PHAT PT-BK-219-Blue Kids Balance Tricycle Instruction Manual
- June 4, 2024
- PHAT
Table of Contents
PT-BK-219-Blue Kids Balance Tricycle
Instruction Manual
PT-BK-219-Blue Kids Balance Tricycle
Product Instruction
Product Name: Kids Balance
Tricycle Model: PT-BK-219-Blue
Safety warning:
Please read this manual carefully before use and keep it properly for future reference. If not in accordance with this manualUse may affect the safety of children. 12-36 months/weight limit less than 25kg
- The caregiver shall not leave when the child is riding;
- This product must be assembled by adults and used under adult supervision;
- It will be very dangerous to hit people or objects. Play after confirming that there are no obstacles around;
- Please do not go on the ramp, concave-convex surface, very uneven road surface, near the ditch, stairs, porch, and other obstacles Use in places with inclined surfaces and near open fires;
- Roads, parking lots, and other public transport roads are prohibited; Such toys require high skills to ensure users And third parties from falling and collision injuries, please use them with caution. Wear protective equipment, such as helmets, knee pads, etc.
- Do not use when the weight exceeds 25kg;
- Please be careful not to let your fingers, hair, and clothes get involved around the wheel and rotating parts;
- Please be sure not to use one product for two people at the same time;
- Do not use the product for other purposes than passenger use, and do not use the product for other purposes such as treads;
- Do not use this product when the product is damaged, deformed, or faulty;
- Please do not put it in the rain and pay attention to moisture;
- Danger may occur when the product is used in a state of failure. The guardian must regularly check the integrity of the product Status;
- This product contains small parts and sham edges before assembly. It is only for adults to assemble and give it to children to play with;
- After the packing box is opened, the plastic packing bag shall be put away in time to avoid suffocation caused by children playing;
- Do not place any load on the vehicle, otherwise, it will affect the stability of the vehicle;
Installation Step:
Step 1 : First remove the snap ring at both ends of the front wheel iron
shaft, pass the iron shaft through the plastic parts of the front fork of the
vehicle body, and expose both ends of the iron shaft. Then insert the two
front wheels into both ends of the iron shaft respectively, re-fasten the two
snap ring buckles to the exposed iron shaft groove on the outside of the
wheel, and cover the front wheel cover.
Step 2: screw the circular
lower cover over the front wheel assembly and tighten it.
Step 3: Insert the front handle assembly into the square iron pipe of the
body assembly, and make the snap buckle in the square pipe buckle the front
handle
Step 4: Insert the rear wheel assembly into the rear of the body assembly,
and make the spring buckle behind the body assembly buckle the hole of the
rear wheel assembly.
Step 5 : insert the seat into the iron sheet of the body assembly, and
make the button on the bottom of the seat buckle the hole of the iron sheet of
the body. 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>