.

WARNING:
This product contains a button battery. If swallowed, it could cause severe injury or death in just 2 hours. Seek medical attention immediately.

CLEANING

Because your tower moves a substantial amount of air, it will need regular cleaning. If service is required, return your tower to Vornado (see WARRANTY for instructions).

WARNING:
To reduce the risk of electrical shock and injury to persons, unplug the tower before cleaning.

REGULAR CLEANING

1. Unplug the tower before cleaning.
2. Use the brush attachment on your household vacuum cleaner to vacuum any accumulated dust off the tower.
3. Wipe down the entire tower with a soft cloth.

Note:
Do not use gasoline, thinners, solvents or other chemicals for cleaning. The motor is permanently lubricated and requires no oiling.

TROUBLESHOOTING

PROBLEM

|

POSSIBLE CAUSE AND SOLUTION

---|---
The unit fails to power on.| The unit is not plugged in. Plug the Power Cord into an electrical outlet.

The unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance.

The fuse needs to be replaced. See IMPORTANT SAFETY INSTRUCTIONS for how to replace the fuse or

contact Consumer Service.

The unit is not producing a sufficient amount of air.| Ensure the unit is set to the highest setting for maximum air circulation.

Allow the unit to fully circulate the air throughout the room, this may take several minutes. Ensure all air inlets and outlet grills are unobstructed.

Remote Control is not working.| The battery is dead. Replace with new 3-volt CR2032 battery. Refer to REMOTE CONTROL – Battery

Replacement for instructions.

The remote requires a line-of-sight path to allow for the signal to be received by the unit. Position the unit so the receiver lens (located at the top of the product) is visible from the remote control.

WARRANTY

We expect this product to be perfect. If you’re not satisfied with this product, let us know.

Vornado Air LLC (“Vornado”) warrants to the original consumer or purchaser that this Vornado® Whole Room Circulator (“Product”) is free from defects in material or workmanship for five (5) years from the date of purchase. If any such defect is discovered within the warranty period, Vornado, at its discretion, will repair or replace the Product at no cost.

For warranty service: Call 1-800-234-0604 or email help@vornado.com to obtain a Return Authorization (“RA”). Please have or include your Product’s model number and serial number, as well as your name, address, city, state, zip code, e-mail, and phone number when contacting Vornado for warranty service. To file a contactless warranty claim, visit vornado.com/contact-us. After receiving the RA form, ship your Product to Vornado Air LLC Attn: Warranty & Repair 415 East 13th Street Andover, KS 67002. For your convenience, please have your model number and serial number when contacting Vornado with service inquiries. To ensure proper handling, packages must be marked with the RA number. Packages not marked with the RA number may be refused at the receiving dock. Please allow 1-2 weeks for repair and return of your Product after the Product is received.

Repairs not covered by the warranty or outside the warranty period will require a fee to cover the cost of materials, labour, handling and shipping. This warranty does not apply to defects resulting from abuse of the Product, modification, alteration, mishandling, improper maintenance, commercial use or repair or service of the Product by anyone other than Vornado; damages which occur in shipment or are attributed to acts of God. Improper product use, which includes using an external device that alters or converts the voltage or frequency of electricity, or shipping a Vornado product to a country not intended for use will void all warranties. Any unauthorized product modification, repair by an unauthorized repair centre, or use of non-approved replacement parts is not recommended and any consequences will not be covered by support services or product warranties. The product warranty will be honoured only on models that are being used in the country intended. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. VORNADO SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary from state to state. The manufacturer assumes no responsibility for damage caused by failure to follow these instructions or improper product use. Any such actions will invalidate the product warranty.

All company names and product names are trademarks of their respective owners. © All rights reserved. All technical information, data, and instructions for the installation, connection, and operation contained in these instructions for use correspond to the latest available information at the time of printing. The contents of this manual may differ slightly from the actual product. Observe any additional supplements.

© 2023 Vornado Air LLC Andover, KS 67002 Specifications are subject to change without notice. Vornado® is a trademark owned by Vornado Air LLC.

Vornado Air, LLC
415 East 13th Street, Andover, Kansas 67002 800.234.0604 | vornado.com.

References

• Home - Vornado
• Contact Us - Vornado
• Home - Vornado
• Circulator Manuals - Vornado

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>