Cyetus MF03 Milk Frother User Manual

Cyetus MF03 Milk Frother

Product Information

Specifications

• Model No.: MF03
• Transparent Lid
• Stainless Steel Jug with Non-Stick Coating
• Whisk with Spring
• Power Base With Cord

Important Safeguards

1. Read this user manual thoroughly before first use and save it for future reference.
2. Do not use outdoors.
3. Do not let cord hang over edge of table or counter, or touch hot surfaces.
4. Do not place on or near a hot gas or electric burner, or in a heated oven.
5. To disconnect, turn any control to off, then remove plug from wall outlet.
6. Scalding may occur if the lid is removed during the brewing cycles.
7. To reduce the risk of injury, do not drape cord over the counter top or table top where it can be pulled on by children or tripped over unintentionally.
8. A short power-supply cord is provided to reduce risks resulting from becoming entangled in or tripping over a longer cord.
9. If a long detachable power-supply cord or extension cord is used, ensure it has an electrical rating at least as great as the appliance and arrange it so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over.
10. This appliance has a polarized plug. If the plug does not fit fully into the outlet, reverse the plug or contact a qualified electrician. Do not modify the plug in any way.

Additional Important Safeguards

1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instructions concerning use of the appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
3. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.
4. Keep the product and its cord out of reach of children aged less than 8 years.
5. Caution! To avoid hazards caused by inadvertent resetting of the safety temperature limit, the product should not be immersed in water or other liquids.

Product Usage Instructions

Step 1: Preparation

1. Place the power base on a stable and clean surface.
2. Ensure that the stainless steel jug is clean and dry.
3. Attach the whisk with a spring to the bottom of the jug.
4. Attach the transparent lid securely on top of the jug.

Step 2: Adding Milk

1. Pour the desired amount of milk into the stainless steel jug, making sure not to exceed the maximum level marked for milk heating or milk frothing.
2. If you want to froth cold milk, use the minimum level mark for milk frothing.

Step 3: Frothing

1. Press the button for Heating Only or Heating & Frothing, depending on your desired function.
2. If you want to froth cold milk, press the button for Cold Frothing.
3. The milk frother will start frothing and heating the milk simultaneously.
4. Wait for the frothing process to complete. The frother will automatically stop once the process is finished.

Step 4: Pouring and Cleaning

1. Carefully remove the transparent lid.
2. Pour the frothed milk into your desired container, being cautious as hot liquid may be ejected out of the appliance due to sudden steaming.
3. Clean the product and any accessories thoroughly after each use. Refer to the CLEANING AND CARE section in the user manual for detailed instructions.

Cleaning and Care
Refer to the user manual for detailed instructions on how to clean and care for the milk frother and its accessories.

FAQ

• Q: Can I use this milk frother outdoors?
  A: No, this milk frother is not designed for outdoor use.

• Q: Can I immerse the product in water?
  A: No, the product should not be immersed in water or other liquids. Refer to the user manual for cleaning instructions.

• Q: Can children use this appliance?
  A: Children should be supervised while using this appliance. Cleaning and user maintenance should only be done by children older than 8 years under supervision.

• Q: How do I adjust the power cord length?
  A: The milk frother comes with a short power-supply cord. If you need a longer cord, follow the instructions in the user manual to use a detachable power-supply cord or extension cord.

• Q: How do I prevent scalding when removing the lid?
  A: Avoid removing the lid during the brewing cycles to prevent  scalding. The lid should only be removed after the frothing processis complete and the appliance has cooled down.

Model No.: MF03
PLEASE READ AND SAVE THESE. INSTRUCTIONS FOR FUTURE REFERENCE.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed including the following：

1. Read this user manual thoroughly before first use and save it for future reference. Pay attention to the warnings on the product and in the user manual. It contains important information for your safety as well as proper use and maintenance of the product.
2. Use the product only for its intended purpose. Use only with recommended accessories and components supplied with the product. Improper use or wrong operation may lead to hazards.
3. Never leave the product unsupervised or unattended while it is switched ON.
4. Do not place heavy objects on top of the product.
5. WARNING! To protect against fire, electric shock and injury to persons. Do not immerse the milk frother or the power base in water or any other liquids. Never place the milk frother under running water to clean. Do not place the product in the dishwasher.
6. If the supply cord is damaged, it must be replaced by qualified electrical person in order to avoid a hazard or the product must be disposed.
7. The mains voltage must match the information on the rating label of the product.
8. Avoid damages to the power cord. Do not allow the power cord to kink or come in contact with sharp comers.
9. Keep this product including power cord and plug away from all heat sources, i.e. ovens, hot plates and other heat-producing devices/objects.
10. Only unplug from the power socket do not pull on the cord.
11. Disconnect the product from mains power
    • when the product is not being used;
    • in case of malfunctions;
    • before attaching/detaching accessories;
    • before cleaning and storing the product.
12. Use the product only in dry locations indoors, never use it outside.
13. Place the product on a stable, level, and slip resistant surface.
14. Protect the product from extreme heat and cold, direct sunlight and dust.
15. In order to reduce the risk of fire and electric shock, do not expose the product to fire (fireplace, grill, candles, cigarettes etc.) or water (water drops, water splashes, vases, tubes, ponds, etc.).
16. CAUTION : Risk of burns! Avoid contact with hot surfaces and escaping steam. Hold the product only by the handle.
17. Keep a sufficient safety clearance around the product. Hot milk can cause severe scalding.
18. Do not move or transport the product during use or while there is hot milk in the thermos can. Spraying hot milk poses a risk of burning.
19. Operate the product only when it is filled with milk.
20. Close the lid when frothing or heating.
21. The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock or injury to persons. This product is not suitable for commercial use. It is designed for household use only.
22. Do not touch hot surfaces. Use handles or knobs.
23. Close supervision is necessary when any appliance is used by or near children.
24. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
25. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment.
26. Do not use outdoors.
27. Do not let cord hang over edge of table or counter, or touch hot surfaces.
28. Do not place on or near a hot gas or electric burner, or in a heated oven.
29. To disconnect, turn any control to ″off″, then remove plug from wall outlet.
30. Scalding may occur if the lid is removed during the brewing cycles.
31. To reduce the risk of injury, do not drape cord over the counter top or table top where it can be pulled on by children or tripped over unintentionally.
32. • A short power-supply cord is provided to reduce risks resulting from becoming entangled in or tripping over a longer cord.
    • b) Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use.
    • c) If a long detachable power-supply cord or extension cord is used:
    1. The marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance.
    2. The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over.
33. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.

ADDITIONAL IMPORTANT SAFEGUARDS

1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instructions concerning use of the appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
3. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.
4. Keep the product and its cord out of reach of children aged less than 8 years.
5. Caution! To avoid hazards caused by inadvertent resetting of the safety temperature limitei; the product must not be connected to an external switching device such as a timer switch or connected to an electrical circuit that is regularly switched ON and OFF.
6. This appliance is intended to be used indoors in household and similar applications such as: staff kitchen areas in shops, offices and other working environments, farm houses, by clients in hotels, motels and other residential type environments, bed and breakfast type environments.
7. DO NOT fill with milk over the maximum level capacity.
8. DO NOT use the milk frother to heat oil, or to melt butter.
9. DO NOT place any container inside the milk frother -milk must be removed from the packaging, container, can, etc. before being put into the carafe.
10. Do not use the appliance to warm milk for a baby.
11. Warning! Never open the lid during the frothing or heating process.
12. Warning! Avoid liquid spillage on the electrical connectors.
13. Warning! Handle with care. The heating element surface is subject to residue heat after use.
14. Use the product only with the base provided.
15. The product must not be immersed in water for cleaning.
16. Switch OFF the appliance and disconnect from mains supply before changing accessories or approaching parts that move in use.
17. Be careful when hot liquid is poured from the milk frother, as it can be ejected out of the appliance due to a sudden steaming.
18. Clean the product and any accessories thoroughly after each use. Refer to CLEANING AND CARE section.

PRODUCT INSTRUCTION

OPERATING INSTRUSTIONS

Before The First Use

• Unpack the box with care, remove all the packing materials away from the appliance and keep it for later use;
• Keep the packing material(bag and etc.) away from children for safety;
• Before using the appliance for the first time, please clean the jug and the accessories as described under the chapter “Cleaning and maintenance” to remove the dust or production residues;

Operating Steps

• Choose the proper whisk and set it inside the jug;
• Pour desired milk into the jug but no more than the maximum volume (Refer to the above table ) to avoid overflow;
• Push the relevant button to start the appliance and it stops automatically when ready; then enjoy at once with the fresh frothed/heated milk!

Indicator Instruction

• Standby mode: After plugged into the power, buttons will blink once and then extinguish.
• Frothing hot milk: Press the hot milk button (higher one) then the light turns into steady red, the machine starts heating and frothing till it stops automatically, then pour the frothed milk into your cup as quick as possible for a quick and perfect hot drink.
• Heating milk: Install the respected whisk(the one without spring), pour desired milk into the jug but no more than 250ml, and do the same as above to get hot milk without frothing.
• Frothing cold milk: Press the cold milk button then the light turns into steady blue, which means the milk is well frothed. The machine will stop automatically when finishing.
• Press the corresponding button again to stop the function during frothing or heating when necessary.

Hints and tips:
Here are some handy hints to help you get the best from your frother.

• Always use your frother first to froth or heating your milk. While it is operating, prepare your coffee or hot chocolate and serve immediately.
• Use whole milk (fat content ≥3.0%) for best result.
• Milk heats to approximately 65-75℃, which is the ideal temperature to ensure the flavor of your coffee is not impaired and so you don’t have to wait too long until you can start enjoying your drink.
• Keep your whisks in a safe place to prevent from missing.
• After frothing or heating, rest the thermostat for 2 minutes before using. Also you can rinse under water to short the time.
• How to achieve the perfect frothed milk:
• Non-fat or skimmed milk provides the largest foam bubbles and is the easiest for the beginners. Since there is no fat in the milk, the result is light and airy but flavor is not as rich as other types of milk.
• 2% milk will also foam effortlessly as well as add a more creamy taste than non-fact milk.
• Whole milk is more challenging to achieve the most decadent, rich tasting Cappuccino.

TIPS FOR EASY DRINKS

SPECIFICATION

• Rated Voltage: AC120V Rated Frequency: 60Hz
• Rated Power: 550W N.W./G.W.: 840g/950g
• Max. Frothing Capacity: 120ml Protection Class: I
• Product Size: 172×110×183mm (L×W×H)

TROUBLES SHOOTING

on the base
No power in the socket| Check the electric circuit
Problems with electric elements| Repair
Jug ceases to work after starting operation| Jug temperature is too high| Rinse cold water inside the jug to reduce the temperature
Jug damaged with immersion in water| repair
Motor doesn’t work| Jug is not cleaned in time after use, milk locks the mechanism| Clean and move the shaft sleeve of motor by hand to loosen it
Motor damage| repair
No heating| Machine damage| repair

Charring

| Dosage of milk either too little or too much| Use the dosage of milk according to the dial
Jug reused without cleaning| Cleaning in time after use
Actual voltage much lower than

specified voltage

| Use the appropriate voltage
Quality of milk froth not up to standard| Wrong milk type or temperature| Make sure to use whole or semi-skimmed milk at refrigerator

temperature (about 6-8 °C)

Wrong whisk used| Make sure to use the appropriate whisk
Jug reused without cleaning| Make sure the jug is clean

CLEANING AND CARE

1. NOTE: To reduce build-up of milk residue, always empty any residual milk and clean immediately after frothing is convicted. Never leave liquid in the milk frother overnight.
2. Unplug the power base from the electrical outlet and let the milk frother cool down completely before cleaning.
3. Clean the inside of the jug with a damp & soft cloth, or sponge. Only the whisk can be detached to rinse with water.
4. If necessary, put on the whisk attachment to the whisk head. Fill clean water to MAX. level mark, then add a couple drops of mild liquid soap. Turn the milk frother ON and allow the soapy water to clean the jug. After the milk frother turns itself OFF, discard the soap water. Pour fresh clean water into the jug and discard; repeat until soap residue is completely removed. Wipe out with damp cloth.
5. WARNING! Do not immerse the milk frother or the power base in water or any other liquid. Never place the milk frother under running water to clean. Do not place in the dishwash en.
6. Make sure that all electrical connectors and sockets are kept dry.
7. Rinse lid and whisk in clean water and dry thoroughly.
8. Never use any solvents or abrasive cleaning agents, hard brushes, metal or sharp objects to clean. Solvents are hazardous to health and harm the product5s plastic parts; abrasive cleaning agents and cleaning accessories may scratch the product5s surfaces.
9. Any other servicing should be performed by an authorized service representative.

UNPACKING AND CHECKING THE PRODUCT

1. Remove the product and accessories carefully from their original packaging.
2. Check whether the contents of the packaging are complete or damaged. If the contents of the packing are incomplete or if damage is detected, please return the product to us.
3. No Hazard! Keep packaging materials out of reach of young children.

INTENDED USE

1. This product is suitable for heating and frothing milk only. Any other use may result in damage to product and/or injuries.

DRY PROTECTION

1. If there isn’t sufficient milk in the milk frother, it will shut OFF automatically. Nevertheless, always ensure that there is enough milk in the product, as switching the device OFF automatically can shorten its life span.
2. Allow the product to cool down before filling it again.

STORAGE

1. Unplug the milk frother and allow it to cool.
2. Store in its box in a cool and dry place.
3. Never store the appliance while it is still connected to mains power.
4. Never wrap cord tightly around the appliance.
5. Do not put any stress on the cord where it enters the appliance as it may cause the cord to fray and break.

Brand Owner ：Shanghai Starship Electronic Commerce Co., Ltd.
Manufacturer： Ningbo Turando Electrical Appliances Co., Ltd. 358 Weisan Road, Andong Town, Hangzhou Bay New Zone, Ningbo, Zhejiang, China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>