NBGRLVS V22 Water Flosser Teeth Cleaning Pick Instruction Manual

RECHARGEABLE
PORTABLE
DENTAL WATER FLOSSER

V22 Water Flosser Teeth Cleaning Pick

INSTRUCTIONS MANUAL

‘Thank you for purchasing our products.

• Please read the instruction manual carefully and use it orrectly and safely.
• Be sure to read the “Safety Precautions” before use.
• Please keep the instruction manual carefully.

SAFETY PRECAUTIONS

• Please read all the contents of this Instructions Manual carefully before using this product.
• keep this manual properly. If you give the product to othersfor use, please give this manual together with the product.
• Any operation that does not comply with Instructions Manual may cause serious personal injury, property damage or damage to the product iself.
• We wil not bear the relevant legal responsibility for the losses caused by the operation not i accordance with the instructions of this product.

NOTES!
To reduce the risk of electric shack, please pay attention to the following:

• Do not disassemble the internal components of the machine by yourself.
• Before and after use, always pay attention to check whether the power cord is damaged,  and keep the power cord away from the heated surface.
• Do not putor nsertforeign objects nto any openings or hoses.
• Do not touch the power supply of this product or charge the product in a non-dry environment.
• Do not plug or unplug the charger with wet hands.
• Do ot use it in the bath.
• Do not immerse the machine in water or other liquids.
• Do not place o store the product where it may fallor be pulled into the bathtub, shower ro0m or wash basin.
• The product’s water tank can only be iled with water or other non-corrosive solutions recommended by a professional doctor (such as a tooth rinse or a designated solution)

WORRING!
If you have undergone oral o dental surgery in the past 2 months, please consult the surgeon in charge before using this product, and follow the doctor’s advice and guidance.

• If the power cord or plug of the product is damaged, or the product is not working properly,or the productis damaged by falling, do not use t.
• Do ot pour water into the tongue, ears,nose or other sensitive parts. The pressure generated by this product may cause serious injury to these parts.
• Use this product only under the conditions listed in this manual or recommended by your dentist
• Only use the et nozzles and accessories recommended by us.
• Without the guidance of a guardian, this product is not suitable for people (including children) who have poor physical, sensory or psychological abilties or lack experience and cogition,
• Do ot let children play with this product.
• When using this product for oralcleaning for the firs time, even f your gums are healthy, you may experience slight bleeding from your gums. This is because your gums are stimulated by the jet pressure for the firs time, and usually stop bleeding after 1 to 2 weeks of adaptation. Ifyou have gum bleeding that lasts for more than 2 weeks, it may mean that your gums have abnormal conditions such as periodontal disease. At this time, please stop using the product and consult your dentist,
• Do keep this Instructions Manual properly.

PRODUCT DESCRIPTION

Component Description

Specifications

restore the mode used last time, no need to choose again)
“Automatic Shut-Down Function| ‘Continuously working for more than 120 seconds will automatically shut down

Note: There may be some liquid remaining in the water tank n the product.This is the distilled water remaining in the factory inspection, and there is no health and safety hazard.

OPERATION INSTRUCTIONS

Charging Notes
Charge the device for more than 6 hours before first use.
Note: This product doesn’tattach a power adaper.
When charging the device, you can use the USB.
Grarging Cable to connect 1 ary SV mobile phone povier adapter, computer, and power bank to charge.

1. When the device is charging, the LED mode indicator light keeps lashing: when it i fully charged, the LED mode indicator light stays on until the power plug is unplugged. A full charge takes about 4-6 hours
2. When the poweer of the device is about to run out, the LED mode indicator willlash to remind you to charge; ifyou continue to use it, the device will automatically shut down,
3. When the device is out of power, press the power button, the device cannot be started, and the LED mode indicator flashes 3 times and then goes out. You need to charge the device at this time.

Note:

1. When the power of the device islow, it is recommended to charge the device to make the device lfe longer.
2. Any operation during charging s invalic.
3. If you have not used it for more than three months, please charge the device for more than 6 hours before use.

Nozzles Insertion & Removal

1. When inserting the nozzle just align the nozzle and press it down slightly harder untilyou hear the nozzle click into place.
2. To removal the nozzle, pullthe nozzle upward from the handle while pressing the Nozzles ject Button. (Note: You need to keep pressing the Nozles Eject Button)

Water Tank Filling

Open the water tank cover, and then fillng water into the water tank.
Note: The water tank cover’s axis s removable. It is accidentally removed, ust reinstall it
Mode /Water Pressure Select

1. Press the Mode Selector Button,the LED Mode Indicator will light up,showing the current water pressure level;
2. Each time you press the Mode Selector Button, the LED Mod Indicator lights up one mre level from bottom to top, and the corresponding water pressure vl i from light o strong, with a total o 6 water pressure levels.You can set the appropriate gear according to your needs

Note: When using this product for the firs time, please set the gear to the lowest (1st gear ) to avoid discompfort due to excessive water pressure.
Device startup and shutdown

1. Press the Power Button, the device starts to work,the corresponding LED Mode Indicator is on; when the device needs to be tuned off after use, press the Power Button, the device stops working, and the LED Mode Indicator goes out.
2. When the device is running, ress the Mode Selector Button to adjust the water pressure intensity.
3. The device has a memory function. When itis turned o for the second time, the device will automatically work according to the previous working mode setting, there s no need toset it again.
4. After flushing the teeth, drain the water inide the device to prevent bacteria breeding

Note:
When using the product for the frst time, please select 1st gear, and before starting the equipment, you should aim the nozzle at the wash basin to prevent water from spraying everywhere after the equipment is started.

Water tank Installation & Remova
Removal: Rotate the balance vent of the water tank counterclockwise to the position of the unlock symbol; then lft the main unit with slightly.
Installation: Align the balance vent of the water tank with the position of the unlock symbol; press down slightly to fit the handle and the water tank, and then rotate clockwise to align the balance vent of the water tank with the position of the lock symbol, and check whether it i stable.

NOZZLES OPERATION INSTRUCTIONS

Tongue Cleaning Nozzle
Put the Tongue Cleaning Nozle on the tongue, then start the machine, use the lowest water pressure(1t geal) firs time, and then increase the pressure according to your needs. put the Tongue. Cleaning Nozle in the middle of the back half of the tongue, and then gentl pull it forward along the tongue surface.
Periodontal Pocket Nozzle
Periodontal Pocket Nozzle are specially designed to deliver water or antibacterial flud to deep periodontal pockets. When using Periodontal Pocket Nozzle, be sure to set the machine to the lowest (water pressure(1st geal). Point the Periodontal Pocket Nozle at a
45-degree angle to a tooth, and move the nozzle gently untiltis underthe gum line and enters the periodontal pocket.
Orthodontic Nozzle
Orthodontic Nozzle are designed for tooth braces and other parts thatare difficult to reach for washing. When you use this nozzle, it will spray pressure water to clean tooth braces and the gap between teeth. Classic Nozzle
Move the nozzle along the gum line and stay between the teeth fora short time. Continue cleaning until the inner and outer sides of the upper and lower teeth are cleaned. Make the jet stream and the gum line at a 90-degree angle. Close your lips lightly to avoid splashing, but leave a gap to allow water in your mouth to flow freely into the sink. Keep the machine upright during use for best effect.

CLEANING AND MAINTENANCE

Do not immerse the machine in water. Before cleaning the device, unplug the power cord from the power outlet.
Water tank cleaning:
The water tank can be cleaned with soapy water or placed on the top shelf of the dishwasher.
Before exposing the product to a freezing temperature environment, be sure to remove the water tank and clean up the water in the product.
Use a brush or similar to wash off the dirt, and then wipe it with a cloth.
Dry the water tank when not use for a long time.
Nozzle cleaning:
Keeping press Nozzles Eject Button to remove nozzle, wash it with water and wipe it with a cloth.
It is recommended to replace with a new nozzle every 3-6 months or so. Otherwise, the nozzle will become too large to complete effective cleaning, and may even cause malfunction.
Main body cleaning:
Please use a soft cloth with neutral detergent to wipe the surface. If it is very dirty, it can be washed with water. After washing with water, please wipe off the water.
Do not use alcohol, gasoline, thinner and other solutions to wipe this product;
Do not wash with hot water higher than 50°C.
Suction pipe cleaning:
After washing with water, wipe with a cloth.
Do not bend the suction pipe. Otherwise, it will cause failures such as the suction pipe to stop sucking water during operation.
Water tank cover cleaning:
Wipe off the dirt on the water tank cover, otherwise it will cause water leakage.
Notes:

1. After using any special solution on the machine, it needs to be rinsed to prevent clogging; pour some warm water into the water tank, then align the nozzle with the wash basin, turn on the machine, and then run until the water tank is empty.
2. Because the water contains a lot of minerals, hard water deposits may accumulate in the. dental flusher and affect the performance of the equipment, so it needs to be cleaned properly. When cleaning the interior
3. Fill the water tank with warm water and add some vinegar.
4. Align the handle and nozzle with the wash basin. Turn on the equipment and let it run untilthe water tank s empty.
5. Fill the water tank with clean warm water, and then repeat the above operation to inse.
6. After completing the cleaning procedure, please make sure that the charging portis completely dry before connecting to the main power supply.
   We recommend repeating it every 1 to 3 months to ensure the best performance of the equipment.

BATTERY DISPOSAL METHOD

Before disposing of this product, remove the rechargeable battery from the machine. If  thereis an officially designated battery processing center, be sure to go there to dispose of used batteries. Do ot disassemble or replace the battery toreuse ) this product. Otherwise, it may cause fire or electric shock. Please follow steps ()to (3) to remove the battery.

COMMON FAULTS AND SOLUTIONS

use.
The water tank cover is not completely closed.| Close the water tank cover.
water leaking between the nozzle and nozzle socket| The nozzle does not engage the nozzle socket completely.| Remove the nozzle and reinstall it.
No liquid flow or insufficient pressure| The device is upside down.| The nozzle must be higher than the water tank.
Insufficient liquid in water tank.| Fill the water tank with liquid.
The water pressure is insufficient when the first time use.| Adjust the product to 6th gear, and then choose the appropriate gear after spraying water.
Device cannot be charged| The power socket is turn off.| Turn on the power socket.
The USB charging cable is not properly connected.| Reconnect the USB charging cable.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>