HOVER ZZ-H-1-001 X1 Self Flying Camera User Guide

HOVER ZZ-H-1-001 X1 Self Flying Camera

OVERVIEW

1. Power & Takeoff Button
2. Made Button
3. Status Indicator
4. Battery
5. Battery Level Indicator
6. Cimbal Camera
7. Status Indicator
8. Motor
9. Propeller
10. Heat Vents
11. Downward Vision System
12. Prop Guard

INSTRUCTION

Step 1 Download App

• Scan the QR code below to download and install Hover XI App.
  This guide is subject to change Without prior notice. Please visit our official website for user manual and other latest information.

Step 2 Charge the battery

• before you use Hover Camera XI for the first time, be sure to charge it.

Step 3 Power on

• Press and hold power button for 2 seconds until the voice prompt is heard, and the status indicator will light on in green.

Step 4 Mode selection and fly

• Spread Hover Camera XI as shown below. You can switch modes using the mode button. Hold Hover Camera XI horizontally. Press the power button.
• All propellers will start spinning. Release Hover Camera XI and it will perform the flight.
• Take off

Step 5 Collect Hover Camera X1

• Pick up Hover Camera XI in flight and press the power button or flip it by 180*. and the propellers will stop spinning.
• Put your hand 20 cm below Hover Camera XI, and it will automatically land on your hand and stop propeller spinning.

CAUTION

DO NOT stick any finger or anything else into the propeller area.
Please refer to the safety instruction manual and disclaimer on zzrobotics.com/support for more information.

Step 6 App connection

• Open the Hover Xl App and enjoy flying Hover Camera XI.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>