Conceptronic CFUNCAM Webcam Installation Guide

Conceptronic CFUNCAM Webcam

CFUNCAM Quick Installation Guide

Congratulations on the purchase of your Conceptronic Funcam.

• The enclosed Hardware Installation Guide gives you a step-by-step explanation of how to install the Conceptronic Funcam.
• When problems occur, we advise you to go to our support site (go to www.conceptronic.net and click ‘Support’. Here you will find the Frequently Asked Questions Database.
• When you have other questions about your product and you cannot find it on our website, then contact us by e-mail: support@conceptronic.net
• For more information about Conceptronic products, please visit the Conceptronic Web Site: www.conceptronic.net
• The Software installation as described below, may be slightly different from the installation on your computer. This depends on the Windows version you are using.

This box contains

• 1 Conceptronic Funcam
• 1 Camera Clip + desktop foot
• 1 CD Containing Funcam Driver & VP-EYE 4.0
• This Quick Installation Guide

Contact your supplier if any items are missing

Specifications

Computer Requirements

• CD-ROM Drive
• One (free) USB port
• Operating Systems: Windows 98SE/ 2000/ Me and XP
• RAM Memory: 64MB or above

Driver Installation

Please do not insert the Funcam PC Camera into the USB port before completing the driver installation

Please make sure that you have Windows 98SE/ 2000/ Me or XP running and working, before attempting to install the Funcam camera driver.

1. Insert the Funcam PC Camera Driver CD-ROM into the CD-ROM drive and the installation program will start automatically.
2. If the installation program does not start automatically, click on ‘Start-> Run’. Type ‘x:/setup.exe’, (assuming X is your CD-ROM drive).
3. Click ‘Driver’ in the menu. The installation of the driver will start. Click ‘next’.
4. Keep the default destination folder. Click ‘Next’.
5. Keep the default Program Folder. Click ‘Next’.
6. The driver will be installed. When using Windows 2000 or XP, a pop-up message will appear that the product is not digitally signed or a message about the logo test will appear. Click ‘Yes’ or ‘Continue Anyway’ to continue.
7. Click ‘Finish’ to complete.

Hardware installation

Installing the Funcam Camera

• After the driver installation is completed, you may plugin the Funcam into any available USB port on your PC or on any USB hub attached to your PC.
• Windows will detect a new USB device and install the device automatically. Restart the computer.

Note for Windows 98SE and Windows Me

• Windows 98SE and Windows Me can ask for the installation CD-ROM of Windows. Insert this CD-ROM when the computer asks for.
• When Windows asks for an *.ax file you can refer to the Conceptronic Funcam installation CD-ROM (x:\Driver\Camera Driver, assuming x: is your CD-Rom drive).

5.1.2 Note for Windows 2000 and XP users

1. (XP) Windows will prompt a ‘Found New Hardware Wizard’. Select ‘Install the software…(Recommended)’, click ‘Next’.
2. A popup message about a digital signature or logo test will appear. Click ‘Yes’ or ‘Continue Anyway’.
3. Click ‘Finish’ to complete. Restart the computer.

Application installation

After the driver installation, you have to install the application software.

• When the menu of the driver CD-ROM is still on your screen, click
• ‘Install’ to start the installation. Otherwise, repeat only step 3 of the Driver installation.
• The installation will install by default all the available applications.
• If you want to customize the installation, click ‘Selection’ in the menu. You can select the preferred applications. After using this option only the selected applications will be installed when clicking on ‘Install’.
• Click ‘Finish’ to complete.
• You also can change the ‘Installation Directory’ and the ‘Program group’.
• To close the menu, click the ‘x’ in the right upper corner of the menu.

Uninstalling

Uninstalling the Funcam driver

1. Click ‘Start’-> Programs-> Funcam-> Uninstall.
2. ‘Confirm File Deletion’ message appears, click ‘OK’
3. Click ‘Finish’ to complete. Restart the computer. Don’t forget to unplug the Funcam from the USB port.

Un-installing applications

1. To remove all the installed applications from this product;
2. Click ‘Start’ -> ‘Programs’ -> ‘VP-EYE’-> ‘VP-EYE Uninstall’.
3. All the installed applications are selected, to uninstall the selected items, click ‘Uninstall’. Click ‘Exit’.
4. Restart the computer.

Frequently Asked Questions

Where can I find the Hardware Installation Guide for the Conceptronic Funcam?

The Hardware Installation Guide should be included with the product. If you've misplaced it, you can contact Conceptronic's support for assistance.

What should I do if I'm using Windows 98SE or Windows Me while using Conceptronic CFUNCAM?

Windows 98SE and Windows Me may ask for the installation CD-ROM of Windows when installing the Funcam. Insert the required CD-ROM when prompted.

What should I do while using Conceptronic CFUNCAM if I'm using Windows 2000 or XP?

Windows will prompt a 'Found New Hardware Wizard.' Select 'Install the software…(Recommended)' and follow the on-screen instructions. Click 'Finish' to complete the installation and restart the computer.

I've lost the CD containing the Funcam Driver & VP-EYE 4.0. Where can I download the drivers and software?

You can visit Conceptronic's official website at www.conceptronic.net and go to the Support section. Here, you can find and download the necessary drivers and software for your CFUNCAM Webcam.

What is the purpose of the Snapshot Button on the webcam?

The Snapshot Button allows you to capture still images while using the webcam. Pressing this button will take a snapshot of the current video feed.

Can I use the Conceptronic CFUNCAM Webcam with a Mac or Linux operating system?

The CFUNCAM Webcam is designed for Windows operating systems (Windows 98(SE)/2000/Me/XP) and may not be compatible with Mac or Linux systems without additional software or drivers.

How can I adjust the focus of the webcam?

The CFUNCAM Webcam has an adjustable lens. You can manually adjust the lens to achieve the desired focus. Twist the lens to the left or right until the image appears clear.

Can I use the CFUNCAM Webcam for video conferencing or online meetings?

Yes, you can use the CFUNCAM Webcam for video conferencing, online meetings, and other video communication applications that support external webcams. Ensure that you have installed the necessary drivers and software for optimal performance.

What is the maximum resolution and frame rate supported by the CFUNCAM Webcam?

The CFUNCAM Webcam supports a maximum resolution of 640 x 480 pixels and a frame rate of up to 30 frames per second at 352 x 288 resolution. It also supports 35 frames per second at 176 x 144 resolution.

Can I use the CFUNCAM Webcam with video recording and streaming software?

Yes, you can use the CFUNCAM Webcam with various video recording and streaming software applications, such as OBS (Open Broadcaster Software) and others that support external webcams. Ensure that you have installed the required drivers and software for compatibility.

How do I enable or disable the microphone on the CFUNCAM Webcam?

The CFUNCAM Webcam does not have a built-in microphone. If you need audio capabilities, you will need to use an external microphone connected to your computer separately.

Can I use the CFUNCAM Webcam with video recording software for creating YouTube videos or content for social media?

Yes, you can use the CFUNCAM Webcam for creating videos for YouTube and social media platforms. Make sure to choose video recording software that is compatible with your webcam, and set the desired resolution and frame rate for your recordings.

Reference:Conceptronic CFUNCAM Webcam Installation Guide- device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>