Thomas and Betts B14-6 Non Insulated Ring Terminal Instructions

: June 16, 2024
: Thomas and Betts

Table of Contents

Thomas and Betts B14-6 Non Insulated Ring Terminal
Product Information
Product Usage Instructions
Frequently Asked Questions (FAQ)
INTRODUCTIONS
6, Wire Range #18-#14 AWG, Copper, Tin Plated
Packaging
Documents / Support Tools
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Thomas and Betts B14-6 Non Insulated Ring Terminal

Thomas-and-Betts-B14-6-Non-Insulated-Ring-Terminal-
PRODUCT

Product Information

Specifications

Catalog Number: B14-6
Product ID: 7TAI029580R0011
UPC Number: 78621080315
EAN Number: 05414363148449
Status: A
Length: 0.72 Inches
Width: 0.25 Inches
Bolt Hole: #6
Wire Range: #18-#14 AWG
Material: Copper
Surface Protection: Tin Plated
Voltage Rating: 600 V
Colour: Metallic

Product Usage Instructions

Step 1: Prepare the wire

Strip the insulation from the end of the wire using wire strippers. Make sure to expose the appropriate length of bare wire for proper connection.

Step 2: Insert the wire into the ring terminal

Insert the stripped end of the wire into the ring-shaped opening of the terminal. Ensure that the wire is fully inserted and making good contact with the terminal.

Step 3: Crimp the terminal

Using a crimping tool, apply pressure to the terminal to securely crimp it onto the wire. Make sure to use a crimping tool with a single indentor or a double indentor for solid wire, as recommended by the manufacturer.

Step 4: Check the connection

After crimping the terminal, visually inspect the connection to ensure it is secure and there are no loose wires. Give the wire a gentle tug to verify that it is firmly attached to the terminal.

Step 5: Repeat for additional wires

If you have multiple wires to connect, repeat steps 1 to 4 for each wire, ensuring that you use the appropriate ring terminal size for each wire’s gauge.

Frequently Asked Questions (FAQ)

Q: What is the voltage rating of this ring terminal?
A: The voltage rating of this ring terminal is 600 V.
Q: Can I use this ring terminal for solid wire?
A: Yes, this ring terminal can be used with both stranded and solid wire. However, it is recommended to use a crimping tool with a double indentor for solid wire.
Q: What is the AWG range for this ring terminal?
A: The AWG range for this ring terminal is #18-#14.
Q: Is there any insulation on this ring terminal?
A: No, this ring terminal is non-insulated, meaning it does not have any insulation covering.
Q: How can I obtain further technical assistance?
A: For further technical assistance, please contact ABB Installation Products Technical Support at the following:

INTRODUCTIONS

Catalog Number: B14-6
Product ID: 7TAI029580R0011
UPC Number: 78621080315
EAN Number: 05414363148449
Status: A

Non-Insulated Ring Terminal, Length .72 Inches, Width .25 Inches, Bolt Hole

6, Wire Range #18-#14 AWG, Copper, Tin Plated

These non-insulated ring terminals are made of electrolytic copper for high conductivity.
They can be installed with crimping tools having a single indentor or double indentor (recommended for solid wire).
Serrated barrel increases grip on wire.
Application Tools: WT110M, WT111M, WT112M, WT2000, ERG4002
Alternate Package Qty: B133

Representative

North American Specifications (UNSPSC)

UNSPSC: 39121432 Electrical terminals
IGCC: 4603 Electrical terminals
Type: Non-Insulated Ring Terminal
Special Features: These non-insulated ring terminals are made of electrolytic copper for high conductivity. They can be installed with crimping tools having a single indentor or double indentor (recommended for solid wire). Serrated barrel increases grip on wire.
Standard: UL E9809
Wire Size: 18-14 AWG
Voltage Rating: 600 V
Material: Copper
Colour: Metallic