Bestway 57241 My First Fast Set Round Inflatable Pool Owner’s Manual

June 16, 2024
Bestway

Bestway 57241 My First Fast Set Round Inflatable Pool

Product Information

Specifications

Product Description
The My First Fast Set Pool is a portable swimming pool designed for children aged 2 and above. It is easy to assemble and does not require any tools. The pool is made of durable materials to ensure long-lasting use.

Parts
Please refer to the item name or number stated on the packaging for identification. The packaging must be read carefully and kept for future reference. Drawings in the manual are for illustration purposes only and may not reflect the actual product. They are not drawn to scale.

Product Usage Instructions

Installation

Assembly can be completed without tools. Follow the steps below:

  1. Find solid, level ground and clear it of debris. Avoid setting up the pool under cables or trees.
  2. Spread out the pool and make sure it is right side up.
  3. Cover the water valve.
  4. Inflate the top ring and close the air valve after inflation.
  5. When the top ring reaches the correct pressure, it should be slightly stiff to the touch. Avoid over-inflating the top ring as it can cause damage.

Dismantling the Pool

To dismantle the pool, follow these steps:

  1. Open the water valve on the bottom of the pool to drain the water automatically. Check local regulations for drainage by-laws. Only adults should handle this step.
  2. Push down the wall of the pool to release the water.
  3. Open the air valve on the top ring to deflate.
  4. Allow the pool to air dry. Do not leave the drained pool outside.

Repair
If your pool gets damaged, use the provided repair patch to fix it:

  1. Clean the area to be repaired.
  2. Carefully peel the patch.
  3. Press the patch over the damaged area.
  4. Wait for 30 minutes before inflating the pool again.

Pool Maintenance

Proper maintenance is important for the health and longevity of your pool. Follow these guidelines:

  1. Change the water frequently, especially in hot weather or when it becomes noticeably contaminated. Unclean water can be harmful to health.
  2. Contact your local retailer to obtain chemicals for treating the water in your pool. Always follow the chemical manufacturer’s instructions.
  3. Regular maintenance can maximize the life of your pool.

Cleaning and Storage
After deflation, clean and store your pool properly:

  1. Use a damp cloth to gently clean all surfaces. Never use solvents or other chemicals that may damage the product.
  2. Remove all accessories and spare parts from the pool and store them clean and dry.
  3. Once the pool is completely dry, sprinkle it with talcum powder to prevent sticking.

FAQ

Q: Can I set up the pool on uneven ground?
A: It is recommended to find solid, level ground for setting up the pool. Uneven ground may affect the stability and safety of the pool.

Q: How often should I change the water in the pool?
A: It is recommended to change the water frequently, especially in hot weather or when it becomes noticeably contaminated. This helps maintain clean and hygienic conditions for users.

Q: Can I use any chemicals to treat the water in the pool?
A: Please contact your local retailer to obtain chemicals specifically designed for treating pool water. Follow the instructions provided by the chemical manufacturer to ensure proper usage.

Q: How should I store the pool when not in use?
A: After deflation, clean all surfaces of the pool with a damp cloth. Remove all accessories and spare parts, and store them clean and dry. Once the pool is completely dry, sprinkle it with talcum powder to prevent sticking.

WARNING

Never leave your child unattended – drowning hazard.

  • Only for domestic use.
  • Only for outdoor use.
  • Children can drown in very small amounts of water. Empty the pool when not in use.
  • Do not install the paddling pool over concrete, asphalt or any other hard surface.
  • Place the product on a level surface at least 2 m from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines or electrical wires.
  • Recommend back towards the sun when playing.
  • Modification by the consumer of the original paddling pool (for example the addition of accessories) shall be carried out according to the instructions of the manufacturer.
  • Keep assembly and installation instruction for future reference.

PRODUCT DESCRIPTION

Item Aged
57241 2+

Refer to the item name or number stated on the packaging.
Packaging must be read carefully and kept for future reference.

PARTS

Bestway-57241-My-First-Fast-Set-Round-Inflatable-
Pool-1

Drawings are for illustration purposes only. May not reflect actual product. Not to scale.

PREPARATION

Recommendations regarding placement of the pool:

  • It is essential the pool is set up on solid, level ground. If the pool is set up on uneven ground it can cause collapse of the pool and flooding, causing serious personal injury and/or damage to personal property.

  • Do not set up on driveways, decks, platforms, gravel or asphalt.
    Ground should be firm enough to withstand the pressure of the water; mud, sand, soft / loose soil or tar are not suitable.

  • The ground must be cleared of all objects and debris including stones and twigs.

  • Check with your local city council for by-laws relating to fencing, barriers, lighting and safety requirements and ensure you comply with all laws.

INSTALLATION

Assembly can be completed without tools.

NOTE: It is important to assemble pool in the order shown below.

Adult assembly required.

  1. Find solid, level ground and clear it of debris.
    ATTENTION: Do not set up the pool under cables or under trees.

  2. Spread out the pool and make sure it is right side up.

  3. Cover the water valve.

  4. Inflate the top ring and close the air valve after inflation.

  5. When the top ring reaches the correct pressure, it should be slightly stiff to the touch. Over-inflating the top ring can cause permanent deformation or damages, due to the high elasticity of the PVC material.
    NOTE: Do not over inflate. Over inflation may cause damage.

  6. Put 1cm / 0.39” of water in the pool to cover the floor. Once pool floor is slightly covered, gently smooth out all wrinkles.
    Start in the center of the pool and work your way clockwise to the outside.

  7. Fill the water until the wall is straight up, and the water reaches the welding line. Please kindly pay the utmost attention not over fill the pool for security reasons.

Bestway-57241-My-First-Fast-Set-Round-Inflatable-
Pool-2

DISMANTLING THE POOL

  1. Open water valve on the bottom of the pool, water will drain automatically. (Check local regulations for drainage by-laws).
    Then push down the wall of the pool to release the water.
    NOTE: Drain by adult only!

  2. Open the air valve on the top ring to deflate.

  3. Air dry.
    ATTENTION: Do not leave the drained pool outside.

REPAIR
If your pool is damaged, use the provided repair patch.

  1. Clean area to be repaired.
  2. Carefully peel patch.
  3. Press patch over area to be repaired.
  4. Wait 30 minutes before inflation.

POOL MAINTENANCE

WARNING: If you do not adhere to the maintenance guidelines covered herein, your health might be at risk, especially that of your children.

  1. Change the water of pools frequently (particularly in hot weather) or when noticeably contaminated, unclean water is harmful to the user’s health.
  2. Please contact your local retailer to obtain chemicals to treat the water in your pool. Be sure to follow the chemical manufacturer’s instructions.
  3. Proper maintenance can maximize the life of your pool.

CLEANING AND STORAGE

  1. After deflation, use a damp cloth to gently clean all surfaces.
    NOTE: Never use solvents or other chemicals that may damage the product.

  2. Remove all the accessories and spare parts of the pool and store them clean and dry.

  3. Once pool is completely dry, sprinkle with talcum powder to prevent pool from sticking together, fold pool carefully. If pool is not completely dry, mould may result and will damage the pool liner.

  4. Store liner and accessories in a cool, dry place out of children’s reach, with a moderate temperature between 5°C / 41°F and 38°C / 100°F.

  5. During the rainy season, pool and accessories should be stored as instructed above.

  6. Unproper draining of the pool might cause serious personal injury and/or damage to personal property.

  7. Check the product for damage at the beginning of each season and at regular intervals when in use.

©2023 Bestway Inflatables & Material Corp.

All rights reserved

Trademarks used in some countries under license from

Bestway Inflatables & Material Corp., Shanghai, China
Manufactured, distributed and represented in the European Union by

www.bestwaycorp.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals