WHOOP CY-T2 TWS Headphones User Manual
- May 15, 2024
- WHOOP
Table of Contents
WHOOP CY-T2 TWS Headphones
Product Information
Specifications
- Model: CY-T2
- Product Type: TWS headphones
Frequently Asked Questions
- Q: How do I charge the headphones?
- A: Insert the headphones into the charging compartment and connect it to a power source using a USB charging cable.
- Q: How do I know if the headphones are charging?
- A: If the headphones indicate that they are not charging after insertion into the charging compartment, please use a USB charging cable and charge the compartment at the same time.
- Q: How do I pair the headphones with my phone?
- A: In automatic matching mode, take out both headphones, wait for the prompt sound “Power on,” and then open the Bluetooth function on your phone to search for available devices. Find the pairing name BT-08 and click on it to complete the pairing.
- Q: Can I use the headphones in single ear mode?
- A: Yes, you can use either earphone separately by taking it out of the charging compartment and entering the search pairing mode. Search for BT-08 on your phone and click to connect.
Usage Modes
Automatic matching of dual earphone usage modes
(This mode is suitable for first-time use)
- Reinsert the dual headphones into the charging compartment, turn on the red light, and then remove the dual headphones to activate both earphones. Note: If the earphones indicate that they are not charging after insertion, please use a USB charging cable and charge the charging column at the same time
- Take out two headphones and automatically turn them on. The blue flashing prompt sound “Power on” will pair up in 7-10 seconds, and then the left ear will sound “Left channel” and the right ear will sound “Right channel”, indicating the successful pairing of the two headphones. At this point, the main headphone flashes red and blue, while the blue light of the auxiliary headphone flashes steadily. Open the Bluetooth function of the phone to search for elements, find the pairing name: BT-08, and then click on pairing. The prompt sound “Connection successful” will complete the pairing and enter the usage status
- After the successful connection in the dual ear mode, every time you connect your Marie devie in seton, win or unnecessary repetitive operations
Manual matching of dual headphone usage modes
(Used when automatic matching fails)
- Long press and hold the main control button for 3 seconds for each pair of headphones (at this time, the blue light of the two headphones slowly flashes, and the prompt tone is: flower on), and then enter pairing mode. After 7-10 seconds, both ears will pair. and the left ear will repot left” channel” and the right ear will report right channel”. Then, the main ear will enter pairing mode by flashing red and blue,
- Open the mobile phone’s tooth function interface to search. find the pairing name BT-08, and then click on pairing. The prompt sound is “Successfully connected,
Complete pairing
- If there are headphones that have been connected to your phone before, and they are turned on at the same time, they will connect to your device in seconds, so there is no need to repeat the anaration
Dual Headphones
Dual Headphones – Explanation of Operating Functions
Power on
- The earphones can be automatically turned on by taking out of the charging compartment.
- In the absence of automatic power on, you can long touch the dual earphones for about 3 seconds to turn them on
Shutdown
- Long touch on either side of the earphone for about 5 seconds with one click of ‘turn off to turn it off
Play/Pause
- Pressing either earphone (R or L) during playback can pause playback
Connect/disconnect the phone
- Pressing either earphone during a call can connect or end the call
Reject calls
- Double tap either earphone twice continuously during an incoming call to reject the call
- Tum on or off the intelligent voice assistant (such as Siri)
- When in use or standby, long touch either earphone for about 1.5 second to wake up SIRI
- Press and hold either earphone for 1.5 second while using Siri to turn it off
You need to use a separate earphone
(Single ear mode) Please take a look here
After using either earphone separately and taking it out of the charging mode of the charging compartment, the prompt tone: “Power on”, Pairing” will automatically enter the search pairing mode. You can directly search for BT-08 on the Bluetooth-function interface of your phone, and click to connect the device. The prompt tone is “Connect successfully”, and you will enter the use mode. At this time, please put the other earphone back into the charging compartment and enter the charging shutdown state
How to charge
How to charge headphones?
- Place the earphones into the charging compartment, and after these cut are a manor its or bot re aprone a ones charging compartment will go out
- The blue light of the charging indicator light for the earphones in the charging compartment is constantly on
How to charge the charging compartment?
- Use a normal SV charger to charge the charging compartment, and the indicator light flashes red when charging the compartment,
- When the charging compartment is fully charged, the blue light is always on
How to display the capacity of the charging compartment digitally?
- Feel the fingerprint pattern on the surface of the charging compartment headphone slot with your finger to light up the digital display of battery level.
- Touch it again, and the digital display light will go out, allowing you to know the capacity anytime and anywhere.
Product parameters
- Model: CY-T2
- wireless connection version: 5.3
- Communication distance: approximately 15-20 meters
- Headphone standby time: 120h
- Headphone charging time: 08h
- Talk time: approximately 3 hours
- Music duration: 4 hours
- Charging voltage: DCSv
- Charging box battery capacity: 300Mah
- Supported protocols: HFP/HSP/A2DP/ARCP/SPP
Matters needing attention
- Please follow the instructions in this manual.
- Do not use a charger that exceeds the rated current and voltage (5V 1A) of the earphones to charge them, otherwise it may easily cause damage to the earphone battery.
- Please use and store this product in a room temperature environment.
- Do not use this product near heat sources. Such as a heating device, hot air regulator, stove, or other instrument that generates heat.
- Radiator block the micrograph of the earphones, such as the charging port,
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.