Primevolve P2000 Portable Oscillating Fan Instruction Manual
- May 15, 2024
- Primevolve
Table of Contents
Primevolve P2000 Portable Oscillating Fan
Product Information
Specifications:
- Model: P2000
- Oscillation: 90 degrees
- Front fan cover: Removable
- Lock cover: Removable
- Fan blade: Removable
- Fan Oscillation: Yes
- Air volume adjustment: Yes
- Sleep wind mode: Yes
- Timing: Yes
- Locking device: Yes
- Infrared receiving area: Yes
- Fan On/Off: Yes
- Non-slip silicone: Yes
- USB interface: Yes
- Fan back cover: Removable
- Telescopic rod: Yes
- Hand strap: Yes
- Power adapter: DC/2.0A
- Dimensions: 480*120mm
- Weight: 128g
Product parameters
- Product name: Folding fan
- Product model: P2000
- Main material: HIPS/ABS plastic
- Battery model: lithium battery
- Folding size: 250250125mm
- Stretching size: 250250972mm
- Oscillation degree: 90$5°
- Charging time: 41hours
- Noise decibel: 13~235db
- Charging voltage: DC 5V/2~4A
- Working wind speed: 2.8~4.2m/s
- Working temperature: <50°C
Product Usage Instructions
Function Description:
Power on/off function:
In the shutdown state, press the power switch key once to start the
machine, and it will directly enter the first level of soft wind. Press the
power switch again to turn off the fan.
Air volume gear key:
In the power-on state, the default air volume is set to the first level of
soft wind. The first gear light in the lower row will be on. Single press the
air volume gear key for the second time to switch to the second level cool
breeze. The second gear light in the lower row will be on. Press the key for
the third time to switch to the third level strong wind, and the third gear
light in the lower row will light up. Press the key for the fourth time to
switch to the fourth level natural wind, and the fourth gear light on the
upper row will light up. Keep pressing the air volume gear key to cycle
through the above steps.
Fan Oscillation function:
When the fan is on, click the Oscillation button once to turn on the
90-degree oscillation function of the base. Press the button again to turn off
the oscillation function. When the fan is off, clicking the button will have
no effect.
Battery power display function:
In the power-on state, if any button is not operated for 3 seconds, the
bottom LED will automatically turn on. The four LEDs will display according to
the actual battery power. The first gear LED1 light indicates approximately
1-25% power, the second gear LED2 light indicates approximately 26%-50% power,
the third gear LED3 light indicates approximately 51%-75% power, and the
fourth gear LED4 light indicates approximately 76% to 100% power.
Charging function:
Use a standard DC/2.0A power adapter to correctly connect the USB-C
interface charging cable to the host’s USB interface for charging. During the
charging process, the actual battery power will correspond to the flashing of
the gear LED lights. When all four gears are fully charged, the LED lights
will stay on. The first gear LED1 light will flash until it is turned off,
indicating that the fan needs to be charged.
Timing function:
In the power-on state, click the timing button on the machine, the bottom
battery indicator LED1 flashes 3 times and then starts timing for 1 hour;
click the second time LED2 flashes 3 times and then starts timing for 2 hours;
Click the third time LED3 light flashes 3 times and then start timing for 4
hours; click the fourth ti me LED4 light flashes 3 times and then start timing
8 hours; click the fifth time LED4-3-2-1 turn s off in turn, the timing turns
off, And loop the above steps.
Remote control function:
This product is equipped with an infrared receiving remote control, which
can be used normally within 5 meters. The remote control includes functions
for Oscillation, Air volume adjustment, Time setting, Sleep wind mode, and Fan
ON/OFF.
Product operation steps
In the folded state, pull up at “OPEN” and then open the fan
Turn on the fan in the direction of the arrow
After turning on the fan, adjust the angle to vertical 90-. Then turn the locking device clockwise to fix the angle
The fan can adjust the wind direction up and down 180″
- Switch
- Timing
- Wind speed
- Fan Oscillation
The fan can be adjusted in height Pay attention to gently pulling and closing the lever during use
Storage 1 : fully retract the telescopic rod, and rotate the locking device counterclockwise to completely loosen it
Storage 2 : Loosen the locking device, wait for the telescopic rod, and retract the fan after it is fully retracted
Hold the frame of the fan mask with both hands and tum it counterclockwise to the left to open
The fan blades of the mask can be removed to clean the dust. The body can be wiped with a dry cloth, and it is strictly prohibited
After the mask is left to dry, align the buckle and replace it clockwise
Usb-C charging port Use regular DC 5V2.0A power adapter to charge
Safety Caution
- Please confirm the applied field and facility limited place to use this product, act contrary to public order would be forbidden
- Do not place this product on high and uneven countertops or floors, avoid any falling damage
- Do not use the power supply beyond the product load which might cause the product heating and the circuit board burning out
- Do not disassemble or modify this product by yourself
- Do not hit or throw this product, it would be easily cause internal troubles.
- Do not place the product in a cool, humid place.
- Do not throw the product into the fire, keep it away from the fire.
- warning: This product is not suitable for children no more than 3 years old to use individually
UK /REP
Name: Oule Ltd
Address: 39-41 High Street, New Malden, Surrey, England, KT3 4BY
E-mail: oule.ukrep@outlook.com
EC/REP
Company: Qing UG (haftungsbeschrankt)
Address: Undinestr. 7, 12203 Berlin Germany
Tell: 004917662179550
E-mail: pmdheinrich@gmail.com
Support Email: support@primevolve.com
Website: www.primevolve.com
FAQ (Frequently Asked Questions)
-
Q: How far can I use the remote control?
A: The remote control can be used normally within a range of 5 meters. -
Q: Can I remove the front fan cover, lock cover, and fan blade?
A: Yes, the front fan cover, lock cover, and fan blade are removable for cleaning or maintenance purposes. -
Q: How do I know the battery power level?
A: In the power-on state, if any button is not operated for 3 seconds, the bottom LED will automatically turn on and display the battery power level using four LEDs. -
Q: How do I charge the fan?
A: Use a standard DC/2.0A power adapter to correctly connect the USB-C interface charging cable to the host’s USB interface for charging. The LED lights will indicate the charging progress and battery power level.