PM POPMAKE QS70-WIFI Security Cameras Wireless Outdoor 2K 360 Degree User Guide
- June 16, 2024
- PM POPMAKE
Table of Contents
PM POPMAKE QS70-WIFI Security Cameras Wireless Outdoor 2K 360 Degree
Product Information
Specifications
| Feature | Description |
|---|---|
| SD Card Insertion | Insert after network pairing, with the camera powered off. |
| Field of View | Ensure open view, and adjust via the UBox app for night vision. |
| Charging Port | Use with waterproof rubber, and ensure it is sealed. |
Camera Usage Instructions
Notes on Inserting SD Card
- Please note that do not insert the SD card into the camera before the initial network pairing connection. Otherwise, the network connection might fail.
- It is recommended to power off the camera before inserting or removing the SD card from the camera.
There is an illustration showing the correct orientation for inserting an SD card into the camera. The camera is depicted with a side panel open, exposing the Micro SD Card Slot and a Reset button. An arrow points to the slot, and a green checkmark indicates the correct insertion method, while a red cross marks a depiction of incorrect SD card exposure to indicate improper insertion.
Notes on Camera’s Field of View
- Please face the camera towards a place with an open field of view. Night vision requires reflected infrared light for image acquisition. The reflection of the wall may lead to infrared overexposure or a dark image.
- Please adjust the camera angle properly via live view in the UBox app.
Diagrams depict the camera mounted on a wall with two contrasting scenarios: one with a clear field of view, marked by a green check, and another pointing towards a wall, which is marked with a red cross, indicating an incorrect setup that could lead to poor night vision due to reflected infrared light.
Notes on Plugging in the Charging Cable
- Open the waterproof rubber of the charging port completely, pass the charging cable through the rubber, and then fully insert it into the charging port.
- Press the rubber gently to make sure the charging port is sealed. Otherwise, the camera would not be waterproof and fully charged.
- Note: Do not directly insert the charging cable into the charging port without waterproof rubber.
- After inserting the charging cable into the charging port, close the waterproof rubber.
- Attention: When the waterproof rubber is removed, the camera will not be waterproof and extremely easy to be damaged.
Illustrations demonstrate the correct and incorrect methods to plug in the charging cable. The correct method shows the cable passing through the rubber port with the waterproof rubber properly sealed, while the incorrect method shows the cable not fully inserted, with a gap visible, and another with the waterproof cover fully open.
Inserting SD Card
- Please note that do not insert the SD card into the camera before the initial network pairing connection. Otherwise, the network connection might fail.
- It is recommended to power off the camera before inserting or removing the SD card from the camera.
Camera’s Field Of View
- Please face the camera towards a place with an open field of view. Night vision requires reflected infrared light for image acquisition. The reflection of the wall may lead to infrared overexposure or a dark image.
- Please adjust the camera angle properly via live view in the UBox app.
Plugging In The Charging Cable
- Open the waterproof rubber of the charging port completely, pass the charging cable through the rubber, and then fully insert it into the charging port.
- Press the rubber gently to make sure the charging port is sealed. Otherwise, the camera would not be waterproof and fully charged.
- Note: Do not directly insert the charging cable into the charging port without waterproof rubber.
- After inserting the charging cable into the charging port, close the waterproof rubber.
- Attention: When the waterproof rubber is removed, the camera will not be waterproof and extremely easy to be damaged.
FAQ
-
Can I insert the SD card while the camera is on?
No, you should power off the camera before inserting or removing the SD card. -
Why is my camera’s night vision poor?
Ensure the camera is not facing a wall or close surface. Night vision works best with an open field of view. -
Is it necessary to use waterproof rubber when charging?
Yes, to ensure the camera remains waterproof, always use the waterproof rubber when plugging in the charging cable.