QAZQA 96786 LED Wall Lamp Instruction Manual

QAZQA 96786 LED Wall Lamp

PRODUCT INFORMATION

Specifications:

• Overall Size: 3CM x 9CM x 11.5CM
• Wall Lamp incl.LED QL7001129 2x380lm Module 486lm Lamp 2×3.2W
• Module 9W Lamp
• Power Supply: 220-240V~ 50Hz
• Color Temperature: 2700K
• Color Rendering Index (CRI): >80
• Lifetime: 25000 hours
• Energy Efficiency Class: E

PRODUCT INSTRUCTION

Safety Instructions:

1. The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
2. Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
3. The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance, or repair work is undertaken.
4. Exterior lighting must not be installed during rain.
5. Take account of the minimal separation distance from other objects and the room required around the fitting.
6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components.
8. Take account of all available technical information.
9. Meaning of symbols:
   • For indoor use only, where direct contact with water is impossible
   • IPXX: This icon indicates the level of water-proof and dust-proof
   • Protection Class I: the fitting must be earthed
   • Protection Class II: the fitting is double insulated and does not require earthing
   • Protection Class III: the fitting is low-voltage
   • 0.5m: Minimum distance from lighted objects (meters)
   • The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceeded; different items require different kinds of light sources with different bulb icons
   • Max.50W: Maximum wattage
   • 220-240V~: The armature is designed to work only with the indicated voltage. Different items require different working voltages.
   • The luminaire can be used in combination with a dimmer
   • Light Angle
   • This luminaire cannot be disposed of together with normal domestic waste in a standard rubbish can, but you have to bring it to a staging area for electrical waste

FAQ

Q: Can I install the luminaire myself?

A: The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.

Q: Can I clean the luminaire with solvents or abrasives?

A: No, you should clean the luminaire with a clean, dry cloth or brush, avoiding solvents or abrasives.

Q: Can the luminaire be used outdoors?

A: No, the luminaire is designed for indoor use only, where direct contact with water is impossible.

INSTALLATION

Batt WL 9W
96786 / 96787 / 103193 / 106722

Overall Size:

Specifications

• Wall Lamp
• incl.LED QL7001129
• 2x380lm Module
• 486lm Lamp
• 2×3.2W Module
• 9W Lamp
• 220-240V~50Hz
• 2700K
• CRI>80
• 25000 h
• 10000 ON/OFF

Dimensions

96786 / 96787 / 103193 / 106722
2×3.2W LED
incl. LED Board: QL7001129
220-240V~50Hz

This product contains a light source of energy efficiency class E

• 96786:
  8718881082979

• 96787:
  8718881082986

• 103193:
  8718881115967

• 106722:
  8718881150173

Features

• Replaceable (LED only) light source by a professional.

• Replaceable control gear by a professional.

SAFETY INSTRUCTION

Please study the instruction manual and the below information carefully before installing or using this product.
Please keep this user manual for further reference

1. The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
2. Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
3. The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
4. Exterior lighting must not be installed during rain.
5. Take account of the minimal separation distance from other objects and the room required around the fitting.
6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
8. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
9. Take account of all available technical information.

Meaning of symbols:

For indoor use only, where direct contact with water is impossible

• Protection Class I: the fitting must be earthed
• Protection Class II: the fitting is doubled insulated and does not require earthing
• Protection Class III: the fitting is low-voltage
• Minimum distance from lighted objects (meters)
• The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceed; different items require different kinds of light sources with different bulb icons
• The armature is designed to work only with the indicated voltage. Different items require different working voltage.
• The luminaire can be used in combination with a dimmer
• The reference light angle and light space of the luminaire
• This luminaire cannot be disposed of together with normal domestic waste in a standard rubbish can, but you have to bring it to a staging area for electrical waste
• This icon indicates the level of water-proof and dust-proof

Take note of the symbols when connecting wires:

• Live Conductor
• Earth Conductor
• Neutral Conductor

FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert, The Netherlands
www.qazqa.nl

References

• QAZQA - Quite Unique | QAZQA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>