TAOPODO i33 True Wireless Stereo Earphones User Manual

TAOPODO i33 True Wireless Stereo Earphones

Compatibility

This product is compatible with all Bluetooth-enabled mobile phones (iOS/Android/Windows Phone), tablet PCs, smart watches, notebooks and desktop computers.

Product Overview

① Volume down/last song
② Volume up/next song
③ Mule-function touch control key
④ Earphone Indicator/ Call Microphone
⑤ TYPE-C charging port
⑥ 360°rotating ear-hook
⑦ Microphone for cell phone
⑧ 270°rotating microphone pole
⑨ Charging case intelligent display

Headphone use

It can be worn on both the left and right ears optional, The microphone rod is rotated and the ear hook is rotated 180° to adjust left and right wear style.

Powering ON:

Method 1: Take out the earphones from the charging case, and they will “power on”

Method 2 Method 2: When the headset is turned off, touch and hold the touch Location of the headset for about 3 seconds, the red and blue lights flash alternately after the blue light is lighting for 1S, and with the power on prompt sound “power on”

Powering OFF:

Method 1: The earphones will switch off when put into the charger case.
Method 2: When the headset is turned off, touch and hold the touch Location of the headset for about 3 seconds, the red and blue lights flash alternately after the blue light is lighting for 1S, and with the power on prompt sound “power on”
Note: If the earphones were disconnect with the device, the earphones will be power off automatically after 5mins.

Headset pairing

1. When the headset was taken out of the charging case, the headset automatically turns on and enters the pairing state, and the red and blue lights flash alternately.
   

2. Open the Bluetooth devices page inside settings. Search for “i33” and select it to pair, the Earphone lights be off after the earphones connected with device.

Note: If the earphones connected the device once, and the Bluetooth functions of device was open ,the earphones will be reconnected with last device automatically

Play Music:

1. Double click the touch location to play/pause .
2. Long press the “+” button for the next song, long press the “-” button for the last song
3. Click the “+” button for volume up, click the “-”button for volume down

Voice Assistant:

Touch the button three times to activate the Siri voice assistant.

Calling:

1. Double-click the touch location of the headset to answer the call, and long press to reject the call.
2. When headset are calling state, double-click the touch location of the headset to hang up the call and restore the previous state.
3. User can adjust the calling volume by cellphone when calling
4. To redial the last phone number, press the button“+” and the button“-” at the same time.

Headset charging:

When the power of the headset is low, the headset red light will flashes, and the headset will have “Please charge sound, please charge the headset. The headset have a TYPE-C charging port, you can charging the headset with the data cable directly, or put it into charging case for a charging. The red light will always lighting when charging. And the blue light will always on when fully charged.

Specifications

1. Bluetooth version: V5.3
2. Voltage rating and energy capacity: 3.7V/400mAh
3. Battery capacity: 1*3.7V/95mAh
4. Earphone Charge time: 2hour
5. Music playing time: About 15h*3Times
6. Bluetooth profiles supported: HFP/A2DP/AVRCP
7. Operating frequency: 2.40 GHZ-2.48 GHZ
8. RF Sensitivity: -92dBm
9. Working temperature range: -10+50
10. Maximum transmission range: 15M

Packing list:

• Earphones *1
• Charging case *1
• User manual *1
• USB cable *1
• Earcups *2(L\ S)

Important:

1. When not connected to any device, the power off automatically after 5 minutes.

2. On iPhones the battery level of the earphones will be displayed in real time.

3. When the earphones and the charger case are not used for long periods of time, it is recommended to keep them in a dry place and to recharge them at least every 2 months.

4. It is recommended to gently wipe the spring needle and copper column with a cotton swab on a regular basis to achieve a cleaning effect. Never use liquids to clean the earbuds.
   
   Note: When the earbuds is not charging, you can use a cotton swab to gently wipe the spring needle and copper post.

5. Reset to factory settings: Quickly 5-click the touch location to clear the pairing record and turn off.

Fault:

earphones touch button pressed for 8 seconds
No charging indication| The Earbuds are not well put into/ There are foreign objects in the spring needle and copper column| Adjust Earbuds position/ Clean the spring needle and copper column
Automatically shut down| Earbuds are low battery| charge the Earbuds
The Earbuds have an echo| The volume is too high or the environment is too noisy| Adjust the volume or change position
The Earbuds are noisy| Outside environment interference or too far away from mobile phone| Change position, or move closer to the mobile phone
Small sound| wearing Earbuds incorrectly or the volume is too low| Adjust the Earbuds position or the mobile phone volume
Signal intermittent| Outside environment interference or too far away from mobile phone| Change to better environment or move closer to the mobile phone

FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet genera RF exposure requirement. The device can be used in portable exposure condition without restriction
FCC ID: 2A8TA-I33
Because the headset is too small, the FCC ID number can only be printed on the charging box.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>