TECHBEAR Electric Hot Pot with Steamer User Manual

User Manual

Product Description

Product working principle

Switch knob to “Off”, as in Figure 1: the product is not energised, the indicator light is not on and the product is not heated;
The switch knob is pointed to ·1·, as shown in Figure 2: the product is energised, the indicator light is on and the product is heated, at this time the product is heated at half power;
Switch knob to ·11·, as in Figure 3: the product is energised, the indicator light is on and heated, at this time the product is full-power heating;
When the water in the pot has boiled, the product will not automatically cut off, in order to avoid the phenomenon of intense boiling occurs, you need to look after the use of the side, when an accident occurs dry burning, overheating to reach a specific temperature when the product will automatically jump off.
In order to ensure safety, please walk away in the process of use or stop using, be sure to turn the switch to the position shown in Figure 1, and pull out the power plug.

How to use

Warm Tips:
Before the first time to use or a long time without use, need to use, you should first wash the inside and outside of the pot first, and then add water into the pot, and then boil the water two to three times, and pour it out, in order to clean and disinfect the body of the pot, the first two times to use may have a little smoke or odour is normal.

• Boiling water
  Take off the glass cover, add appropriate amount of water, and then cover the glass cover.
  Turn on the power, set the switch knob to ·11·, the indicator light will be on and the product will start to heat up.
  When the water in the pot boils, turn the switch knob to ·oFF.

• Cooking Noodles
  Take off the glass lid, add appropriate amount of water, and then cover the glass lid.
  Turn on the power, set the switch knob to ·11·, the indicator light will be on and the product will start to heat up.
  When the water in the pot boils, put the noodles into the pot, set the switch knob to ·1·, when the noodles are cooked, add the seasoning and mix well, set the switch knob to ·oFF·, the indicator light goes out and the product stops heating.

• Make hotpot
  Take away the glass cover, add appropriate amount of water, and then cover the glass cover.
  Turn on the power, set the switch knob to ·11·, the indicator light will be on and the product will start heating.
  When the water in the pot boils, put the food into the pot, cook and then enjoy, if you want to reduce the boiling effect can be adjusted to the switch knob to ·1·, the machine will be half-power heating; if you do not want to heat up, you can switch the switch knob to “off”, turn off the power.

• Steam food (only products with steamer basket)
  Add appropriate amount of water into the pot and place the pot on the base.
  Place the steamer basket on the base, add the food to be steamed and close the glass lid.
  Plug in the power supply, set the switch knob to ·11·, the indicator light will be on and the product will start to heat up.
  After enough steaming time and the food is cooked through, turn the switch knob to ”oFF” and unplug the appliance from the mains.

• Frying food
  When frying eggs and other objects, please add appropriate amount of vegetable oil into the pan first, during the frying process, please use a wooden spatula or chopsticks to stir-fry, so as not to damage the coating, after the frying process, please turn the knob to the off position, and wait until the appliance has cooled down before cleaning the pan.

Warm Tips: grease should be properly soaked, avoid using stainless steel wire ball to clean.
Basic Parameter Table

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>