Bestway 43730 Coral Bliss Swim Tube Instructions
- June 16, 2024
- Bestway
Table of Contents
Bestway 43730 Coral Bliss Swim Tube
Product Information
The product is a swimming float designed for swimmers. It comes in various sizes:
- 1.02m x 94cm / 40 x 37 (Item No: 43097)
- 1.36m x 1.31m / 53.5 x 51.5 (Item No: 36123)
- 1.65m x 1.17m / 65 x 46 (Item No: 36124)
- 1.18m x 1.17m / 46.5 x 46 (Item No: 43186)
- 1.17m x 1.17m / 46 x 46 (Item No: 43509)
- 1.18m x 1.17m / 46.5 x 46 (Item No: 43637)
- 1.18m x 1.17m / 46.5 x 46 (Item No: 43643)
- 1.07m / 42 (Item No: 43647)
- 1.07m x 1.13m / 42 x 44.5 (Item No: 43730)
Specifications
- Design Working Pressure: 0.03 BAR
- Maximum Load Capacity: … kg
- Safe Distance to Shore: 10m
Product Usage Instructions
Inflation
- Before using the product, carefully check if there are any leaks or broken parts.
- Open the safety valve and inflate the product using an air pump (not included) until it reaches the design working pressure of 0.03 BAR.
- Fill the chambers until most of the wrinkles are gone and it feels firm to touch but NOT hard. If you use other
Deflation
To deflate the product, open and pinch the bottom of the valves.
Maintenance and Storage
- After deflation, use a damp cloth to gently clean all surfaces. Note: Never use solvents or other chemicals that may damage the product.
- Store the product in a cool, dry place and out of children’s reach.
- Check the product for damage at the beginning of each season and at regular intervals when in use.
Repair
|If a chamber is damaged, follow these steps to repair it:
- Clean the area to be repaired.
- Carefully peel the provided repair patch.
- Press the patch over the damaged area.
- Wait for 30 minutes before inflating the product again.
2023 Bestway Inflatables & Material Corp. All rights reserved certains pays Bestway Inflatables & Material Corp., Shanghai, China Manufactured, distributed and represented in the European Union by/ Distributed in Latin America by Distributed in Australia & New Zealand by Bestway Australia Pty Ltd, Unit 2/98-104 Carnarvon St Silverwater, NSW 2128, Australia Tel: Australia: +61 2 9037 1388; New Zealand: 0800 142 101 Distributed in United Kingdom by Bestway Corp UK Ltd. 8 Wentworth Road, Heathfield Industrial Estate, Newton Abbot, Devon, TQ12 6TL Exported by/Exporté par/Exportado por/Exportiert von/Esportato da Bestway (Hong Kong) International Ltd./Bestway Enterprise Company Limited Suite 713, 7/Floor, East Wing, Tsim Sha Tsui Centre, 66 Mody Road, Kowloon, Hong Kong www.bestwaycorp.com
- WARNING
- PROHIBITION
- MANDATORY
- RISK OF GETTING ENTRAPPED IF SIZE IS NOT APPROPRIATE
- NO PROTECTION AGAINST DROWNING
- DESIGN WORKING PRESSURE: 0.03 BAR
- DO NOT USE IN OFFSHORE WIND
- DO NOT USE IN OFFSHORE CURRENT
- DO NOT USE IN WHITE WATER
- DO NOT USE IN BRAKING WAVES
- NOT FOR CHILDREN…YEARS OF AGE AND BELOW, APPLY ONLY TO CHILDREN ABOVE…YEARS OF AGE
- READ INSTRUCTIONS FIRST
- NUMBER OF USERS, … ADULT / … CHILD
- SWIMMERS ONLY
- MAXIMUM LOAD CAPACITY … KG
- SAFE DISTANCE TO SHORE 10M
- SIZE DESIGNATION, INTERIOR SIZE: … CM
- AVOID ENTRAPMENT, ENSURE LOOSE FIT
- FULLY INFLATE ALL AIR CHAMBERS
- ALWAYS SUPERVISE CHILDREN IN WATER
- DEVICE REQUIRES BALANCING
For detailed information please refer to the following table:
WARNING
Non-compliance with these operating instructions may expose you to serious
danger.
- ATTENTION! NO PROTECTION AGAINST DROWNING!
- SWIMMERS ONLY!
- Evenly distribute loads when using the product. Tipping and drowning may occur with uneven distribution of loads.
TECHNICAL SAFETY INSTRUCTIONS
Read the manual and follow the instructions relating to safety tips, correct
and complete product assembly, setting into service, use, and maintenance. For
your own safety, always heed the advice and warnings in these instructions.
Only use the product in the places and conditions for which it is intended.
- Full inflate all air chambers.
- Passenger numbers and load weight shall by no means exceed passenger number and maximum weight capacity in specifications.
- This product should not be used as a life-saving device.
- Life-saving devices (life jackets and life buoys) must be prepared together and inspected.
- Keep away from flames and fires.
- Before every use, carefully inspect all product components, to ensure everything is in good condition and tightly secured. Please stop to repair if you find any damage.
- Be careful when landing on the ground. Sharp and rough objects such as rocks, cement, shells, glass, etc. may puncture the product.
- Don’t leave the product exposed to the sun for long periods of time, as high temperatures shall give rise to air expansion, which can cause irreparable damage.
- Never leave in or near the water when not in use.
INFLATION
- Before using the product, carefully check if there are any leaks or broken parts. Open the safety valve and inflate it with the air pump (not included) to design working pressure on the product.
- Fill the chambers until most of the wrinkles are gone and it feels firm to touch but NOT hard. If you use another pressure gauge, the pressure should not be more than the specified pressure on the product or on the instruction. Do not over-inflate the product. Do not use an air compressor. NOTE : Under and over-inflation of the product will result in safety hazards. It is better to check the pressure of the product each time before using it.
- Be sure to close the valves after inflation, and press in the safety valves after inflation. NOTE : Never stand on or rest objects on the product during inflation. Always check the product for leaks before use.
DEFLATION
Open and pinch the bottom of the valves to deflate.
MAINTENANCE AND STORAGE
- After deflation, use a damp cloth to gently clean all surfaces. NOTE : Never use solvents or other chemicals that may damage the product.
- Store in a cool, dry place and out of children’s reach.
- Check the product for damage at the beginning of each season and at regular intervals when in use.
REPAIR
If a chamber is damaged use the provided repair patch.
- Clean area to be repaired.
- Carefully peel the patch.
- Press the patch over the area to be repaired.
- Wait 30 minutes before inflation.
FAQs
Q: What is the maximum load capacity of the product?
A: The maximum load capacity is not specified.
Q: What is the safe distance to shore when using the product?
A: The safe distance to shore is 10m.
Q: Can children use this product?
A: The product is not recommended for children below a certain age. Please refer to the instructions for the age restriction.