CONSTANTSINO CS-A103 UFO Smart Alarm Clock Instruction Manual
- June 16, 2024
- CONSTANTSINO
Table of Contents
UFO SMART ALARM CLOCK
INSTRUCTION MANUAL
Please read through manual before using the product and keep the manual for
future use
CS-A103 UFO Smart Alarm Clock
Dear Customer :
Thank you very much for purchase and using our company’s products. Before you
use this product for the first time, please read the user manual carefully. It
will help you use the product quickly and correctly. We hope that our product
can bring you a more convenient service experience. Our goal is to
continuously improve and improve our company’s products. Therefore, the
product you use may differ slightly from the manual. If there are minor
changes, we may not be able to notify you in a timely . We apologize for any
inconvenience caused! If you have any questions, please contact our after-
sales service department in a timely , and we will definitely give you a
satisfactory answer. Before initial use, charge the product first; If the
battery level decreases, the display brightness will decrease!
Product parameter
Product Name: Flying saucer shape Bluetooth Speaker with with alarm clock
function
Model Name： CS-A103
Product Size: 110110105(mm)
Product Weight: 220g
Button Battery: CR2032-230mAh
Recharge battery: 18650 Li-3.7Vdc
Battery Capacity: 2400mAh
Input Voltage: DC-5V-2A
Material: ABS+PC+Silicone
Executive standard: GB4706.1-2005
How to Use
-
Power on Display and Function
1.1 Power on with switch, Sount BiBi twice and enter time display interface, when in 12H mode, LED P is on and mean afternoon time, when in 24H mode, LED P is off.
1.2 Power on first time, It’s Voice control and power save mode default .LED display will be off while no button pushed in 15S at Time Dispaly interface, and LED dispaly will be on while there is Voice control Vibration.
1.3 Short press the voice control button to turn on or off voice control fucntion at Time Display interface and Night Light is off.as following pic. showing, LED will be on while voice control is off
1.4 Press LED button to change brightness
of LED with 3 levels at Time Dispaly interface1.5 Long press LED button 2S to
turn on/off Night Light. Short press middle LED button to switch color as
following: white → red → yellow → green → cyan → blue → purple → atmosphere
light, with a seven color cycle.
1.6 Short press +/- button at Time Display interface while Night Light is on to adjust the brightness of Night Light L30-L01 level up or down Long press 2S to quickly adjust -
Time Display Operation and Function
2.1 Normal time dispaly, showing as following pic.
2.2 Time display mode, short press SET
button to switch as following :
Time → Date → Learning alarm clock → Waking alarm clock → Sleep alarm clock .
2.3 It’s will return Time Display while
there is no operation in 15S at Non Time Display Mode.
2.4 Time set: Long press Set button 2S enter SET mode , Short press Set button to switch as following : 24/12H → Hour → Minute → Year → Month → Day → Exit; Short press +/- button to adjust related SET, Long press to quickly adjust.
2.5 The Second reset to zero automatic while SET Minute; It’s will exit SET while no operation in 15S; Long press SET button 2s to exit SET function. -
Leran alarm operation and Funciton
3.1 Long press SET enter Learn alarm SET at Learn alarm interface, Short press SET button to swich as following: Learn alarm clock hour → Learn alarm clock minute → Learn alarm clock sound selection → Alarm clock on/off on weekends → Exit; Short press +/- button to adjust related SET, Long press 2S to quickly adjust; Exit while No operation for 15S or Long press SET 2S.
3.2 Short press + button to turn on /off Learn Alarm at Learn Alarm interface; Turn on Learn Alarm automatically while enter Learn Alarm SET mode, and Set Learn Alarm Weekend on/off state , showing as following pic. :
3.3 Learn Alarm sound: The learn alarm
music will turn on automatically and Red night light is on while alarm clock
time is up, the learn alarm icon will flash at a frequency of 1Hz, and sound
for 1 minute. The alarm will stop while no button pressed for 1 minute.
Red night light is off and learn alarm icon showing while alarm stop.
3.4 Cancel Alarm : The sound will be stop while any button pressed and button function is not used except Sleepiness button.
3.5 Sleepiness mode: Short press LED button enter Sleepiness mode, Red night light is off , Sleepiness icon flash at a frequency of 1Hz; Sleepiness time is 5 minutes; Short press any button to exit Sleepiness mode and button function is not used -
Wake up alarm operation and function
4.1 Long press SET button 2S to enter Wake up Alarm SET at Wake up alarm interface, Short press SET button to switch as following: wake-up alarm hour → wake-up alarm minute → wake-up alarm sound selection → alarm clock on/off on weekends → exit; Short press +/- button to adjust related SET, Long press 2S to quickly adjust; Exit while
No operation for 15S or Long press SET 2S.
4.2 Short press + button to turn on /off Wake up Alarm at Wake up Alarm interface ; Turn on Wake up Alarm automatically while enter Wake up Alarm SET mode, and Set Wake up Alarm Weekend on/off state , showing as following pic. :
4.3 Wake up Alarm sound: The Wake up alarm
music will turn on automatically and Yellow night light is on while Wake up
clock time is up, the Wake up alarm icon will flash at a frequency of 1Hz, and
sound for 1 minute. The alarm will stop while no button pressed for 1 minute.
Yellow night light is off and Wake up alarm icon showing while alarm stop.
4.4 Cancel Alarm : The sound will be stop while any button pressed and button fucntion is not used except Sleepiness button.
4.5 Sleepiness mode: Short press LED button enter Sleepiness mode, Yellow night light is off , Sleepiness icon flash at a frequency of 1Hz; Sleepiness time is 5 minutes; Short press any button to exit Sleepiness mode and button functioni is not used. -
Sleep Alarm operation and function
5、 Sleep alarm mode operation and function description:
5.1 In the sleep alarm display mode interface, long press the LED key for 2 seconds to enter the sleep alarm setting. Short press the LED key to switch settings, in order: sleep alarm hour → sleep alarm minute → sleep alarm sound selection → alarm weekend on/off → exit; Short press the+/- keys to adjust the settings up/down, and long press for 2 seconds to quickly adjust up/down; 15 seconds without button operation to exit the setting; Press and hold the setting button for 2 seconds to exit the setting.
5.2 Sleep alarm display interface, short press the [UP] key to switch on and off the sleep alarm; Entering the sleep alarm setting automatically turns on the sleep alarm.
In the sleep alarm setting state, you can set the weekend on/off state of the sleep alarm, as shown in the following figure:
5.3 Sleep alarm clock sounds: When the
alarm time arrives, sleep music will automatically start, and the sleep alarm
icon will flash at a frequency of 1Hz; Noise duration: 1 minute.
5.4 Cancel the alarm: 1 minute without button operation, stop the alarm, and the sleep alarm icon will always be displayed; There is a button operation that stops ringing and does not execute the button function.
5.5 Greedy sleep function: When there is an alarm, briefly press the LED light button to enter the greedy sleep mode, and the greedy sleep icon flashes at a frequency of 1Hz; Sleeping for 5 minutes.
Warning:
When charging this product, please use a adapter with an output voltage :
5V-2A DC and use the standard USB charging cable. When abnormal situations
occur during the use of the product, please immediately stop using it. This
product has a built-in rechargeable battery, which is not washable, can’t be
heavily pressed, and can’t be near high temperature hazards. This product
can’t be disassembled or repaired .
FCC Warning Statement: Changes or modifications to this unit not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment. This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>